From: horms+renesas@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/3] arm64: dts: salvator-x: add Salvator-X board on R8A7796 SoC
Date: Tue, 24 May 2016 10:54:39 +0900 [thread overview]
Message-ID: <1464054880-25843-3-git-send-email-horms+renesas@verge.net.au> (raw)
In-Reply-To: <1464054880-25843-1-git-send-email-horms+renesas@verge.net.au>
From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
This patch adds initial board support for R8A7796 Salvator-X.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
--
v2 [Simon Horman]
* Added Reviewed-by tag from Geert Uytterhoeven
v1 [Simon Horman]
* Drop use of pfc, that can be added once pfc support is present in mainline
* Set size of memory (bank 0) to 2GiB instead of 1GiB
* Omit scif0
* Add scif_clk, from patch by Hiromitsu Yamasaki
v0 [Takeshi Kihara]
---
arch/arm64/boot/dts/renesas/Makefile | 1 +
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 45 ++++++++++++++++++++++
2 files changed, 46 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 9ce1890a650e..17139f7003a6 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,4 +1,5 @@
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb
always := $(dtb-y)
clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
new file mode 100644
index 000000000000..9c52613fb88c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -0,0 +1,45 @@
+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7796.dtsi"
+
+/ {
+ model = "Renesas Salvator-X board based on r8a7796";
+ compatible = "renesas,salvator-x", "renesas,r8a7796";
+
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&scif2 {
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
--
2.1.4
next prev parent reply other threads:[~2016-05-24 1:54 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-24 1:54 [PATCH v3 0/3] arm64: Add Renesas R8A7796 SoC support Simon Horman
2016-05-24 1:54 ` [PATCH v3 1/3] arm64: dts: r8a7796: " Simon Horman
2016-05-24 5:30 ` Dirk Behme
2016-05-25 0:48 ` Simon Horman
2016-05-25 5:10 ` Dirk Behme
2016-05-25 7:32 ` Dirk Behme
2016-05-26 7:03 ` Geert Uytterhoeven
2016-05-26 7:32 ` Dirk Behme
2016-05-26 8:05 ` Geert Uytterhoeven
2016-05-26 8:11 ` Dirk Behme
2016-05-26 2:28 ` Simon Horman
2016-05-26 7:14 ` Dirk Behme
2016-05-27 0:42 ` Simon Horman
2016-05-27 6:39 ` Geert Uytterhoeven
2016-05-27 7:32 ` Dirk Behme
2016-06-29 8:15 ` Dirk Behme
2016-07-20 23:51 ` Simon Horman
2016-07-21 5:20 ` Dirk Behme
2016-07-22 1:47 ` Simon Horman
2016-05-25 7:38 ` Dirk Behme
2016-05-26 2:31 ` Simon Horman
2016-05-24 1:54 ` Simon Horman [this message]
2016-05-24 1:54 ` [PATCH v3 3/3] arm64: defconfig: enable Renesas R8A7796 SoC Simon Horman
2016-06-06 1:33 ` [PATCH v3 0/3] arm64: Add Renesas R8A7796 SoC support Simon Horman
2016-06-06 1:52 ` Simon Horman
2016-06-24 3:05 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464054880-25843-3-git-send-email-horms+renesas@verge.net.au \
--to=horms+renesas@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).