From: Dong Aisheng <aisheng.dong@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Dong Aisheng <aisheng.dong@nxp.com>,
devicetree@vger.kernel.org, dongas86@gmail.com,
catalin.marinas@arm.com, will.deacon@arm.com,
oliver.graute@gmail.com, robh+dt@kernel.org, linux-imx@nxp.com,
kernel@pengutronix.de, fabio.estevam@nxp.com,
shawnguo@kernel.org
Subject: [PATCH V3 00/15] arm64: dts: imx8: architecture improvement and adding imx8qm support
Date: Thu, 12 Sep 2019 23:30:37 +0800 [thread overview]
Message-ID: <1568302252-28066-1-git-send-email-aisheng.dong@nxp.com> (raw)
IMX SCU based platforms (e.g. MX8QM/MX8QXP) are comprised of a number of SS
(Subsystems), those SS may be shared between different SoCs while most of them
can be reused like Devices Resources, Clocks, Power domains and etc.
This patch series aims to improve the MX8 architecture to comply with the HW
design to save a lot of duplicated codes and benefits us a better
maintainability and scalability in the future.
This patch series depends on another clk new binding series:
https://patchwork.kernel.org/cover/11046287/
NOTE: for the missing undocumented compatible strings for the new SoC IMX8QM
in this patch series. It will be sent in another patch series later.
ChangeLog:
v2->v3:
* use clock-indices property instead of bit-offset property suggested by Shawn Guo
* rebase to latest shawn/for-next
v1->v2:
* change to the new two cells scu clock binding, so original adding scu clocks
patches were removed.
* Move scu pd node above clk node
Dong Aisheng (15):
arm64: dts: imx8qxp: add fallback compatible string for scu pd
arm64: dts: imx8qxp: move scu pd node before scu clock node
arm64: dts: imx8qxp: orginize dts in subsystems
arm64: dts: imx8: add lsio lpcg clocks
arm64: dts: imx8: add conn lpcg clocks
arm64: dts: imx8: add adma lpcg clocks
arm64: dts: imx8: switch to two cell scu clock binding
arm64: dts: imx8: switch to new lpcg clock binding
arm64: dts: imx8qm: add lsio ss support
arm64: dts: imx8qm: add conn ss support
arm64: dts: imx8: split adma ss into dma and audio ss
arm64: dts: imx8qm: add dma ss support
arm64: dts: imx: add imx8qm common dts file
arm64: dts: imx: add imx8qm mek support
arm64: defconfig: add imx8qm mek support
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi | 8 +
arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi | 67 ++++
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 192 +++++++++
arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi | 19 +
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 209 ++++++++++
arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi | 310 +++++++++++++++
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 144 +++++++
arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi | 21 +
arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi | 51 +++
arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi | 61 +++
arch/arm64/boot/dts/freescale/imx8qm.dtsi | 180 +++++++++
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts | 16 +-
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 8 +-
arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi | 37 ++
arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi | 21 +
arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi | 61 +++
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 431 ++-------------------
arch/arm64/configs/defconfig | 1 +
19 files changed, 1420 insertions(+), 418 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-mek.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-09-12 15:32 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-12 15:30 Dong Aisheng [this message]
2019-09-12 15:30 ` [PATCH V3 01/15] arm64: dts: imx8qxp: add fallback compatible string for scu pd Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 02/15] arm64: dts: imx8qxp: move scu pd node before scu clock node Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 03/15] arm64: dts: imx8qxp: orginize dts in subsystems Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 04/15] arm64: dts: imx8: add lsio lpcg clocks Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 05/15] arm64: dts: imx8: add conn " Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 06/15] arm64: dts: imx8: add adma " Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 07/15] arm64: dts: imx8: switch to two cell scu clock binding Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 08/15] arm64: dts: imx8: switch to new lpcg " Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 09/15] arm64: dts: imx8qm: add lsio ss support Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 10/15] arm64: dts: imx8qm: add conn " Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 11/15] arm64: dts: imx8: split adma ss into dma and audio ss Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 12/15] arm64: dts: imx8qm: add dma ss support Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 13/15] arm64: dts: imx: add imx8qm common dts file Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 14/15] arm64: dts: imx: add imx8qm mek support Dong Aisheng
2019-09-12 15:30 ` [PATCH V3 15/15] arm64: defconfig: " Dong Aisheng
2019-09-13 12:16 ` [PATCH V3 00/15] arm64: dts: imx8: architecture improvement and adding imx8qm support Oliver Graute
2019-09-13 16:43 ` Aisheng Dong
2019-09-16 11:22 ` Oliver Graute
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1568302252-28066-1-git-send-email-aisheng.dong@nxp.com \
--to=aisheng.dong@nxp.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=dongas86@gmail.com \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=oliver.graute@gmail.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).