linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Stu Hsieh <stu.hsieh@mediatek.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh+dt@kernel.org>, CK Hu <ck.hu@mediatek.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, srv_heupstream@mediatek.com,
	linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
	Stu Hsieh <stu.hsieh@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-media@vger.kernel.org
Subject: [PATCH v3 09/13] [media] mtk-mipicsi: add ISR for writing the data to buffer
Date: Tue, 14 May 2019 14:13:46 +0800	[thread overview]
Message-ID: <1557814430-9675-10-git-send-email-stu.hsieh@mediatek.com> (raw)
In-Reply-To: <1557814430-9675-1-git-send-email-stu.hsieh@mediatek.com>

This patch add ISR for writing the data to buffer

When mipicsi HW complete to write the data in buffer,
the interrupt woulb be trigger.
So, the ISR need to clear interrupt status for next interrupt.

Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
---
 .../media/platform/mtk-mipicsi/mtk_mipicsi.c  | 110 ++++++++++++++++++
 1 file changed, 110 insertions(+)

diff --git a/drivers/media/platform/mtk-mipicsi/mtk_mipicsi.c b/drivers/media/platform/mtk-mipicsi/mtk_mipicsi.c
index 44c01c8d566b..af5655345754 100644
--- a/drivers/media/platform/mtk-mipicsi/mtk_mipicsi.c
+++ b/drivers/media/platform/mtk-mipicsi/mtk_mipicsi.c
@@ -36,6 +36,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/iommu.h>
 #include <linux/of.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-dev.h>
@@ -93,6 +94,8 @@
 #define CAMSV_MODULE_EN					0x10
 #define CAMSV_FMT_SEL					0x14
 #define CAMSV_INT_EN					0x18
+#define CAMSV_INT_STATUS				0x1C
+#define PASS1_DONE_STATUS				10
 #define CAMSV_SW_CTL					0x20
 #define CAMSV_CLK_EN					0x30
 
@@ -122,6 +125,8 @@ struct mtk_mipicsi_dev {
 	struct platform_device *pdev;
 	unsigned int camsv_num;
 	struct device *larb_pdev;
+	unsigned int		irq[MTK_CAMDMA_MAX_NUM];
+	bool irq_status[MTK_CAMDMA_MAX_NUM];
 	void __iomem		*ana;
 	void __iomem		*seninf_ctrl;
 	void __iomem		*seninf;
@@ -132,6 +137,7 @@ struct mtk_mipicsi_dev {
 	spinlock_t		lock;
 	spinlock_t		queue_lock;
 	struct mtk_mipicsi_buf	cam_buf[MAX_BUFFER_NUM];
+	bool			is_enable_irq[MTK_CAMDMA_MAX_NUM];
 	bool streamon;
 	unsigned int link;
 	u8 link_reg_val;
@@ -911,9 +917,96 @@ static const struct dev_pm_ops mtk_mipicsi_pm = {
 		mtk_mipicsi_pm_resume, NULL)
 };
 
+static int get_irq_channel(struct mtk_mipicsi_dev *mipicsi)
+{
+	int ch;
+	u32 int_reg_val;
+
+	for (ch = 0; ch < mipicsi->camsv_num; ++ch) {
+		int_reg_val = readl(mipicsi->camsv[ch] + CAMSV_INT_STATUS);
+		if ((int_reg_val & (1UL << PASS1_DONE_STATUS)) != 0UL)
+			return ch;
+	}
+
+	return -1;
+}
+
+static void mtk_mipicsi_irq_buf_process(struct mtk_mipicsi_dev *mipicsi)
+{
+	unsigned int i = 0U;
+	struct mtk_mipicsi_buf *new_cam_buf = NULL;
+	struct mtk_mipicsi_buf *tmp = NULL;
+	unsigned int index = 0U;
+	unsigned int next = 0U;
+
+	for (i = 0U; i < MTK_CAMDMA_MAX_NUM; ++i)
+		mipicsi->irq_status[i] = false;
+
+	i = 0;
+
+	/* only one buffer left */
+	if ((&(mipicsi->fb_list))->next->next == &(mipicsi->fb_list))
+		return;
+
+	/*for each fb_lst 2 times to get the top 2 buffer.*/
+	list_for_each_entry_safe(new_cam_buf, tmp,
+		&(mipicsi->fb_list), queue) {
+		if (i == 0U) {
+			index = new_cam_buf->vb->index;
+		} else {
+			next = new_cam_buf->vb->index;
+			break;
+		}
+		++i;
+	}
+
+	/*
+	 * fb_list has one more buffer. Free the first buffer to user
+	 * and fill the second buffer to HW.
+	 */
+	vb2_buffer_done(mipicsi->cam_buf[index].vb,
+		VB2_BUF_STATE_DONE);
+
+	list_del_init(&(mipicsi->cam_buf[index].queue));
+}
+
+static irqreturn_t mtk_mipicsi_isr(int irq, void *data)
+{
+
+	struct mtk_mipicsi_dev *mipicsi = data;
+	unsigned long flags = 0;
+	int isr_ch;
+	u8 irq_cnt = 0, i = 0;
+
+	spin_lock_irqsave(&mipicsi->lock, flags);
+
+	isr_ch = get_irq_channel(mipicsi);
+	if (isr_ch < 0) {
+		spin_unlock_irqrestore(&mipicsi->lock, flags);
+		return IRQ_HANDLED;
+	}
+
+	/* clear interrupt */
+	writel(1UL << PASS1_DONE_STATUS,
+		mipicsi->camsv[isr_ch] + CAMSV_INT_STATUS);
+	mipicsi->irq_status[isr_ch] = true;
+	for (i = 0U; i < MTK_CAMDMA_MAX_NUM; ++i) {
+		if (mipicsi->irq_status[i])
+			++irq_cnt;
+	}
+
+	if (irq_cnt == mipicsi->link)
+		mtk_mipicsi_irq_buf_process(mipicsi);
+	spin_unlock_irqrestore(&mipicsi->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
 static int seninf_mux_camsv_node_parse(struct mtk_mipicsi_dev *mipicsi,
 		int index)
 {
+	int ret;
+	int irq;
 	struct clk *clk = NULL;
 	struct device *dev = NULL;
 	struct resource *res = NULL;
@@ -951,6 +1044,23 @@ static int seninf_mux_camsv_node_parse(struct mtk_mipicsi_dev *mipicsi,
 	}
 	mipicsi->clk[index] = clk;
 
+	irq = of_irq_get(np, 0);
+	if (irq <= 0) {
+		dev_err(dev, "get irq fail in %s node\n", np->full_name);
+		return -ENODEV;
+	}
+	mipicsi->irq[index] = irq;
+
+	ret = devm_request_irq(dev, irq,
+			mtk_mipicsi_isr, 0,
+			mipicsi->drv_name, mipicsi);
+	if (ret != 0) {
+		dev_err(dev, "%s irq register failed\n", np->full_name);
+		return -ENODEV;
+	}
+	disable_irq(mipicsi->irq[index]);
+	mipicsi->irq_status[index] = false;
+
 	res = platform_get_resource(camdma_pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		dev_err(dev, "get seninf_mux memory failed in %s node\n",
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-05-14  6:15 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-14  6:13 [PATCH v3 00/13] Add mediatek mipicsi driver for Mediatek SOC MT2712 Stu Hsieh
2019-05-14  6:13 ` [PATCH v3 01/13] dt-bindings: media: Add binding for MT2712 MIPI-CSI2 Stu Hsieh
2019-05-14 19:28   ` Rob Herring
2019-05-14  6:13 ` [PATCH v3 02/13] [media] mtk-mipicsi: add mediatek mipicsi driver for mt2712 Stu Hsieh
2019-05-17  7:37   ` CK Hu
2019-05-14  6:13 ` [PATCH v3 03/13] [media] mtk-mipicsi: register the soc_camera host Stu Hsieh
2019-05-14  6:13 ` [PATCH v3 04/13] [media] mtk-mipicsi: add the check for non-supported color format Stu Hsieh
2019-05-14  6:13 ` [PATCH v3 05/13] [media] mtk-mipicsi: get the w/h/bytepwerline for mtk_mipicsi Stu Hsieh
2019-05-14  6:13 ` [PATCH v3 06/13] [media] mtk-mipicsi: add function to support SerDes for link number Stu Hsieh
2019-05-14  6:13 ` [PATCH v3 07/13] [media] mtk-mipicsi: enable/disable ana clk Stu Hsieh
2019-05-14  6:13 ` [PATCH v3 08/13] [media] mtk-mipicsi: enable/disable cmos for mt2712 Stu Hsieh
2019-05-14  6:13 ` Stu Hsieh [this message]
2019-05-17  9:05   ` [PATCH v3 09/13] [media] mtk-mipicsi: add ISR for writing the data to buffer CK Hu
2019-05-14  6:13 ` [PATCH v3 10/13] [media] mtk-mipicsi: set the output address in HW reg Stu Hsieh
2019-05-14  6:13 ` [PATCH v3 11/13] [media] mtk-mipicsi: add function to get the format Stu Hsieh
2019-05-14  6:13 ` [PATCH v3 12/13] [media] mtk-mipicsi: add debug message for mipicsi driver Stu Hsieh
2019-05-14  6:13 ` [PATCH v3 13/13] [media] mtk-mipicsi: add debugfs " Stu Hsieh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557814430-9675-10-git-send-email-stu.hsieh@mediatek.com \
    --to=stu.hsieh@mediatek.com \
    --cc=ck.hu@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=srv_heupstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).