linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4] arm64: dts: mt8173: add mmsel clocks for 4K support
@ 2016-07-29  9:09 Bibby Hsieh
  2016-07-29  9:53 ` Philipp Zabel
  0 siblings, 1 reply; 3+ messages in thread
From: Bibby Hsieh @ 2016-07-29  9:09 UTC (permalink / raw)
  To: linux-arm-kernel

To support HDMI 4K resolution, mmsys need clcok
mm_sel to be 400MHz.

The board .dts file should override the clock rate
property with the higher VENCPLL frequency the board
supports HDMI 4K resolution.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 78529e4..93d4d17 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -690,6 +690,8 @@
 			compatible = "mediatek,mt8173-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&topckgen CLK_TOP_MM_SEL>;
+			clock-frequency  = <400000000>;
 			#clock-cells = <1>;
 		};
 
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH v4] arm64: dts: mt8173: add mmsel clocks for 4K support
  2016-07-29  9:09 [PATCH v4] arm64: dts: mt8173: add mmsel clocks for 4K support Bibby Hsieh
@ 2016-07-29  9:53 ` Philipp Zabel
  2016-08-03  1:46   ` Bibby Hsieh
  0 siblings, 1 reply; 3+ messages in thread
From: Philipp Zabel @ 2016-07-29  9:53 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Bibby,

Am Freitag, den 29.07.2016, 17:09 +0800 schrieb Bibby Hsieh:
> To support HDMI 4K resolution, mmsys need clcok
> mm_sel to be 400MHz.
> 
> The board .dts file should override the clock rate
> property with the higher VENCPLL frequency the board
> supports HDMI 4K resolution.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi |    2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index 78529e4..93d4d17 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -690,6 +690,8 @@
>  			compatible = "mediatek,mt8173-mmsys", "syscon";
>  			reg = <0 0x14000000 0 0x1000>;
>  			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> +			clocks = <&topckgen CLK_TOP_MM_SEL>;
> +			clock-frequency  = <400000000>;

This is unchanged compared to v3, I suggest to use assigned-clocks /
assigned-clock-rates properties instead.

best regards
Philipp

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH v4] arm64: dts: mt8173: add mmsel clocks for 4K support
  2016-07-29  9:53 ` Philipp Zabel
@ 2016-08-03  1:46   ` Bibby Hsieh
  0 siblings, 0 replies; 3+ messages in thread
From: Bibby Hsieh @ 2016-08-03  1:46 UTC (permalink / raw)
  To: linux-arm-kernel

Hi, Philipp,

On Fri, 2016-07-29 at 11:53 +0200, Philipp Zabel wrote:
> Hi Bibby,
> 
> Am Freitag, den 29.07.2016, 17:09 +0800 schrieb Bibby Hsieh:
> > To support HDMI 4K resolution, mmsys need clcok
> > mm_sel to be 400MHz.
> > 
> > The board .dts file should override the clock rate
> > property with the higher VENCPLL frequency the board
> > supports HDMI 4K resolution.
> > 
> > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> > ---
> >  arch/arm64/boot/dts/mediatek/mt8173.dtsi |    2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index 78529e4..93d4d17 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > @@ -690,6 +690,8 @@
> >  			compatible = "mediatek,mt8173-mmsys", "syscon";
> >  			reg = <0 0x14000000 0 0x1000>;
> >  			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> > +			clocks = <&topckgen CLK_TOP_MM_SEL>;
> > +			clock-frequency  = <400000000>;
> 
> This is unchanged compared to v3, I suggest to use assigned-clocks /
> assigned-clock-rates properties instead.
> 
Ok, I will change that, thanks for your review.

-- 
Bibby
> best regards
> Philipp
> 

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2016-08-03  1:46 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-07-29  9:09 [PATCH v4] arm64: dts: mt8173: add mmsel clocks for 4K support Bibby Hsieh
2016-07-29  9:53 ` Philipp Zabel
2016-08-03  1:46   ` Bibby Hsieh

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).