From: vw@iommu.org (Wan Zongshun)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/10] ARM: NUC900: Add NUC970 SoC support
Date: Sun, 10 Jul 2016 15:27:20 +0800 [thread overview]
Message-ID: <1468135649-19980-1-git-send-email-vw@iommu.org> (raw)
Hi,
This patch series added Nuvoton new SoC NUC970 development board
support, this nuc970 belongs to nuc900 series, but many features are
not compatible with old nuc900 SoCs like nuc910, nuc920.
Those patches are basing on old w90x900 codes, and are using standard
linux subsystem interface, such as dts, driver/clk, driver/clocksource
, driver/irqchip drivers.
The old w90x900 plat such as nuc910,nuc960 codes will also be changed
to new style according to nuc970 codes after those patches was accepted.
PATCH V2:
The V2 patches change some code style, re-archtect some drivers and add reset
and soc drivers, split some dts patches according to maillist's comments.
Wan Zongshun (10):
ARM: NUC900: Add nuc970 machine support
irqchip: add irqchip driver for nuc900
Clocksource: add nuc970 clocksource driver
clk: add Clock driver for nuc970
power/reset: Add reset driver support for nuc900
soc: Add SoC specific driver support for nuc900
ARM: dts: Add clock header file into dt-bindings
ARM: dts: nuc900: Add nuc970 dts files
Documentation: devicetree: Add dts description for nuc900
nuc900: add nuc970 platform defconfig file
.../devicetree/bindings/arm/nuvoton/nuc970.txt | 12 +
.../bindings/clock/nuvoton,nuc970-clk.txt | 13 +
.../interrupt-controller/nuvoton,nuc900-aic.txt | 15 +
.../bindings/reset/nuvoton,nuc900-reset.txt | 12 +
.../devicetree/bindings/serial/nuc970-uart.txt | 22 +
.../bindings/soc/nuvoton/nuvoton,nuc900-soc.txt | 12 +
.../bindings/timer/nuvoton,nuc970-tmr.txt | 20 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/nuc970-evb.dts | 34 +
arch/arm/boot/dts/nuc970.dtsi | 88 ++
arch/arm/configs/nuc970_defconfig | 76 ++
arch/arm/mach-w90x900/Kconfig | 20 +
arch/arm/mach-w90x900/Makefile | 3 +
arch/arm/mach-w90x900/include/mach/irqs.h | 5 +
arch/arm/mach-w90x900/nuc900.c | 41 +
drivers/clk/Makefile | 1 +
drivers/clk/nuc900/Makefile | 6 +
drivers/clk/nuc900/clk-apll.c | 168 ++++
drivers/clk/nuc900/clk-ccf.h | 53 ++
drivers/clk/nuc900/clk-nuc970.c | 925 +++++++++++++++++++++
drivers/clk/nuc900/clk-upll.c | 83 ++
drivers/clocksource/Kconfig | 8 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-nuc900.c | 305 +++++++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-nuc900.c | 150 ++++
drivers/power/reset/Kconfig | 7 +
drivers/power/reset/Makefile | 1 +
drivers/power/reset/nuc900-reset.c | 93 +++
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/nuvoton/Kconfig | 10 +
drivers/soc/nuvoton/Makefile | 1 +
drivers/soc/nuvoton/soc-nuc900.c | 100 +++
include/dt-bindings/clock/nuc970-clock.h | 233 ++++++
35 files changed, 2522 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt
create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,nuc970-clk.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/nuvoton,nuc900-aic.txt
create mode 100644 Documentation/devicetree/bindings/reset/nuvoton,nuc900-reset.txt
create mode 100644 Documentation/devicetree/bindings/serial/nuc970-uart.txt
create mode 100644 Documentation/devicetree/bindings/soc/nuvoton/nuvoton,nuc900-soc.txt
create mode 100644 Documentation/devicetree/bindings/timer/nuvoton,nuc970-tmr.txt
create mode 100644 arch/arm/boot/dts/nuc970-evb.dts
create mode 100644 arch/arm/boot/dts/nuc970.dtsi
create mode 100644 arch/arm/configs/nuc970_defconfig
create mode 100644 arch/arm/mach-w90x900/nuc900.c
create mode 100644 drivers/clk/nuc900/Makefile
create mode 100644 drivers/clk/nuc900/clk-apll.c
create mode 100644 drivers/clk/nuc900/clk-ccf.h
create mode 100644 drivers/clk/nuc900/clk-nuc970.c
create mode 100644 drivers/clk/nuc900/clk-upll.c
create mode 100644 drivers/clocksource/timer-nuc900.c
create mode 100644 drivers/irqchip/irq-nuc900.c
create mode 100644 drivers/power/reset/nuc900-reset.c
create mode 100644 drivers/soc/nuvoton/Kconfig
create mode 100644 drivers/soc/nuvoton/Makefile
create mode 100644 drivers/soc/nuvoton/soc-nuc900.c
create mode 100644 include/dt-bindings/clock/nuc970-clock.h
--
2.7.4
next reply other threads:[~2016-07-10 7:27 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-10 7:27 Wan Zongshun [this message]
2016-07-10 7:27 ` [PATCH v2 01/10] ARM: NUC900: Add nuc970 machine support Wan Zongshun
2016-07-10 22:11 ` Arnd Bergmann
2016-07-11 16:04 ` Arnd Bergmann
2016-07-12 4:30 ` Wan Zongshun
2016-07-12 7:14 ` Wan Zongshun
2016-07-12 8:23 ` Arnd Bergmann
2016-07-10 7:27 ` [PATCH v2 02/10] irqchip: add irqchip driver for nuc900 Wan Zongshun
2016-07-10 21:51 ` Paul Gortmaker
2016-07-11 2:19 ` Wan Zongshun
2016-07-11 15:46 ` Arnd Bergmann
2016-07-12 7:04 ` Wan Zongshun
2016-07-12 8:26 ` Arnd Bergmann
2016-07-14 8:52 ` Wan Zongshun
2016-07-14 11:09 ` Arnd Bergmann
2016-07-13 20:09 ` Jason Cooper
2016-07-14 3:36 ` Wan Zongshun
2016-07-14 13:54 ` Jason Cooper
2016-07-15 5:15 ` Wan Zongshun
2016-07-15 7:00 ` Arnd Bergmann
2016-07-15 9:44 ` Wan ZongShun
2016-07-15 10:02 ` Arnd Bergmann
2016-07-21 18:45 ` Jason Cooper
2016-07-15 15:45 ` Jason Cooper
2016-07-10 7:27 ` [PATCH v2 03/10] Clocksource: add nuc970 clocksource driver Wan Zongshun
2016-07-11 15:36 ` Arnd Bergmann
2016-07-12 7:32 ` Wan Zongshun
2016-07-12 8:28 ` Arnd Bergmann
2016-07-21 12:52 ` Daniel Lezcano
2016-07-21 12:54 ` Arnd Bergmann
2016-07-10 7:27 ` [PATCH v2 04/10] clk: add Clock driver for nuc970 Wan Zongshun
2016-07-11 22:14 ` Michael Turquette
2016-07-10 7:27 ` [PATCH v2 05/10] power/reset: Add reset driver support for nuc900 Wan Zongshun
2016-07-10 21:56 ` Paul Gortmaker
2016-07-11 2:30 ` Wan Zongshun
2016-07-11 2:58 ` Paul Gortmaker
2016-07-10 7:27 ` [PATCH v2 06/10] soc: Add SoC specific " Wan Zongshun
2016-07-11 8:03 ` Arnd Bergmann
2016-07-11 9:07 ` Wan Zongshun
2016-07-11 10:24 ` Arnd Bergmann
2016-07-11 10:28 ` Wan ZongShun
2016-07-11 10:36 ` Arnd Bergmann
2016-07-12 9:06 ` Wan Zongshun
2016-07-12 9:50 ` Arnd Bergmann
2016-07-10 7:27 ` [PATCH v2 07/10] ARM: dts: Add clock header file into dt-bindings Wan Zongshun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468135649-19980-1-git-send-email-vw@iommu.org \
--to=vw@iommu.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).