* [PATCH v2 0/3] thermal: broadcom: Add NSP Thermal Support
@ 2017-04-27 21:23 Jon Mason
2017-04-27 21:23 ` [PATCH v2 1/3] ARM: BCM: Enable thermal support for iProc SoCs Jon Mason
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Jon Mason @ 2017-04-27 21:23 UTC (permalink / raw)
To: linux-arm-kernel
Changes in v2:
* Split SoC enablement into a separate patch (per Eduardo Valentin)
* Added Eduardo Valentin's Acked-by to the DTS patch
This adds support for NSP to the existing Northstar thermal driver.
This code is based on patches currently in the Linux SoC Thermal git
tree. Specfically,
https://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git/commit/?h=linus&id=a94cb7eeecc4104a6874339f90c5d0647359c102
Jon Mason (3):
ARM: BCM: Enable thermal support for iProc SoCs
thermal: broadcom: ns-thermal: default on iProc SoCs
ARM: dts: NSP: Add Thermal Support
arch/arm/boot/dts/bcm-nsp.dtsi | 26 ++++++++++++++++++++++++++
arch/arm/mach-bcm/Kconfig | 2 ++
drivers/thermal/broadcom/Kconfig | 9 +++++----
3 files changed, 33 insertions(+), 4 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/3] ARM: BCM: Enable thermal support for iProc SoCs
2017-04-27 21:23 [PATCH v2 0/3] thermal: broadcom: Add NSP Thermal Support Jon Mason
@ 2017-04-27 21:23 ` Jon Mason
2017-04-27 23:10 ` Scott Branden
2017-04-27 21:23 ` [PATCH v2 2/3] thermal: broadcom: ns-thermal: default on " Jon Mason
2017-04-27 21:23 ` [PATCH v2 3/3] ARM: dts: NSP: Add Thermal Support Jon Mason
2 siblings, 1 reply; 6+ messages in thread
From: Jon Mason @ 2017-04-27 21:23 UTC (permalink / raw)
To: linux-arm-kernel
Change the iProc Kconfig to select THERMAL and THERMAL_OF, which allows
the ns-thermal driver to be selected via menuconfig.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
arch/arm/mach-bcm/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index a0e66d8..da2bfeb 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -19,6 +19,8 @@ config ARCH_BCM_IPROC
select GPIOLIB
select ARM_AMBA
select PINCTRL
+ select THERMAL
+ select THERMAL_OF
help
This enables support for systems based on Broadcom IPROC architected SoCs.
The IPROC complex contains one or more ARM CPUs along with common
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/3] thermal: broadcom: ns-thermal: default on iProc SoCs
2017-04-27 21:23 [PATCH v2 0/3] thermal: broadcom: Add NSP Thermal Support Jon Mason
2017-04-27 21:23 ` [PATCH v2 1/3] ARM: BCM: Enable thermal support for iProc SoCs Jon Mason
@ 2017-04-27 21:23 ` Jon Mason
2017-04-27 21:23 ` [PATCH v2 3/3] ARM: dts: NSP: Add Thermal Support Jon Mason
2 siblings, 0 replies; 6+ messages in thread
From: Jon Mason @ 2017-04-27 21:23 UTC (permalink / raw)
To: linux-arm-kernel
Tweak the Kconfig description to mention support for NSP and make the
default on for iProc based platforms.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
drivers/thermal/broadcom/Kconfig | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
index f0dea8a..26d706c 100644
--- a/drivers/thermal/broadcom/Kconfig
+++ b/drivers/thermal/broadcom/Kconfig
@@ -1,8 +1,9 @@
config BCM_NS_THERMAL
tristate "Northstar thermal driver"
depends on ARCH_BCM_IPROC || COMPILE_TEST
+ default ARCH_BCM_IPROC
help
- Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081,
- BCM4709 and BCM47094. It contains DMU (Device Management Unit) block
- with a thermal sensor that allows checking CPU temperature. This
- driver provides support for it.
+ Support for the Northstar and Northstar Plus family of SoCs (e.g.
+ BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device
+ Management Unit) block with a thermal sensor that allows checking CPU
+ temperature.
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 3/3] ARM: dts: NSP: Add Thermal Support
2017-04-27 21:23 [PATCH v2 0/3] thermal: broadcom: Add NSP Thermal Support Jon Mason
2017-04-27 21:23 ` [PATCH v2 1/3] ARM: BCM: Enable thermal support for iProc SoCs Jon Mason
2017-04-27 21:23 ` [PATCH v2 2/3] thermal: broadcom: ns-thermal: default on " Jon Mason
@ 2017-04-27 21:23 ` Jon Mason
2 siblings, 0 replies; 6+ messages in thread
From: Jon Mason @ 2017-04-27 21:23 UTC (permalink / raw)
To: linux-arm-kernel
Add thermal support via the ns-thermal driver and create a single
thermal zone for the entire SoC.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 832795b..be6fcfb 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -383,6 +383,12 @@
<0x3f408 0x04>;
};
+ thermal: thermal at 3f2c0 {
+ compatible = "brcm,ns-thermal";
+ reg = <0x3f2c0 0x10>;
+ #thermal-sensor-cells = <0>;
+ };
+
sata_phy: sata_phy at 40100 {
compatible = "brcm,iproc-nsp-sata-phy";
reg = <0x40100 0x340>;
@@ -533,4 +539,24 @@
brcm,pcie-msi-inten;
};
};
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ coefficients = <(-556) 418000>;
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
};
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 1/3] ARM: BCM: Enable thermal support for iProc SoCs
2017-04-27 21:23 ` [PATCH v2 1/3] ARM: BCM: Enable thermal support for iProc SoCs Jon Mason
@ 2017-04-27 23:10 ` Scott Branden
2017-04-28 18:05 ` Jon Mason
0 siblings, 1 reply; 6+ messages in thread
From: Scott Branden @ 2017-04-27 23:10 UTC (permalink / raw)
To: linux-arm-kernel
On 17-04-27 02:23 PM, Jon Mason wrote:
> Change the iProc Kconfig to select THERMAL and THERMAL_OF, which allows
> the ns-thermal driver to be selected via menuconfig.
>
> Signed-off-by: Jon Mason <jon.mason@broadcom.com>
> ---
> arch/arm/mach-bcm/Kconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index a0e66d8..da2bfeb 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -19,6 +19,8 @@ config ARCH_BCM_IPROC
> select GPIOLIB
> select ARM_AMBA
> select PINCTRL
> + select THERMAL
> + select THERMAL_OF
This is NSP specific at this point. Also, If it increases code size in
any way it shouldn't be selected for all IPROC SoCS. I'd rather this
was just selected via defconfig
> help
> This enables support for systems based on Broadcom IPROC architected SoCs.
> The IPROC complex contains one or more ARM CPUs along with common
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/3] ARM: BCM: Enable thermal support for iProc SoCs
2017-04-27 23:10 ` Scott Branden
@ 2017-04-28 18:05 ` Jon Mason
0 siblings, 0 replies; 6+ messages in thread
From: Jon Mason @ 2017-04-28 18:05 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Apr 27, 2017 at 7:10 PM, Scott Branden
<scott.branden@broadcom.com> wrote:
>
>
> On 17-04-27 02:23 PM, Jon Mason wrote:
>>
>> Change the iProc Kconfig to select THERMAL and THERMAL_OF, which allows
>> the ns-thermal driver to be selected via menuconfig.
>>
>> Signed-off-by: Jon Mason <jon.mason@broadcom.com>
>> ---
>> arch/arm/mach-bcm/Kconfig | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
>> index a0e66d8..da2bfeb 100644
>> --- a/arch/arm/mach-bcm/Kconfig
>> +++ b/arch/arm/mach-bcm/Kconfig
>> @@ -19,6 +19,8 @@ config ARCH_BCM_IPROC
>> select GPIOLIB
>> select ARM_AMBA
>> select PINCTRL
>> + select THERMAL
>> + select THERMAL_OF
>
> This is NSP specific at this point. Also, If it increases code size in any
> way it shouldn't be selected for all IPROC SoCS. I'd rather this was just
> selected via defconfig
This isn't selectable via menuconfig without being in the kconfig.
I'll move it to the NSP portion of the kconfig, as to not increase the
size of other's kernels.
Thanks,
Jon
>
>> help
>> This enables support for systems based on Broadcom IPROC
>> architected SoCs.
>> The IPROC complex contains one or more ARM CPUs along with
>> common
>>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-04-28 18:05 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-27 21:23 [PATCH v2 0/3] thermal: broadcom: Add NSP Thermal Support Jon Mason
2017-04-27 21:23 ` [PATCH v2 1/3] ARM: BCM: Enable thermal support for iProc SoCs Jon Mason
2017-04-27 23:10 ` Scott Branden
2017-04-28 18:05 ` Jon Mason
2017-04-27 21:23 ` [PATCH v2 2/3] thermal: broadcom: ns-thermal: default on " Jon Mason
2017-04-27 21:23 ` [PATCH v2 3/3] ARM: dts: NSP: Add Thermal Support Jon Mason
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).