linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Wahren <wahrenst@gmx.net>
To: Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Eric Anholt <eric@anholt.net>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>
Cc: devicetree@vger.kernel.org,
	Catalin Marinas <catalin.marinas@arm.com>,
	linux-bluetooth@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com,
	Stefan Wahren <wahrenst@gmx.net>, Will Deacon <will@kernel.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 07/10] ARM: bcm: Add support for BCM2711 SoC
Date: Sun,  6 Oct 2019 17:28:25 +0200	[thread overview]
Message-ID: <1570375708-26965-8-git-send-email-wahrenst@gmx.net> (raw)
In-Reply-To: <1570375708-26965-1-git-send-email-wahrenst@gmx.net>

Add the BCM2711 to ARCH_BCM2835, but use new machine board code
because of the differences.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Florian Fanelli <f.fainelli@gmail.com>
---
 arch/arm/mach-bcm/Kconfig    |  4 +++-
 arch/arm/mach-bcm/Makefile   |  3 ++-
 arch/arm/mach-bcm/bcm2711.c  | 24 ++++++++++++++++++++++++
 arch/arm64/Kconfig.platforms |  5 +++--
 4 files changed, 32 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/mach-bcm/bcm2711.c

diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 5e5f1fa..e4e25f2 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -161,6 +161,8 @@ config ARCH_BCM2835
 	select GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_411920 if ARCH_MULTI_V6
+	select ARM_GIC if ARCH_MULTI_V7
+	select ZONE_DMA if ARCH_MULTI_V7
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
 	select TIMER_OF
@@ -169,7 +171,7 @@ config ARCH_BCM2835
 	select PINCTRL_BCM2835
 	select MFD_CORE
 	help
-	  This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
+	  This enables support for the Broadcom BCM2711 and BCM283x SoCs.
 	  This SoC is used in the Raspberry Pi and Roku 2 devices.

 config ARCH_BCM_53573
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index b59c813..7baa8c9 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -42,8 +42,9 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
 obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o

 # BCM2835
-obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
 ifeq ($(CONFIG_ARCH_BCM2835),y)
+obj-y				+= board_bcm2835.o
+obj-y				+= bcm2711.o
 ifeq ($(CONFIG_ARM),y)
 obj-$(CONFIG_SMP)		+= platsmp.o
 endif
diff --git a/arch/arm/mach-bcm/bcm2711.c b/arch/arm/mach-bcm/bcm2711.c
new file mode 100644
index 0000000..dbe2967
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm2711.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Stefan Wahren
+ */
+
+#include <linux/of_address.h>
+
+#include <asm/mach/arch.h>
+
+#include "platsmp.h"
+
+static const char * const bcm2711_compat[] = {
+#ifdef CONFIG_ARCH_MULTI_V7
+	"brcm,bcm2711",
+#endif
+};
+
+DT_MACHINE_START(BCM2711, "BCM2711")
+#ifdef CONFIG_ZONE_DMA
+	.dma_zone_size	= SZ_1G,
+#endif
+	.dt_compat = bcm2711_compat,
+	.smp = smp_ops(bcm2836_smp_ops),
+MACHINE_END
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 16d7614..63b463b 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -37,11 +37,12 @@ config ARCH_BCM2835
 	select PINCTRL
 	select PINCTRL_BCM2835
 	select ARM_AMBA
+	select ARM_GIC
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER
 	help
-	  This enables support for the Broadcom BCM2837 SoC.
-	  This SoC is used in the Raspberry Pi 3 device.
+	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
+	  These SoCs are used in the Raspberry Pi 3 and 4 devices.

 config ARCH_BCM_IPROC
 	bool "Broadcom iProc SoC Family"
--
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-10-06 15:29 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-06 15:28 [PATCH V4 00/10] ARM: Add minimal Raspberry Pi 4 support Stefan Wahren
2019-10-06 15:28 ` [PATCH V4 01/10] bluetooth: hci_bcm: Fix RTS handling during startup Stefan Wahren
2019-10-20 21:17   ` Stefan Wahren
2019-12-16 13:25     ` Ondřej Jirman
2019-12-16 18:28       ` Stefan Wahren
2019-12-16 19:42         ` Ondřej Jirman
2019-12-16 19:56           ` Stefan Wahren
2019-12-17 12:59         ` Stefan Wahren
2019-12-17 13:41           ` Ondřej Jirman
2019-12-19 19:54           ` Marcel Holtmann
2019-10-21 15:05   ` Marcel Holtmann
2019-10-06 15:28 ` [PATCH V4 02/10] ARM: dts: bcm283x: Remove simple-bus from fixed clocks Stefan Wahren
2019-10-06 15:28 ` [PATCH V4 03/10] ARM: dts: bcm283x: Remove brcm, bcm2835-pl011 compatible Stefan Wahren
2019-10-06 15:28 ` [PATCH V4 04/10] ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi Stefan Wahren
2019-10-06 15:28 ` [PATCH V4 05/10] dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema Stefan Wahren
2019-10-06 15:28 ` [PATCH V4 06/10] dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema Stefan Wahren
2019-10-06 15:28 ` Stefan Wahren [this message]
2019-10-06 15:28 ` [PATCH V4 08/10] ARM: dts: Add minimal Raspberry Pi 4 support Stefan Wahren
2019-10-06 15:28 ` [PATCH V4 09/10] arm64: dts: broadcom: Add reference to RPi 4 B Stefan Wahren
2019-10-06 15:28 ` [PATCH V4 10/10] MAINTAINERS: Add BCM2711 to BCM2835 ARCH Stefan Wahren
2019-10-07 10:07 ` [PATCH V4 00/10] ARM: Add minimal Raspberry Pi 4 support Matthias Brugger
2019-10-11 14:46 ` Stefan Wahren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1570375708-26965-8-git-send-email-wahrenst@gmx.net \
    --to=wahrenst@gmx.net \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eric@anholt.net \
    --cc=f.fainelli@gmail.com \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mark.rutland@arm.com \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=sbranden@broadcom.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).