From: ayaka@soulik.info (Randy Li)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: dts: move regulator settings from common to specifics
Date: Thu, 7 Jul 2016 02:22:59 +0800 [thread overview]
Message-ID: <1467829380-16242-3-git-send-email-ayaka@soulik.info> (raw)
In-Reply-To: <1467829380-16242-1-git-send-email-ayaka@soulik.info>
The regulator settings are the same in the firefly beta and
firefly release version. But the firefly reload is different.
I remove the different part from the common header dtsi file,
but remained those common one to keep references.
Signed-off-by: Randy Li <ayaka@soulik.info>
---
arch/arm/boot/dts/rk3288-firefly-beta.dts | 30 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/rk3288-firefly.dts | 30 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/rk3288-firefly.dtsi | 12 +++++-------
3 files changed, 65 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts
index 75d77e3..375c5d8 100644
--- a/arch/arm/boot/dts/rk3288-firefly-beta.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts
@@ -69,3 +69,33 @@
&pwm0 {
status = "okay";
};
+
+&gmac {
+ phy-supply = <&vcc_lan>;
+};
+
+&io_domains {
+ audio-supply = <&vcca_33>;
+ flash1-supply = <&vcc_lan>;
+};
+
+&act8846_regs {
+ vcca_18: REG7 {
+ regulator-name = "vcca_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcca_33: REG8 {
+ regulator-name = "vcca_33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_lan: REG9 {
+ regulator-name = "vcc_lan";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts
index c07fe92..e89e575 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dts
+++ b/arch/arm/boot/dts/rk3288-firefly.dts
@@ -69,3 +69,33 @@
&pwm1 {
status = "okay";
};
+
+&gmac {
+ phy-supply = <&vcc_lan>;
+};
+
+&io_domains {
+ audio-supply = <&vcca_33>;
+ flash1-supply = <&vcc_lan>;
+};
+
+&act8846_regs {
+ vcca_18: REG7 {
+ regulator-name = "vcca_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcca_33: REG8 {
+ regulator-name = "vcca_33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_lan: REG9 {
+ regulator-name = "vcc_lan";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 1d7f03c..194e05a 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -68,11 +68,9 @@
compatible = "rockchip,rk3288-io-voltage-domain";
rockchip,grf = <&grf>;
- audio-supply = <&vcca_33>;
bb-supply = <&vcc_io>;
dvp-supply = <&dovdd_1v8>;
flash0-supply = <&vcc_flash>;
- flash1-supply = <&vcc_lan>;
gpio30-supply = <&vcc_io>;
gpio1830-supply = <&vcc_io>;
lcdc-supply = <&vcc_io>;
@@ -225,7 +223,6 @@
clock_in_out = "input";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
- phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
@@ -296,7 +293,7 @@
inl2-supply = <&vcc_sys>;
inl3-supply = <&vcc_20>;
- regulators {
+ act8846_regs: regulators {
vcc_ddr: REG1 {
regulator-name = "vcc_ddr";
regulator-min-microvolt = <1200000>;
@@ -339,19 +336,20 @@
regulator-always-on;
};
- vcca_18: REG7 {
+ REG7 {
regulator-name = "vcca_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- vcca_33: REG8 {
+ REG8 {
regulator-name = "vcca_33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
- vcc_lan: REG9 {
+ REG9 {
regulator-name = "vcc_lan";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
--
2.7.4
next prev parent reply other threads:[~2016-07-06 18:22 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-06 15:25 [PATCH 0/3] ARM: dts: the dts support for rk3288 firefly reload ayaka
2016-07-06 15:25 ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi ayaka
2016-07-06 15:25 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics ayaka
2016-07-06 16:13 ` Heiko Stuebner
2016-07-06 17:34 ` [PATCH 0/3] " Randy Li
2016-07-06 17:34 ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi Randy Li
2016-07-06 17:34 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 17:34 ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload Randy Li
2016-07-06 17:52 ` [PATCH 0/3] Re:[PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 17:52 ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi Randy Li
2016-07-06 17:52 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 17:52 ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload Randy Li
2016-07-06 18:06 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 18:22 ` [PATCH 0/3] ARM: dts: the dts support for rk3288 firefly reload Randy Li
2016-07-06 18:22 ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi Randy Li
2016-07-06 18:22 ` Randy Li [this message]
2016-07-06 18:23 ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload Randy Li
2016-07-07 21:35 ` [PATCH 0/3] ARM: dts: the dts support for rk3288 firefly reload Heiko Stuebner
2016-07-09 15:42 ` ayaka
2016-07-09 23:06 ` Heiko Stuebner
2016-07-17 15:38 ` [PATCH] " Randy Li
2016-07-17 15:38 ` [PATCH] ARM: dts: add rk3288-firefly-reload Randy Li
2016-07-17 21:01 ` Rob Herring
2016-07-18 11:24 ` Heiko Stübner
2016-07-18 15:32 ` [PATCH v2] " Randy Li
2016-07-18 15:32 ` [PATCH] " Randy Li
2016-07-18 19:46 ` Heiko Stübner
2016-08-07 3:40 ` Shawn Lin
2016-08-07 14:44 ` Heiko Stuebner
2016-08-08 2:29 ` Shawn Lin
2016-08-09 9:28 ` 陈豪
2016-08-09 10:02 ` 陈豪
2016-08-09 10:06 ` Randy Li
2016-08-09 10:58 ` Heiko Stübner
2016-08-10 1:12 ` Randy Li
2016-08-14 11:27 ` [PATCH 0/2] ARM: dts: rockchip: correct the regulators in firefly reload Randy Li
2016-08-14 11:27 ` [PATCH 1/2] ARM: dts: rockchip: remove excess sd properties for " Randy Li
2016-08-14 12:30 ` Heiko Stuebner
2016-08-14 12:38 ` ayaka
2016-08-17 14:10 ` Heiko Stübner
2016-08-17 17:03 ` [PATCH 0/2 v2] ARM: dts: rockchip: correct the regulators in " Randy Li
2016-08-17 17:03 ` [PATCH 1/2] ARM: dts: rockchip: remove excess sd properties for " Randy Li
2016-08-18 13:35 ` Heiko Stübner
2016-08-18 14:20 ` ayaka
2016-08-17 17:03 ` [PATCH 2/2] ARM: dts: rockchip: add missing regulators for firefly reload board Randy Li
2016-08-18 16:47 ` Heiko Stübner
2016-08-14 11:27 ` Randy Li
2016-07-06 15:25 ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload ayaka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467829380-16242-3-git-send-email-ayaka@soulik.info \
--to=ayaka@soulik.info \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).