[PATCH v2 0/7] add support USB for MT8183

[PATCH v2 0/7] add support USB for MT8183

[Chunfeng Yun]

This series support USB DRD controller and enable it's remote
wakeup functoin for MT8183, they depend on the following
series patches:

1. this series add support MT6358 PMIC
  [v5,01/10] mfd: mt6397: clean up code
  https://patchwork.kernel.org/patch/11110487/

2. this series add support pericfg syscon
  [1/2] dt-bindings: clock: mediatek: add pericfg for MT8183
  https://patchwork.kernel.org/patch/11117799/

3. add property mediatek,discth for tphy
  [06/11] phy: phy-mtk-tphy: add a property for disconnect threshold
  https://patchwork.kernel.org/patch/11110695/

v2 changes:
  add patch [7/7]

Chunfeng Yun (7):
  dt-bindings: usb: mtu3: support USB wakeup for MT8183
  dt-bindings: usb: mtk-xhci: support USB wakeup for MT8183
  usb: mtu3: support ip-sleep wakeup for MT8183
  usb: mtk-xhci: support ip-sleep wakeup for MT8183
  arm64: dts: mt8183: add usb and phy nodes
  arm64: dts: mt8183: enable USB remote wakeup
  arm64: dts: mt8183: tune disconnect threshold of u2phy

 .../bindings/usb/mediatek,mtk-xhci.txt        |  1 +
 .../devicetree/bindings/usb/mediatek,mtu3.txt |  1 +
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts   | 23 +++++++
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 64 +++++++++++++++++++
 drivers/usb/host/xhci-mtk.c                   | 14 +++-
 drivers/usb/mtu3/mtu3_host.c                  | 14 +++-
 6 files changed, 115 insertions(+), 2 deletions(-)

-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/7] dt-bindings: usb: mtu3: support USB wakeup for MT8183

[Chunfeng Yun]

Support USB wakeup by ip-sleep mode for MT8183

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: no changes
---
 Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index 3382b5cb471d..ed954bedcd2f 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -48,6 +48,7 @@ Optional properties:
 	"wakeup-source", and has two arguments:
 	- the first one : register base address of the glue layer in syscon;
 	- the second one : hardware version of the glue layer
+		- 0 : used by mt8183 etc
 		- 1 : used by mt8173 etc
 		- 2 : used by mt2712 etc
  - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/7] dt-bindings: usb: mtk-xhci: support USB wakeup for MT8183

[Chunfeng Yun]

Support USB wakeup by ip-sleep mode for MT8183

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: no changes
---
 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
index 266c2d917a28..9a0a9eb0456f 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
@@ -41,6 +41,7 @@ Optional properties:
 	"wakeup-source", and has two arguments:
 	- the first one : register base address of the glue layer in syscon;
 	- the second one : hardware version of the glue layer
+		- 0 : used by mt8183 etc
 		- 1 : used by mt8173 etc
 		- 2 : used by mt2712 etc
  - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/7] usb: mtu3: support ip-sleep wakeup for MT8183

[Chunfeng Yun]

Support USB wakeup by ip-sleep mode for MT8183, it's similar to
MT8173

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: no changes
---
 drivers/usb/mtu3/mtu3_host.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
index c871b94f3e6f..001b17aeb1eb 100644
--- a/drivers/usb/mtu3/mtu3_host.c
+++ b/drivers/usb/mtu3/mtu3_host.c
@@ -18,6 +18,12 @@
 #include "mtu3.h"
 #include "mtu3_dr.h"
 
+/* mt8183 etc */
+#define PERI_WK_CTRL0	0x20
+#define WC0_IS_C(x)	(((x) & 0xf) << 28)  /* cycle debounce */
+#define WC0_IS_EN	BIT(12)
+#define WC0_IS_P	BIT(6)  /* polarity for ip sleep */
+
 /* mt8173 etc */
 #define PERI_WK_CTRL1	0x4
 #define WC1_IS_C(x)	(((x) & 0xf) << 26)  /* cycle debounce */
@@ -30,7 +36,8 @@
 #define SSC_SPM_INT_EN		BIT(1)
 
 enum ssusb_uwk_vers {
-	SSUSB_UWK_V1 = 1,
+	SSUSB_UWK_V0 = 0,
+	SSUSB_UWK_V1,
 	SSUSB_UWK_V2,
 };
 
@@ -43,6 +50,11 @@ static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
 	u32 reg, msk, val;
 
 	switch (ssusb->uwk_vers) {
+	case SSUSB_UWK_V0:
+		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0;
+		msk = WC0_IS_EN | WC0_IS_C(0xf) | WC0_IS_P;
+		val = enable ? (WC0_IS_EN | WC0_IS_C(0x8)) : 0;
+		break;
 	case SSUSB_UWK_V1:
 		reg = ssusb->uwk_reg_base + PERI_WK_CTRL1;
 		msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 4/7] usb: mtk-xhci: support ip-sleep wakeup for MT8183

[Chunfeng Yun]

Support USB wakeup by ip-sleep mode for MT8183, it's similar to
MT8173

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: no changes
---
 drivers/usb/host/xhci-mtk.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 026fe18972d3..4b59f2978954 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -57,6 +57,12 @@
 #define CTRL_U2_FORCE_PLL_STB	BIT(28)
 
 /* usb remote wakeup registers in syscon */
+/* mt8183 etc */
+#define PERI_WK_CTRL0	0x20
+#define WC0_IS_C(x)	(((x) & 0xf) << 28)  /* cycle debounce */
+#define WC0_IS_EN	BIT(12)
+#define WC0_IS_P	BIT(6)  /* polarity for ip sleep */
+
 /* mt8173 etc */
 #define PERI_WK_CTRL1	0x4
 #define WC1_IS_C(x)	(((x) & 0xf) << 26)  /* cycle debounce */
@@ -69,7 +75,8 @@
 #define SSC_SPM_INT_EN		BIT(1)
 
 enum ssusb_uwk_vers {
-	SSUSB_UWK_V1 = 1,
+	SSUSB_UWK_V0 = 0,
+	SSUSB_UWK_V1,
 	SSUSB_UWK_V2,
 };
 
@@ -282,6 +289,11 @@ static void usb_wakeup_ip_sleep_set(struct xhci_hcd_mtk *mtk, bool enable)
 	u32 reg, msk, val;
 
 	switch (mtk->uwk_vers) {
+	case SSUSB_UWK_V0:
+		reg = mtk->uwk_reg_base + PERI_WK_CTRL0;
+		msk = WC0_IS_EN | WC0_IS_C(0xf) | WC0_IS_P;
+		val = enable ? (WC0_IS_EN | WC0_IS_C(0x8)) : 0;
+		break;
 	case SSUSB_UWK_V1:
 		reg = mtk->uwk_reg_base + PERI_WK_CTRL1;
 		msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 5/7] arm64: dts: mt8183: add usb and phy nodes

[Chunfeng Yun]

Add USB related nodes for MT8183, set it as host mode by default.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: no changes
---
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 22 +++++++++
 arch/arm64/boot/dts/mediatek/mt8183.dtsi    | 55 +++++++++++++++++++++
 2 files changed, 77 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index d8e555cbb5d3..142ff52f0f42 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -6,7 +6,9 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "mt8183.dtsi"
+#include "mt6358.dtsi"
 
 / {
 	model = "MediaTek MT8183 evaluation board";
@@ -24,6 +26,16 @@
 	chosen {
 		stdout-path = "serial0:921600n8";
 	};
+
+	usb_vbus: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "p0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 42 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
 };
 
 &auxadc {
@@ -135,6 +147,16 @@
 
 };
 
+&ssusb {
+	vusb33-supply = <&mt6358_vusb_reg>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index c2749c4631bc..28da334237c6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/mt8183-clk.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
 #include "mt8183-pinfunc.h"
 
 / {
@@ -372,6 +373,35 @@
 			status = "disabled";
 		};
 
+		ssusb: usb@11201000 {
+			compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+				 <&infracfg CLK_INFRA_USB>;
+			clock-names = "sys_ck", "ref_ck";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: xhci@11200000 {
+				compatible = "mediatek,mt8183-xhci",
+					     "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+					 <&infracfg CLK_INFRA_USB>;
+				clock-names = "sys_ck", "ref_ck";
+				status = "disabled";
+			};
+		};
+
 		audiosys: syscon@11220000 {
 			compatible = "mediatek,mt8183-audiosys", "syscon";
 			reg = <0 0x11220000 0 0x1000>;
@@ -384,6 +414,31 @@
 			reg = <0 0x11f10000 0 0x1000>;
 		};
 
+		u3phy: usb-phy@11f40000 {
+			compatible = "mediatek,mt8183-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11f40000 0x1000>;
+			status = "okay";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy@0700 {
+				reg = <0x0700 0x900>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
 		mfgcfg: syscon@13000000 {
 			compatible = "mediatek,mt8183-mfgcfg", "syscon";
 			reg = <0 0x13000000 0 0x1000>;
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 6/7] arm64: dts: mt8183: enable USB remote wakeup

[Chunfeng Yun]

Enable USB remote wakeup for MT8183

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: no changes
---
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 1 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi    | 8 ++++++++
 2 files changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index 142ff52f0f42..077256f3397b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -150,6 +150,7 @@
 &ssusb {
 	vusb33-supply = <&mt6358_vusb_reg>;
 	dr_mode = "host";
+	wakeup-source;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 28da334237c6..c20cc0e8c2b4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -215,6 +215,13 @@
 			#clock-cells = <1>;
 		};
 
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8183-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@10005000 {
 			compatible = "mediatek,mt8183-pinctrl";
 			reg = <0 0x10005000 0 0x1000>,
@@ -384,6 +391,7 @@
 			clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
 				 <&infracfg CLK_INFRA_USB>;
 			clock-names = "sys_ck", "ref_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 0>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 7/7] arm64: dts: mt8183: tune disconnect threshold of u2phy

[Chunfeng Yun]

Set DISCTH to max-15, replace the default value 8, due to
default disconnect threshold is lower than USB SPEC define

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: new patch
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index c20cc0e8c2b4..4f4d4a5ed422 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -435,6 +435,7 @@
 				clocks = <&clk26m>;
 				clock-names = "ref";
 				#phy-cells = <1>;
+				mediatek,discth = <15>;
 				status = "okay";
 			};
 
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 4/7] usb: mtk-xhci: support ip-sleep wakeup for MT8183

[Mathias Nyman]

On 28.8.2019 10.34, Chunfeng Yun wrote:
> Support USB wakeup by ip-sleep mode for MT8183, it's similar to
> MT8173
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>

Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel