* [PATCH v2] memory: mtk-smi: Add bandwidth initial setting for MT6779
@ 2019-12-09 6:19 Ming-Fan Chen
2019-12-09 6:19 ` [PATCH v2 0/2] " Ming-Fan Chen
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Ming-Fan Chen @ 2019-12-09 6:19 UTC (permalink / raw)
To: Rob Herring, Matthias Brugger
Cc: devicetree, Joerg Roedel, wsd_upstream, linux-kernel, Evan Green,
linux-mediatek, Yong Wu, linux-arm-kernel
This patch add description and bandwidth initial golden setting for MT6779 SMI.
The setting make better performance of memory control for multimedia modules.
changelog since v1:
-add description of GALS for mt6779 into smi-common documentation
-remove unused define
-rename structure member to correspond to related registers
-replace pointer of array with single pointer to reduce intention
Ming-Fan Chen (2):
dt-bindings: mediatek: Add binding for MT6779 SMI
memory: mtk-smi: Add bandwidth initial golden setting for MT6779
.../memory-controllers/mediatek,smi-common.txt | 5 +-
.../memory-controllers/mediatek,smi-larb.txt | 3 +-
drivers/memory/mtk-smi.c | 143 +++++++++++++++++++-
3 files changed, 147 insertions(+), 4 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 0/2] memory: mtk-smi: Add bandwidth initial setting for MT6779
2019-12-09 6:19 [PATCH v2] memory: mtk-smi: Add bandwidth initial setting for MT6779 Ming-Fan Chen
@ 2019-12-09 6:19 ` Ming-Fan Chen
2019-12-09 6:19 ` [PATCH v2 1/2] dt-bindings: mediatek: Add binding for MT6779 SMI Ming-Fan Chen
2019-12-09 6:19 ` [PATCH v2 2/2] memory: mtk-smi: Add bandwidth initial golden setting for MT6779 Ming-Fan Chen
2 siblings, 0 replies; 6+ messages in thread
From: Ming-Fan Chen @ 2019-12-09 6:19 UTC (permalink / raw)
To: Rob Herring, Matthias Brugger
Cc: devicetree, Joerg Roedel, wsd_upstream, linux-kernel, Evan Green,
linux-mediatek, Yong Wu, Ming-Fan Chen, linux-arm-kernel
*** BLURB HERE ***
Ming-Fan Chen (2):
dt-bindings: mediatek: Add binding for MT6779 SMI
memory: mtk-smi: Add bandwidth initial golden setting for MT6779
.../memory-controllers/mediatek,smi-common.txt | 5 +-
.../memory-controllers/mediatek,smi-larb.txt | 3 +-
drivers/memory/mtk-smi.c | 143 +++++++++++++++++++-
3 files changed, 147 insertions(+), 4 deletions(-)
--
1.7.9.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/2] dt-bindings: mediatek: Add binding for MT6779 SMI
2019-12-09 6:19 [PATCH v2] memory: mtk-smi: Add bandwidth initial setting for MT6779 Ming-Fan Chen
2019-12-09 6:19 ` [PATCH v2 0/2] " Ming-Fan Chen
@ 2019-12-09 6:19 ` Ming-Fan Chen
2019-12-13 19:10 ` Rob Herring
2019-12-09 6:19 ` [PATCH v2 2/2] memory: mtk-smi: Add bandwidth initial golden setting for MT6779 Ming-Fan Chen
2 siblings, 1 reply; 6+ messages in thread
From: Ming-Fan Chen @ 2019-12-09 6:19 UTC (permalink / raw)
To: Rob Herring, Matthias Brugger
Cc: devicetree, Joerg Roedel, wsd_upstream, linux-kernel, Evan Green,
linux-mediatek, Yong Wu, Ming-Fan Chen, linux-arm-kernel
This patch add description for MT6779 SMI.
Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>
---
.../memory-controllers/mediatek,smi-common.txt | 5 +++--
.../memory-controllers/mediatek,smi-larb.txt | 3 ++-
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
index b478ade..b645736 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
@@ -5,7 +5,7 @@ The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
Mediatek SMI have two generations of HW architecture, here is the list
which generation the SoCs use:
generation 1: mt2701 and mt7623.
-generation 2: mt2712, mt8173 and mt8183.
+generation 2: mt2712, mt6779, mt8173 and mt8183.
There's slight differences between the two SMI, for generation 2, the
register which control the iommu port is at each larb's register base. But
@@ -18,6 +18,7 @@ Required properties:
- compatible : must be one of :
"mediatek,mt2701-smi-common"
"mediatek,mt2712-smi-common"
+ "mediatek,mt6779-smi-common"
"mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
"mediatek,mt8173-smi-common"
"mediatek,mt8183-smi-common"
@@ -35,7 +36,7 @@ Required properties:
and these 2 option clocks for generation 2 smi HW:
- "gals0": the path0 clock of GALS(Global Async Local Sync).
- "gals1": the path1 clock of GALS(Global Async Local Sync).
- Here is the list which has this GALS: mt8183.
+ Here is the list which has this GALS: mt6779 and mt8183.
Example:
smi_common: smi@14022000 {
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
index 4b369b3..8f19dfe 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
@@ -6,6 +6,7 @@ Required properties:
- compatible : must be one of :
"mediatek,mt2701-smi-larb"
"mediatek,mt2712-smi-larb"
+ "mediatek,mt6779-smi-larb"
"mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
"mediatek,mt8173-smi-larb"
"mediatek,mt8183-smi-larb"
@@ -21,7 +22,7 @@ Required properties:
- "gals": the clock for GALS(Global Async Local Sync).
Here is the list which has this GALS: mt8183.
-Required property for mt2701, mt2712 and mt7623:
+Required property for mt2701, mt2712, mt6779 and mt7623:
- mediatek,larb-id :the hardware id of this larb.
Example:
--
1.7.9.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] memory: mtk-smi: Add bandwidth initial golden setting for MT6779
2019-12-09 6:19 [PATCH v2] memory: mtk-smi: Add bandwidth initial setting for MT6779 Ming-Fan Chen
2019-12-09 6:19 ` [PATCH v2 0/2] " Ming-Fan Chen
2019-12-09 6:19 ` [PATCH v2 1/2] dt-bindings: mediatek: Add binding for MT6779 SMI Ming-Fan Chen
@ 2019-12-09 6:19 ` Ming-Fan Chen
2019-12-27 7:21 ` Yong Wu
2 siblings, 1 reply; 6+ messages in thread
From: Ming-Fan Chen @ 2019-12-09 6:19 UTC (permalink / raw)
To: Rob Herring, Matthias Brugger
Cc: devicetree, Joerg Roedel, wsd_upstream, linux-kernel, Evan Green,
linux-mediatek, Yong Wu, Ming-Fan Chen, linux-arm-kernel
SMI bandwidth initial golden setting for MT6779 make sure
better performance of memory control for multimedia modules.
Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>
---
drivers/memory/mtk-smi.c | 143 +++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 142 insertions(+), 1 deletion(-)
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 439d7d8..6b18b71 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -41,21 +41,49 @@
#define SMI_LARB_NONSEC_CON(id) (0x380 + ((id) * 4))
#define F_MMU_EN BIT(0)
+#define SMI_LARB_CMD_THRT_CON 0x24
+#define SMI_LARB_SW_FLAG 0x40
+#define SMI_LARB_OSTDL_PORT 0x200
+#define SMI_LARB_OSTDL_PORTx(id) (SMI_LARB_OSTDL_PORT + (((id) & 0x1f) << 2))
+
/* SMI COMMON */
+#define SMI_L1LEN 0x100
+#define SMI_L1ARB0 0x104
+#define SMI_L1ARB(id) (SMI_L1ARB0 + (((id) & 0x7) << 2))
+
#define SMI_BUS_SEL 0x220
#define SMI_BUS_LARB_SHIFT(larbid) ((larbid) << 1)
/* All are MMU0 defaultly. Only specialize mmu1 here. */
#define F_MMU1_LARB(larbid) (0x1 << SMI_BUS_LARB_SHIFT(larbid))
+#define SMI_M4U_TH 0x234
+#define SMI_FIFO_TH1 0x238
+#define SMI_FIFO_TH2 0x23c
+#define SMI_DCM 0x300
+#define SMI_DUMMY 0x444
+
+#define SMI_LARB_PORT_NR_MAX 32
+#define SMI_LARB_MISC_NR 2
+#define SMI_COMMON_MISC_NR 6
+
enum mtk_smi_gen {
MTK_SMI_GEN1,
MTK_SMI_GEN2
};
+struct mtk_smi_reg_pair {
+ u16 offset;
+ u32 value;
+};
+
struct mtk_smi_common_plat {
enum mtk_smi_gen gen;
bool has_gals;
u32 bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
+ bool has_bwc;
+ u8 larb_nr;
+ const u16 *l1arb;
+ const struct mtk_smi_reg_pair *misc;
};
struct mtk_smi_larb_gen {
@@ -63,6 +91,9 @@ struct mtk_smi_larb_gen {
void (*config_port)(struct device *);
unsigned int larb_direct_to_common_mask;
bool has_gals;
+ bool has_bwc;
+ const u8 (*ostdl)[SMI_LARB_PORT_NR_MAX];
+ const struct mtk_smi_reg_pair (*misc)[SMI_LARB_MISC_NR];
};
struct mtk_smi {
@@ -161,6 +192,8 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
struct mtk_smi_larb *larb = dev_get_drvdata(dev);
u32 reg;
int i;
+ const u8 *ostdl;
+ const struct mtk_smi_reg_pair *misc;
if (BIT(larb->larbid) & larb->larb_gen->larb_direct_to_common_mask)
return;
@@ -170,6 +203,20 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
reg |= F_MMU_EN;
writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
}
+
+ if (!larb->larb_gen->has_bwc)
+ return;
+
+ for (i = 0, ostdl = larb->larb_gen->ostdl[larb->larbid];
+ i < SMI_LARB_PORT_NR_MAX; i++)
+ writel_relaxed(ostdl[i],
+ larb->base + SMI_LARB_OSTDL_PORTx(i));
+
+ for (i = 0, misc = larb->larb_gen->misc[larb->larbid];
+ i < SMI_LARB_MISC_NR; i++)
+ writel_relaxed(misc[i].value,
+ larb->base + misc[i].offset);
+ wmb(); /* make sure settings are written */
}
static void mtk_smi_larb_config_port_mt8173(struct device *dev)
@@ -239,6 +286,55 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
.larb_direct_to_common_mask = BIT(8) | BIT(9), /* bdpsys */
};
+static const u8 mtk_smi_larb_mt6779_ostdl[][SMI_LARB_PORT_NR_MAX] = {
+ {0x28, 0x28, 0x01, 0x28, 0x01, 0x01, 0x0a, 0x0a, 0x28,},
+ {0x28, 0x01, 0x28, 0x28, 0x0a, 0x01, 0x01, 0x0d, 0x0d, 0x07,
+ 0x01, 0x07, 0x01, 0x28,},
+ {0x18, 0x01, 0x08, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02,
+ 0x01, 0x01},
+ {0x01, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01, 0x04, 0x02, 0x01,
+ 0x04, 0x01, 0x01, 0x01, 0x01, 0x04, 0x0b, 0x13, 0x14,},
+ {},
+ {0x13, 0x0f, 0x0d, 0x07, 0x07, 0x04, 0x03, 0x01, 0x03, 0x01,
+ 0x05, 0x0c, 0x01, 0x01, 0x08, 0x06, 0x02, 0x01, 0x08, 0x08,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,},
+ {0x01, 0x01, 0x01,},
+ {0x01, 0x01, 0x01, 0x01,},
+ {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,},
+ {0x1f, 0x1a, 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x1f, 0x04,
+ 0x04, 0x01, 0x01, 0x01, 0x02, 0x02, 0x04, 0x02, 0x01, 0x02,
+ 0x04, 0x02, 0x02, 0x01,},
+ {0x1f, 0x1a, 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x1f, 0x1a,
+ 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x01, 0x02, 0x02, 0x04,
+ 0x02, 0x0a, 0x02, 0x02, 0x04, 0x02, 0x0a, 0x02, 0x04, 0x02, 0x04,},
+ {0x01, 0x01, 0x01, 0x01, 0x01,},
+};
+
+static const struct mtk_smi_reg_pair
+mtk_smi_larb_mt6779_misc[][SMI_LARB_MISC_NR] = {
+ {{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
+ {{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
+ {{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
+ {},
+ {{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
+ {{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
+ {{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
+ {{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
+ {{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
+ {{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
+ {{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt6779 = {
+ .config_port = mtk_smi_larb_config_port_gen2_general,
+ .larb_direct_to_common_mask =
+ BIT(4) | BIT(6) | BIT(11) | BIT(12) | BIT(13),
+ /* DUMMY | IPU0 | IPU1 | CCU | MDLA */
+ .has_bwc = true,
+ .ostdl = mtk_smi_larb_mt6779_ostdl,
+ .misc = mtk_smi_larb_mt6779_misc,
+};
+
static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
.has_gals = true,
.config_port = mtk_smi_larb_config_port_gen2_general,
@@ -260,6 +356,10 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
.data = &mtk_smi_larb_mt2712
},
{
+ .compatible = "mediatek,mt6779-smi-larb",
+ .data = &mtk_smi_larb_mt6779
+ },
+ {
.compatible = "mediatek,mt8183-smi-larb",
.data = &mtk_smi_larb_mt8183
},
@@ -386,6 +486,31 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
.gen = MTK_SMI_GEN2,
};
+static const u16 mtk_smi_common_mt6779_l1arb[] = {
+ 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000,
+};
+
+static const struct
+mtk_smi_reg_pair mtk_smi_common_mt6779_misc[SMI_COMMON_MISC_NR] = {
+ {SMI_L1LEN, 0xb},
+ {SMI_M4U_TH, 0xe100e10},
+ {SMI_FIFO_TH1, 0x506090a},
+ {SMI_FIFO_TH2, 0x506090a},
+ {SMI_DCM, 0x4f1},
+ {SMI_DUMMY, 0x1},
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt6779 = {
+ .gen = MTK_SMI_GEN2,
+ .has_gals = true,
+ .bus_sel = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
+ F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
+ .has_bwc = true,
+ .larb_nr = ARRAY_SIZE(mtk_smi_common_mt6779_l1arb),
+ .l1arb = mtk_smi_common_mt6779_l1arb,
+ .misc = mtk_smi_common_mt6779_misc,
+};
+
static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
.gen = MTK_SMI_GEN2,
.has_gals = true,
@@ -407,6 +532,10 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
.data = &mtk_smi_common_gen2,
},
{
+ .compatible = "mediatek,mt6779-smi-common",
+ .data = &mtk_smi_common_mt6779,
+ },
+ {
.compatible = "mediatek,mt8183-smi-common",
.data = &mtk_smi_common_mt8183,
},
@@ -484,7 +613,7 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
{
struct mtk_smi *common = dev_get_drvdata(dev);
u32 bus_sel = common->plat->bus_sel;
- int ret;
+ int i, ret;
ret = mtk_smi_clk_enable(common);
if (ret) {
@@ -494,6 +623,18 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
if (common->plat->gen == MTK_SMI_GEN2 && bus_sel)
writel(bus_sel, common->base + SMI_BUS_SEL);
+
+ if (!common->plat->has_bwc)
+ return 0;
+
+ for (i = 0; i < common->plat->larb_nr; i++)
+ writel_relaxed(common->plat->l1arb[i],
+ common->base + SMI_L1ARB(i));
+
+ for (i = 0; i < SMI_COMMON_MISC_NR; i++)
+ writel_relaxed(common->plat->misc[i].value,
+ common->base + common->plat->misc[i].value);
+ wmb(); /* make sure settings are written */
return 0;
}
--
1.7.9.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: mediatek: Add binding for MT6779 SMI
2019-12-09 6:19 ` [PATCH v2 1/2] dt-bindings: mediatek: Add binding for MT6779 SMI Ming-Fan Chen
@ 2019-12-13 19:10 ` Rob Herring
0 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2019-12-13 19:10 UTC (permalink / raw)
To: Ming-Fan Chen
Cc: devicetree, Joerg Roedel, wsd_upstream, linux-kernel, Evan Green,
linux-mediatek, linux-arm-kernel, Matthias Brugger,
Ming-Fan Chen, Yong Wu
On Mon, 9 Dec 2019 14:19:30 +0800, Ming-Fan Chen wrote:
> This patch add description for MT6779 SMI.
>
> Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>
> ---
> .../memory-controllers/mediatek,smi-common.txt | 5 +++--
> .../memory-controllers/mediatek,smi-larb.txt | 3 ++-
> 2 files changed, 5 insertions(+), 3 deletions(-)
>
Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.
If a tag was not added on purpose, please state why and what changed.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/2] memory: mtk-smi: Add bandwidth initial golden setting for MT6779
2019-12-09 6:19 ` [PATCH v2 2/2] memory: mtk-smi: Add bandwidth initial golden setting for MT6779 Ming-Fan Chen
@ 2019-12-27 7:21 ` Yong Wu
0 siblings, 0 replies; 6+ messages in thread
From: Yong Wu @ 2019-12-27 7:21 UTC (permalink / raw)
To: Ming-Fan Chen
Cc: devicetree, Joerg Roedel, wsd_upstream, linux-kernel, Evan Green,
Rob Herring, linux-mediatek, Matthias Brugger, linux-arm-kernel
On Mon, 2019-12-09 at 14:19 +0800, Ming-Fan Chen wrote:
> SMI bandwidth initial golden setting for MT6779 make sure
> better performance of memory control for multimedia modules.
>
> Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>
> ---
> drivers/memory/mtk-smi.c | 143 +++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 142 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index 439d7d8..6b18b71 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -41,21 +41,49 @@
> #define SMI_LARB_NONSEC_CON(id) (0x380 + ((id) * 4))
> #define F_MMU_EN BIT(0)
>
> +#define SMI_LARB_CMD_THRT_CON 0x24
> +#define SMI_LARB_SW_FLAG 0x40
> +#define SMI_LARB_OSTDL_PORT 0x200
> +#define SMI_LARB_OSTDL_PORTx(id) (SMI_LARB_OSTDL_PORT + (((id) & 0x1f) << 2))
> +
> /* SMI COMMON */
> +#define SMI_L1LEN 0x100
> +#define SMI_L1ARB0 0x104
> +#define SMI_L1ARB(id) (SMI_L1ARB0 + (((id) & 0x7) << 2))
> +
> #define SMI_BUS_SEL 0x220
> #define SMI_BUS_LARB_SHIFT(larbid) ((larbid) << 1)
> /* All are MMU0 defaultly. Only specialize mmu1 here. */
> #define F_MMU1_LARB(larbid) (0x1 << SMI_BUS_LARB_SHIFT(larbid))
>
> +#define SMI_M4U_TH 0x234
> +#define SMI_FIFO_TH1 0x238
> +#define SMI_FIFO_TH2 0x23c
> +#define SMI_DCM 0x300
> +#define SMI_DUMMY 0x444
> +
> +#define SMI_LARB_PORT_NR_MAX 32
> +#define SMI_LARB_MISC_NR 2
> +#define SMI_COMMON_MISC_NR 6
> +
> enum mtk_smi_gen {
> MTK_SMI_GEN1,
> MTK_SMI_GEN2
> };
>
> +struct mtk_smi_reg_pair {
> + u16 offset;
> + u32 value;
> +};
> +
> struct mtk_smi_common_plat {
> enum mtk_smi_gen gen;
> bool has_gals;
> u32 bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
> + bool has_bwc;
> + u8 larb_nr;
> + const u16 *l1arb;
> + const struct mtk_smi_reg_pair *misc;
> };
>
> struct mtk_smi_larb_gen {
> @@ -63,6 +91,9 @@ struct mtk_smi_larb_gen {
> void (*config_port)(struct device *);
> unsigned int larb_direct_to_common_mask;
> bool has_gals;
> + bool has_bwc;
> + const u8 (*ostdl)[SMI_LARB_PORT_NR_MAX];
> + const struct mtk_smi_reg_pair (*misc)[SMI_LARB_MISC_NR];
> };
>
> struct mtk_smi {
> @@ -161,6 +192,8 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
> struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> u32 reg;
> int i;
> + const u8 *ostdl;
> + const struct mtk_smi_reg_pair *misc;
Normally define the local variables from long to short.
That means:
+ const struct mtk_smi_reg_pair *misc;
+ const u8 *ostdl;
u32 reg;
int i;
>
> if (BIT(larb->larbid) & larb->larb_gen->larb_direct_to_common_mask)
> return;
> @@ -170,6 +203,20 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
> reg |= F_MMU_EN;
> writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
> }
> +
> + if (!larb->larb_gen->has_bwc)
> + return;
> +
> + for (i = 0, ostdl = larb->larb_gen->ostdl[larb->larbid];
> + i < SMI_LARB_PORT_NR_MAX; i++)
> + writel_relaxed(ostdl[i],
> + larb->base + SMI_LARB_OSTDL_PORTx(i));
the writel_relaxed can be done in one line, it isn't over 80.
ostdl = larb->larb_gen->ostdl[larb->larbid];
for (i = 0; i < SMI_LARB_PORT_NR_MAX; i++)
writel_relaxed(ostdl[i], larb->base + SMI_LARB_OSTDL_PORTx(i));
> +
> + for (i = 0, misc = larb->larb_gen->misc[larb->larbid];
> + i < SMI_LARB_MISC_NR; i++)
> + writel_relaxed(misc[i].value,
> + larb->base + misc[i].offset);
ditto. it also don't over 80 chars.
misc = larb->larb_gen->misc[larb->larbid];
for (i = 0; i < SMI_LARB_MISC_NR; i++)
writel_relaxed(misc[i].value, larb->base + misc[i].offset);
> + wmb(); /* make sure settings are written */
> }
>
> static void mtk_smi_larb_config_port_mt8173(struct device *dev)
> @@ -239,6 +286,55 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
> .larb_direct_to_common_mask = BIT(8) | BIT(9), /* bdpsys */
> };
>
> +static const u8 mtk_smi_larb_mt6779_ostdl[][SMI_LARB_PORT_NR_MAX] = {
> + {0x28, 0x28, 0x01, 0x28, 0x01, 0x01, 0x0a, 0x0a, 0x28,},
> + {0x28, 0x01, 0x28, 0x28, 0x0a, 0x01, 0x01, 0x0d, 0x0d, 0x07,
> + 0x01, 0x07, 0x01, 0x28,},
> + {0x18, 0x01, 0x08, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02,
> + 0x01, 0x01},
> + {0x01, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01, 0x04, 0x02, 0x01,
> + 0x04, 0x01, 0x01, 0x01, 0x01, 0x04, 0x0b, 0x13, 0x14,},
> + {},
> + {0x13, 0x0f, 0x0d, 0x07, 0x07, 0x04, 0x03, 0x01, 0x03, 0x01,
> + 0x05, 0x0c, 0x01, 0x01, 0x08, 0x06, 0x02, 0x01, 0x08, 0x08,
> + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,},
> + {0x01, 0x01, 0x01,},
> + {0x01, 0x01, 0x01, 0x01,},
> + {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,},
> + {0x1f, 0x1a, 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x1f, 0x04,
> + 0x04, 0x01, 0x01, 0x01, 0x02, 0x02, 0x04, 0x02, 0x01, 0x02,
> + 0x04, 0x02, 0x02, 0x01,},
> + {0x1f, 0x1a, 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x1f, 0x1a,
> + 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x01, 0x02, 0x02, 0x04,
> + 0x02, 0x0a, 0x02, 0x02, 0x04, 0x02, 0x0a, 0x02, 0x04, 0x02, 0x04,},
> + {0x01, 0x01, 0x01, 0x01, 0x01,},
> +};
> +
> +static const struct mtk_smi_reg_pair
> +mtk_smi_larb_mt6779_misc[][SMI_LARB_MISC_NR] = {
> + {{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
I am confused why we need SMI_LARB_SW_FLAG. Does it only indicate that
the setting is not the default one?. I guess we also get it from the
other regsiter, like SMI_LARB_CMD_THRT_CON.
> + {{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
> + {{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
> + {},
> + {{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
> + {{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
> + {{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
> + {{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
> + {{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
> + {{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
> + {{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
> +};
> +
> +static const struct mtk_smi_larb_gen mtk_smi_larb_mt6779 = {
> + .config_port = mtk_smi_larb_config_port_gen2_general,
> + .larb_direct_to_common_mask =
> + BIT(4) | BIT(6) | BIT(11) | BIT(12) | BIT(13),
> + /* DUMMY | IPU0 | IPU1 | CCU | MDLA */
> + .has_bwc = true,
Does the larb also have has_gals?
> + .ostdl = mtk_smi_larb_mt6779_ostdl,
> + .misc = mtk_smi_larb_mt6779_misc,
> +};
> +
> static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
> .has_gals = true,
> .config_port = mtk_smi_larb_config_port_gen2_general,
> @@ -260,6 +356,10 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
> .data = &mtk_smi_larb_mt2712
> },
> {
> + .compatible = "mediatek,mt6779-smi-larb",
> + .data = &mtk_smi_larb_mt6779
> + },
> + {
> .compatible = "mediatek,mt8183-smi-larb",
> .data = &mtk_smi_larb_mt8183
> },
> @@ -386,6 +486,31 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
> .gen = MTK_SMI_GEN2,
> };
>
> +static const u16 mtk_smi_common_mt6779_l1arb[] = {
> + 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000,
> +};
> +
> +static const struct
> +mtk_smi_reg_pair mtk_smi_common_mt6779_misc[SMI_COMMON_MISC_NR] = {
> + {SMI_L1LEN, 0xb},
> + {SMI_M4U_TH, 0xe100e10},
> + {SMI_FIFO_TH1, 0x506090a},
> + {SMI_FIFO_TH2, 0x506090a},
> + {SMI_DCM, 0x4f1},
> + {SMI_DUMMY, 0x1},
> +};
> +
> +static const struct mtk_smi_common_plat mtk_smi_common_mt6779 = {
> + .gen = MTK_SMI_GEN2,
> + .has_gals = true,
> + .bus_sel = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
> + F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
> + .has_bwc = true,
> + .larb_nr = ARRAY_SIZE(mtk_smi_common_mt6779_l1arb),
> + .l1arb = mtk_smi_common_mt6779_l1arb,
> + .misc = mtk_smi_common_mt6779_misc,
How about add a new one?:
misc_nr = ARRAY_SIZE(mtk_smi_common_mt6779_misc);
Because we should move the "bus_sel" into this misc structure later,
right?
> +};
> +
> static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
> .gen = MTK_SMI_GEN2,
> .has_gals = true,
> @@ -407,6 +532,10 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
> .data = &mtk_smi_common_gen2,
> },
> {
> + .compatible = "mediatek,mt6779-smi-common",
> + .data = &mtk_smi_common_mt6779,
> + },
> + {
> .compatible = "mediatek,mt8183-smi-common",
> .data = &mtk_smi_common_mt8183,
> },
> @@ -484,7 +613,7 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
> {
> struct mtk_smi *common = dev_get_drvdata(dev);
> u32 bus_sel = common->plat->bus_sel;
> - int ret;
> + int i, ret;
>
> ret = mtk_smi_clk_enable(common);
> if (ret) {
> @@ -494,6 +623,18 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
>
> if (common->plat->gen == MTK_SMI_GEN2 && bus_sel)
> writel(bus_sel, common->base + SMI_BUS_SEL);
> +
> + if (!common->plat->has_bwc)
> + return 0;
> +
> + for (i = 0; i < common->plat->larb_nr; i++)
> + writel_relaxed(common->plat->l1arb[i],
> + common->base + SMI_L1ARB(i));
> +
> + for (i = 0; i < SMI_COMMON_MISC_NR; i++)
> + writel_relaxed(common->plat->misc[i].value,
> + common->base + common->plat->misc[i].value);
> + wmb(); /* make sure settings are written */
> return 0;
> }
In the end, As the comment in v1, this patch should split:
a. add basic mt6779 smi-larb support(only add nodes and config_port like
the previous SoC.)
b. add bandwidth initial settting for mt6779.
c. Move the bus_sel into the smi-common misc setting.
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-12-27 7:22 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-09 6:19 [PATCH v2] memory: mtk-smi: Add bandwidth initial setting for MT6779 Ming-Fan Chen
2019-12-09 6:19 ` [PATCH v2 0/2] " Ming-Fan Chen
2019-12-09 6:19 ` [PATCH v2 1/2] dt-bindings: mediatek: Add binding for MT6779 SMI Ming-Fan Chen
2019-12-13 19:10 ` Rob Herring
2019-12-09 6:19 ` [PATCH v2 2/2] memory: mtk-smi: Add bandwidth initial golden setting for MT6779 Ming-Fan Chen
2019-12-27 7:21 ` Yong Wu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).