[PATCH 0/2] arm64: marvell: add support for the slave CP in Armada 8K

[PATCH 0/2] arm64: marvell: add support for the slave CP in Armada 8K

[Thomas Petazzoni]

Hello,

The following set of two patches add support for the slave CP HW block
found in the Armada 8K SoCs. As a reminder:

 - Armada 7K is an SoC with one AP and one CP. The AP is the part that
   contains the CPU, cache and a few basic I/Os. The CP is the part
   that contains most interesting I/Os (PCIe, SATA, USB, Ethernet,
   etc.)

 - Armada 8K is an SoC with one AP and two CPs.

This set of patches add support for the second CP found in Armada 8K,
also called the "slave CP110".

Thanks,

Thomas

Thomas Petazzoni (2):
  arm64: dts: marvell: add description for the slave CP110 in Armada 8K
  arm64: dts: marvell: add description for the Armada 8040 dev board

 arch/arm64/boot/dts/marvell/Makefile               |   1 +
 arch/arm64/boot/dts/marvell/armada-8020.dtsi       |   1 +
 .../{armada-8020.dtsi => armada-8040-db.dts}       | 109 ++++++++-
 arch/arm64/boot/dts/marvell/armada-8040.dtsi       |   1 +
 .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 246 +++++++++++++++++++++
 5 files changed, 351 insertions(+), 7 deletions(-)
 copy arch/arm64/boot/dts/marvell/{armada-8020.dtsi => armada-8040-db.dts} (55%)
 create mode 100644 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

-- 
2.7.4

[PATCH 1/2] arm64: dts: marvell: add description for the slave CP110 in Armada 8K

[Thomas Petazzoni]

The Armada 8K platforms (8020 and 8040) have two CP110 HW blocks: one
master, one slave. So far, only the master CP110 was described. This
commit adds the Device Tree description for the slave CP110, and hooks
it up in the DT description of the Armada 8020 and Armada 8040 SoCs.

The slave CP110 description is somewhat similar to the master CP110
description except for a number of things like register offsets,
interrupt numbers, references to clocks, etc.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-8020.dtsi       |   1 +
 arch/arm64/boot/dts/marvell/armada-8040.dtsi       |   1 +
 .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 246 +++++++++++++++++++++
 3 files changed, 248 insertions(+)
 create mode 100644 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
index 3753c1c..048e5cf 100644
--- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -47,6 +47,7 @@
 
 #include "armada-ap806-dual.dtsi"
 #include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
 
 / {
 	model = "Marvell Armada 8020";
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 8bd0d8f..9c1b28c 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -47,6 +47,7 @@
 
 #include "armada-ap806-quad.dtsi"
 #include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
 
 / {
 	model = "Marvell Armada 8040";
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
new file mode 100644
index 0000000..6ff1201
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -0,0 +1,246 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada CP110 Slave.
+ */
+
+/ {
+	cp110-slave {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges = <0x0 0x0 0xf4000000 0x2000000>;
+
+			cps_syscon0: system-controller at 440000 {
+				compatible = "marvell,cp110-system-controller0",
+					     "syscon";
+				reg = <0x440000 0x1000>;
+				#clock-cells = <2>;
+				core-clock-output-names =
+					"cps-apll", "cps-ppv2-core", "cps-eip",
+					"cps-core", "cps-nand-core";
+				gate-clock-output-names =
+					"cps-audio", "cps-communit", "cps-nand",
+					"cps-ppv2", "cps-sdio", "cps-mg-domain",
+					"cps-mg-core", "cps-xor1", "cps-xor0",
+					"cps-gop-dp", "none", "cps-pcie_x10",
+					"cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor",
+					"cps-sata", "cps-sata-usb", "cps-main",
+					"cps-sd-mmc", "none", "none",
+					"cps-slow-io", "cps-usb3h0", "cps-usb3h1",
+					"cps-usb3dev", "cps-eip150", "cps-eip197";
+			};
+
+			cps_sata0: sata at 540000 {
+				compatible = "marvell,armada-8k-ahci";
+				reg = <0x540000 0x30000>;
+				interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 15>;
+				status = "disabled";
+			};
+
+			cps_usb3_0: usb3 at 500000 {
+				compatible = "marvell,armada-8k-xhci",
+					     "generic-xhci";
+				reg = <0x500000 0x4000>;
+				dma-coherent;
+				interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 22>;
+				status = "disabled";
+			};
+
+			cps_usb3_1: usb3 at 510000 {
+				compatible = "marvell,armada-8k-xhci",
+					     "generic-xhci";
+				reg = <0x510000 0x4000>;
+				dma-coherent;
+				interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 23>;
+				status = "disabled";
+			};
+
+			cps_xor0: xor at 6a0000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x6a0000 0x1000>,
+				      <0x6b0000 0x1000>;
+				dma-coherent;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&cps_syscon0 1 8>;
+			};
+
+			cps_xor1: xor at 6c0000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x6c0000 0x1000>,
+				      <0x6d0000 0x1000>;
+				dma-coherent;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&cps_syscon0 1 7>;
+			};
+
+			cps_spi0: spi at 700600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x700600 0x50>;
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				cell-index = <1>;
+				clocks = <&cps_syscon0 0 3>;
+				status = "disabled";
+			};
+
+			cps_spi1: spi at 700680 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x700680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <2>;
+				clocks = <&cps_syscon0 1 21>;
+				status = "disabled";
+			};
+
+			cps_i2c0: i2c at 701000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x701000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 21>;
+				status = "disabled";
+			};
+
+			cps_i2c1: i2c at 701100 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x701100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 21>;
+				status = "disabled";
+			};
+		};
+
+		cps_pcie0: pcie at f4600000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf4600000 0 0x10000>,
+			      <0 0xfaf00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xfd000000 0  0xfd000000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xfa000000 0  0xfa000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			num-lanes = <1>;
+			clocks = <&cps_syscon0 1 13>;
+			status = "disabled";
+		};
+
+		cps_pcie1: pcie at f4620000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf4620000 0 0x10000>,
+			      <0 0xfbf00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xfd010000 0  0xfd010000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xfb000000 0  0xfb000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+
+			num-lanes = <1>;
+			clocks = <&cps_syscon0 1 11>;
+			status = "disabled";
+		};
+
+		cps_pcie2: pcie at f4640000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf4640000 0 0x10000>,
+			      <0 0xfcf00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xfd020000 0  0xfd020000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xfc000000 0  0xfc000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
+
+			num-lanes = <1>;
+			clocks = <&cps_syscon0 1 12>;
+			status = "disabled";
+		};
+	};
+};
-- 
2.7.4

[PATCH 2/2] arm64: dts: marvell: add description for the Armada 8040 dev board

[Thomas Petazzoni]

This commit adds a Device Tree description for the Marvell Armada 8040
Development Board. It features a quad-core Cortex A72 Armada 8040 SoC,
with a large number of peripherals: dual Gigabit, dual 10 GBit, 6 PCIe
interfaces, 6 SATA ports, 4 USB 3.0 ports, and more.

Only a subset of the functionalities are supported so far, and
additional features will be progressively enabled in the future.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 arch/arm64/boot/dts/marvell/Makefile           |   1 +
 arch/arm64/boot/dts/marvell/armada-8040-db.dts | 150 +++++++++++++++++++++++++
 2 files changed, 151 insertions(+)
 create mode 100644 arch/arm64/boot/dts/marvell/armada-8040-db.dts

diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 308468d..cf39531 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
 # Mvebu SoC Family
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
new file mode 100644
index 0000000..6e6f182
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada 8040 Development board platform
+ */
+
+#include "armada-8040.dtsi"
+
+/ {
+	model = "Marvell Armada 8040 DB board";
+	compatible = "marvell,armada8040-db", "marvell,armada8040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory at 00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition at 0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition at 400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
+			};
+		};
+	};
+};
+
+/* Accessible over the mini-USB CON9 connector on the main board */
+&uart0 {
+	status = "okay";
+};
+
+
+/* CON5 on CP0 expansion */
+&cpm_pcie2 {
+	status = "okay";
+};
+
+&cpm_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+/* CON4 on CP0 expansion */
+&cpm_sata0 {
+	status = "okay";
+};
+
+/* CON9 on CP0 expansion */
+&cpm_usb3_0 {
+	status = "okay";
+};
+
+/* CON10 on CP0 expansion */
+&cpm_usb3_1 {
+	status = "okay";
+};
+
+/* CON5 on CP1 expansion */
+&cps_pcie2 {
+	status = "okay";
+};
+
+&cps_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+/* CON4 on CP1 expansion */
+&cps_sata0 {
+	status = "okay";
+};
+
+/* CON9 on CP1 expansion */
+&cps_usb3_0 {
+	status = "okay";
+};
+
+/* CON10 on CP1 expansion */
+&cps_usb3_1 {
+	status = "okay";
+};
-- 
2.7.4

[PATCH 0/2] arm64: marvell: add support for the slave CP in Armada 8K

[Gregory CLEMENT]

Hi Thomas,
 
 On Thu, Jul 28 2016, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote:

> Hello,
>
> The following set of two patches add support for the slave CP HW block
> found in the Armada 8K SoCs. As a reminder:
>
>  - Armada 7K is an SoC with one AP and one CP. The AP is the part that
>    contains the CPU, cache and a few basic I/Os. The CP is the part
>    that contains most interesting I/Os (PCIe, SATA, USB, Ethernet,
>    etc.)
>
>  - Armada 8K is an SoC with one AP and two CPs.
>
> This set of patches add support for the second CP found in Armada 8K,
> also called the "slave CP110".

Both patches applied on mvebu/dt64

Thanks,

Gregory

>
> Thanks,
>
> Thomas
>
> Thomas Petazzoni (2):
>   arm64: dts: marvell: add description for the slave CP110 in Armada 8K
>   arm64: dts: marvell: add description for the Armada 8040 dev board
>
>  arch/arm64/boot/dts/marvell/Makefile               |   1 +
>  arch/arm64/boot/dts/marvell/armada-8020.dtsi       |   1 +
>  .../{armada-8020.dtsi => armada-8040-db.dts}       | 109 ++++++++-
>  arch/arm64/boot/dts/marvell/armada-8040.dtsi       |   1 +
>  .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 246 +++++++++++++++++++++
>  5 files changed, 351 insertions(+), 7 deletions(-)
>  copy arch/arm64/boot/dts/marvell/{armada-8020.dtsi => armada-8040-db.dts} (55%)
>  create mode 100644 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
>
> -- 
> 2.7.4
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com