Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Robert Chiras <robert.chiras@nxp.com>
To: "Guido Günther" <agx@sigxcpu.org>, "Marek Vasut" <marex@denx.de>,
	"Stefan Agner" <stefan@agner.ch>,
	"David Airlie" <airlied@linux.ie>,
	"Daniel Vetter" <daniel@ffwll.ch>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 14/15] drm/mxsfb: Add support for horizontal stride
Date: Wed, 14 Aug 2019 13:48:50 +0300
Message-ID: <1565779731-1300-15-git-send-email-robert.chiras@nxp.com> (raw)
In-Reply-To: <1565779731-1300-1-git-send-email-robert.chiras@nxp.com>

Besides the eLCDIF block, there is another IP block, used in the past
for EPDC panels. Since the iMX.8mq doesn't have an EPDC connector, this
block is not documented, but we can use it to do additional operations
on the frame buffer.
In this case, we can use the pigeon registers from this IP block in
order to do horizontal crop on the frame buffer processed by the eLCDIF
block.

Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
---
 drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 79 ++++++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/mxsfb/mxsfb_drv.c  | 26 ++++++++++++-
 drivers/gpu/drm/mxsfb/mxsfb_regs.h | 16 ++++++++
 3 files changed, 115 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
index a12f53d..317575e 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
@@ -15,6 +15,7 @@
 
 #include <video/videomode.h>
 
+#include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_fb_cma_helper.h>
@@ -435,13 +436,66 @@ void mxsfb_crtc_disable(struct mxsfb_drm_private *mxsfb)
 	clk_disable_unprepare(mxsfb->clk_axi);
 }
 
+void mxsfb_set_fb_hcrop(struct mxsfb_drm_private *mxsfb, u32 src_w, u32 fb_w)
+{
+	u32 mask_cnt, htotal, hcount;
+	u32 vdctrl2, vdctrl3, vdctrl4, transfer_count;
+	u32 pigeon_12_0, pigeon_12_1, pigeon_12_2;
+
+	if (src_w == fb_w) {
+		writel(0x0, mxsfb->base + HW_EPDC_PIGEON_12_0);
+		writel(0x0, mxsfb->base + HW_EPDC_PIGEON_12_1);
+
+		return;
+	}
+
+	transfer_count = readl(mxsfb->base + LCDC_V4_TRANSFER_COUNT);
+	hcount = TRANSFER_COUNT_GET_HCOUNT(transfer_count);
+
+	transfer_count &= ~TRANSFER_COUNT_SET_HCOUNT(0xffff);
+	transfer_count |= TRANSFER_COUNT_SET_HCOUNT(fb_w);
+	writel(transfer_count, mxsfb->base + LCDC_V4_TRANSFER_COUNT);
+
+	vdctrl2 = readl(mxsfb->base + LCDC_VDCTRL2);
+	htotal  = VDCTRL2_GET_HSYNC_PERIOD(vdctrl2);
+	htotal  += fb_w - hcount;
+	vdctrl2 &= ~VDCTRL2_SET_HSYNC_PERIOD(0x3ffff);
+	vdctrl2 |= VDCTRL2_SET_HSYNC_PERIOD(htotal);
+	writel(vdctrl2, mxsfb->base + LCDC_VDCTRL2);
+
+	vdctrl4 = readl(mxsfb->base + LCDC_VDCTRL4);
+	vdctrl4 &= ~SET_DOTCLK_H_VALID_DATA_CNT(0x3ffff);
+	vdctrl4 |= SET_DOTCLK_H_VALID_DATA_CNT(fb_w);
+	writel(vdctrl4, mxsfb->base + LCDC_VDCTRL4);
+
+	/* configure related pigeon registers */
+	vdctrl3  = readl(mxsfb->base + LCDC_VDCTRL3);
+	mask_cnt = GET_HOR_WAIT_CNT(vdctrl3) - 5;
+
+	pigeon_12_0 = PIGEON_12_0_SET_STATE_MASK(0x24)		|
+		      PIGEON_12_0_SET_MASK_CNT(mask_cnt)	|
+		      PIGEON_12_0_SET_MASK_CNT_SEL(0x6)		|
+		      PIGEON_12_0_POL_ACTIVE_LOW		|
+		      PIGEON_12_0_EN;
+	writel(pigeon_12_0, mxsfb->base + HW_EPDC_PIGEON_12_0);
+
+	pigeon_12_1 = PIGEON_12_1_SET_CLR_CNT(src_w) |
+		      PIGEON_12_1_SET_SET_CNT(0x0);
+	writel(pigeon_12_1, mxsfb->base + HW_EPDC_PIGEON_12_1);
+
+	pigeon_12_2 = 0x0;
+	writel(pigeon_12_2, mxsfb->base + HW_EPDC_PIGEON_12_2);
+}
+
 void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
 			       struct drm_plane_state *state)
 {
 	struct drm_simple_display_pipe *pipe = &mxsfb->pipe;
 	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_plane_state *new_state = pipe->plane.state;
+	struct drm_framebuffer *fb = pipe->plane.state->fb;
 	struct drm_pending_vblank_event *event;
-	dma_addr_t paddr;
+	u32 fb_addr, src_off, src_w, stride, cpp = 0;
 
 	spin_lock_irq(&crtc->dev->event_lock);
 	event = crtc->state->event;
@@ -456,10 +510,27 @@ void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
 	}
 	spin_unlock_irq(&crtc->dev->event_lock);
 
-	paddr = mxsfb_get_fb_paddr(mxsfb);
-	if (paddr) {
+	if (!fb)
+		return;
+
+	fb_addr = mxsfb_get_fb_paddr(mxsfb);
+	if (mxsfb->devdata->ipversion >= 4) {
+		cpp = fb->format->cpp[0];
+		src_off = (new_state->src_y >> 16) * fb->pitches[0] +
+			  (new_state->src_x >> 16) * cpp;
+		fb_addr += fb->offsets[0] + src_off;
+	}
+
+	if (fb_addr) {
 		clk_prepare_enable(mxsfb->clk_axi);
-		writel(paddr, mxsfb->base + mxsfb->devdata->next_buf);
+		writel(fb_addr, mxsfb->base + mxsfb->devdata->next_buf);
 		clk_disable_unprepare(mxsfb->clk_axi);
 	}
+
+	if (mxsfb->devdata->ipversion >= 4 &&
+	    unlikely(drm_atomic_crtc_needs_modeset(new_state->crtc->state))) {
+		stride = DIV_ROUND_UP(fb->pitches[0], cpp);
+		src_w = new_state->src_w >> 16;
+		mxsfb_set_fb_hcrop(mxsfb, src_w, stride);
+	}
 }
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
index 694b287..cc9c14f 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
@@ -136,6 +136,7 @@ static int mxsfb_atomic_helper_check(struct drm_device *dev,
 		if (old_bpp != new_bpp)
 			new_state->mode_changed = true;
 	}
+
 	return ret;
 }
 
@@ -149,6 +150,25 @@ static const struct drm_mode_config_helper_funcs mxsfb_mode_config_helpers = {
 	.atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
 };
 
+static int mxsfb_pipe_check(struct drm_simple_display_pipe *pipe,
+			    struct drm_plane_state *plane_state,
+			    struct drm_crtc_state *crtc_state)
+{
+	struct drm_framebuffer *fb = plane_state->fb;
+	struct drm_framebuffer *old_fb = pipe->plane.state->fb;
+
+	/* force 'mode_changed' when fb pitches changed, since
+	 * the pitch related registers configuration of LCDIF
+	 * can not be done when LCDIF is running.
+	 */
+	if (old_fb && likely(!crtc_state->mode_changed)) {
+		if (old_fb->pitches[0] != fb->pitches[0])
+			crtc_state->mode_changed = true;
+	}
+
+	return 0;
+}
+
 static void mxsfb_pipe_enable(struct drm_simple_display_pipe *pipe,
 			      struct drm_crtc_state *crtc_state,
 			      struct drm_plane_state *plane_state)
@@ -245,6 +265,7 @@ static void mxsfb_pipe_disable_vblank(struct drm_simple_display_pipe *pipe)
 }
 
 static struct drm_simple_display_pipe_funcs mxsfb_funcs = {
+	.check          = mxsfb_pipe_check,
 	.enable		= mxsfb_pipe_enable,
 	.disable	= mxsfb_pipe_disable,
 	.update		= mxsfb_pipe_update,
@@ -348,8 +369,9 @@ static int mxsfb_load(struct drm_device *drm, unsigned long flags)
 
 	drm->mode_config.min_width	= MXSFB_MIN_XRES;
 	drm->mode_config.min_height	= MXSFB_MIN_YRES;
-	drm->mode_config.max_width	= max_res[0];
-	drm->mode_config.max_height	= max_res[1];
+	/* Add additional 16 pixels for possible strides */
+	drm->mode_config.max_width	= max_res[0] + 16;
+	drm->mode_config.max_height	= max_res[1] + 16;
 	drm->mode_config.funcs		= &mxsfb_mode_config_funcs;
 	drm->mode_config.helper_private	= &mxsfb_mode_config_helpers;
 
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_regs.h b/drivers/gpu/drm/mxsfb/mxsfb_regs.h
index 0f63ba1..df3279b 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_regs.h
+++ b/drivers/gpu/drm/mxsfb/mxsfb_regs.h
@@ -145,6 +145,22 @@
 #define DEBUG0_HSYNC			BIT(26)
 #define DEBUG0_VSYNC			BIT(25)
 
+/* pigeon registers for crop */
+#define HW_EPDC_PIGEON_12_0		0xb00
+#define HW_EPDC_PIGEON_12_1		0xb10
+#define HW_EPDC_PIGEON_12_2		0xb20
+
+#define PIGEON_12_0_SET_STATE_MASK(x)	REG_PUT((x), 31, 24)
+#define PIGEON_12_0_SET_MASK_CNT(x)	REG_PUT((x), 23, 12)
+#define PIGEON_12_0_SET_MASK_CNT_SEL(x)	REG_PUT((x), 11,  8)
+#define PIGEON_12_0_SET_OFFSET(x)	REG_PUT((x),  7,  4)
+#define PIGEON_12_0_SET_INC_SEL(x)	REG_PUT((x),  3,  2)
+#define PIGEON_12_0_POL_ACTIVE_LOW	BIT(1)
+#define PIGEON_12_0_EN			BIT(0)
+
+#define PIGEON_12_1_SET_CLR_CNT(x)	REG_PUT((x), 31, 16)
+#define PIGEON_12_1_SET_SET_CNT(x)	REG_PUT((x), 15,  0)
+
 #define MXSFB_MIN_XRES			120
 #define MXSFB_MIN_YRES			120
 #define MXSFB_MAX_XRES			0xffff
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-14 10:48 [PATCH v2 00/15] Improvements and fixes for mxsfb DRM driver Robert Chiras
2019-08-14 10:48 ` [PATCH v2 01/15] drm/mxsfb: Update mxsfb to support a bridge Robert Chiras
2019-08-14 10:48 ` [PATCH v2 02/15] drm/mxsfb: Read bus flags from bridge if present Robert Chiras
2019-08-14 10:48 ` [PATCH v2 03/15] drm/mxsfb: Add defines for the rest of registers Robert Chiras
2019-08-14 10:48 ` [PATCH v2 04/15] drm/mxsfb: Reset vital register for a proper initialization Robert Chiras
2019-08-14 11:11   ` Stefan Agner
2019-08-14 11:38     ` [EXT] " Robert Chiras
2019-08-14 10:48 ` [PATCH v2 05/15] drm/mxsfb: Update register definitions using bit manipulation defines Robert Chiras
2019-08-14 10:48 ` [PATCH v2 06/15] drm/mxsfb: Update mxsfb with additional pixel formats Robert Chiras
2019-08-14 11:44   ` Daniel Stone
2019-08-14 14:58     ` [EXT] " Robert Chiras
2019-08-14 10:48 ` [PATCH v2 07/15] drm/mxsfb: Fix the vblank events Robert Chiras
2019-08-14 17:31   ` Daniel Vetter
2019-08-14 10:48 ` [PATCH v2 08/15] drm/mxsfb: Signal mode changed when bpp changed Robert Chiras
2019-08-14 10:48 ` [PATCH v2 09/15] dt-bindings: display: Add max-res property for mxsfb Robert Chiras
2019-08-14 11:03   ` Stefan Agner
2019-08-14 11:14     ` [EXT] " Robert Chiras
2019-08-14 11:25       ` Stefan Agner
2019-08-14 12:03         ` Robert Chiras
2019-08-14 10:48 ` [PATCH v2 10/15] drm/mxsfb: Add max-res property for MXSFB Robert Chiras
2019-08-14 10:48 ` [PATCH v2 11/15] drm/mxsfb: Update mxsfb to support LCD reset Robert Chiras
2019-08-14 10:48 ` [PATCH v2 12/15] drm/mxsfb: Improve the axi clock usage Robert Chiras
2019-08-14 11:06   ` Stefan Agner
2019-08-14 11:35     ` [EXT] " Robert Chiras
2019-08-14 10:48 ` [PATCH v2 13/15] drm/mxsfb: Clear OUTSTANDING_REQS bits Robert Chiras
2019-08-14 10:48 ` Robert Chiras [this message]
2019-08-14 10:48 ` [PATCH v2 15/15] drm/mxsfb: Add support for live pixel format change Robert Chiras

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1565779731-1300-15-git-send-email-robert.chiras@nxp.com \
    --to=robert.chiras@nxp.com \
    --cc=agx@sigxcpu.org \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=stefan@agner.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox