From: Hanjie Lin <hanjie.lin@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Rob Herring <robh@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, Hanjie Lin <hanjie.lin@amlogic.com>,
Victor Wan <victor.wan@amlogic.com>,
Jianxin Pan <jianxin.pan@amlogic.com>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
linux-usb@vger.kernel.org, Yue Wang <yue.wang@amlogic.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Liang Yang <liang.yang@amlogic.com>,
Qiufang Dai <qiufang.dai@amlogic.com>,
Xingyu Chen <xingyu.chen@amlogic.com>,
Carlo Caione <carlo@caione.org>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Jian Hu <jian.hu@amlogic.com>
Subject: [PATCH v5 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver
Date: Fri, 10 Jan 2020 13:42:34 +0800 [thread overview]
Message-ID: <1578634957-54826-4-git-send-email-hanjie.lin@amlogic.com> (raw)
In-Reply-To: <1578634957-54826-1-git-send-email-hanjie.lin@amlogic.com>
This adds support for the USB2 PHY found in the Amlogic A1 SoC Family.
It supports host mode only.
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
---
drivers/phy/amlogic/phy-meson-g12a-usb2.c | 85 +++++++++++++++++++++----------
1 file changed, 59 insertions(+), 26 deletions(-)
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
index 9065ffc..33296f8 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
@@ -146,11 +146,17 @@
#define RESET_COMPLETE_TIME 1000
#define PLL_RESET_COMPLETE_TIME 100
+enum meson_soc_id {
+ MESON_SOC_G12A = 0,
+ MESON_SOC_A1,
+};
+
struct phy_meson_g12a_usb2_priv {
struct device *dev;
struct regmap *regmap;
struct clk *clk;
struct reset_control *reset;
+ int soc_id;
};
static const struct regmap_config phy_meson_g12a_usb2_regmap_conf = {
@@ -164,6 +170,7 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
{
struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
int ret;
+ unsigned int value;
ret = reset_control_reset(priv->reset);
if (ret)
@@ -192,18 +199,22 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT2, 2) |
FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT1, 9));
- regmap_write(priv->regmap, PHY_CTRL_R18,
- FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) |
- FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) |
- FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) |
- FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) |
- FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) |
- FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) |
- FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) |
- FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) |
- FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) |
- FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) |
- PHY_CTRL_R18_MPLL_ACG_RANGE);
+ value = FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) |
+ FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) |
+ FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) |
+ FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) |
+ FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) |
+ FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) |
+ FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) |
+ FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) |
+ FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) |
+ FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) |
+ PHY_CTRL_R18_MPLL_ACG_RANGE;
+
+ if (priv->soc_id == MESON_SOC_A1)
+ value |= PHY_CTRL_R18_MPLL_DCO_CLK_SEL;
+
+ regmap_write(priv->regmap, PHY_CTRL_R18, value);
udelay(PLL_RESET_COMPLETE_TIME);
@@ -227,13 +238,24 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
FIELD_PREP(PHY_CTRL_R20_USB2_BGR_VREF_4_0, 0) |
FIELD_PREP(PHY_CTRL_R20_USB2_BGR_DBG_1_0, 0));
- regmap_write(priv->regmap, PHY_CTRL_R4,
- FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) |
- FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) |
- FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) |
- PHY_CTRL_R4_TEST_BYPASS_MODE_EN |
- FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) |
- FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0));
+ if (priv->soc_id == MESON_SOC_G12A)
+ regmap_write(priv->regmap, PHY_CTRL_R4,
+ FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) |
+ FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) |
+ FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) |
+ PHY_CTRL_R4_TEST_BYPASS_MODE_EN |
+ FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) |
+ FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0));
+ else if (priv->soc_id == MESON_SOC_A1) {
+ regmap_write(priv->regmap, PHY_CTRL_R21,
+ PHY_CTRL_R21_USB2_CAL_ACK_EN |
+ PHY_CTRL_R21_USB2_TX_STRG_PD |
+ FIELD_PREP(PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0, 2));
+
+ /* Analog Settings */
+ regmap_write(priv->regmap, PHY_CTRL_R13,
+ FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
+ }
/* Tuning Disconnect Threshold */
regmap_write(priv->regmap, PHY_CTRL_R3,
@@ -241,11 +263,13 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
FIELD_PREP(PHY_CTRL_R3_HSDIC_REF, 1) |
FIELD_PREP(PHY_CTRL_R3_DISC_THRESH, 3));
- /* Analog Settings */
- regmap_write(priv->regmap, PHY_CTRL_R14, 0);
- regmap_write(priv->regmap, PHY_CTRL_R13,
- PHY_CTRL_R13_UPDATE_PMA_SIGNALS |
- FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
+ if (priv->soc_id == MESON_SOC_G12A) {
+ /* Analog Settings */
+ regmap_write(priv->regmap, PHY_CTRL_R14, 0);
+ regmap_write(priv->regmap, PHY_CTRL_R13,
+ PHY_CTRL_R13_UPDATE_PMA_SIGNALS |
+ FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
+ }
return 0;
}
@@ -286,6 +310,8 @@ static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
if (IS_ERR(base))
return PTR_ERR(base);
+ priv->soc_id = (enum meson_soc_id)of_device_get_match_data(&pdev->dev);
+
priv->regmap = devm_regmap_init_mmio(dev, base,
&phy_meson_g12a_usb2_regmap_conf);
if (IS_ERR(priv->regmap))
@@ -321,8 +347,15 @@ static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
}
static const struct of_device_id phy_meson_g12a_usb2_of_match[] = {
- { .compatible = "amlogic,g12a-usb2-phy", },
- { },
+ {
+ .compatible = "amlogic,g12a-usb2-phy",
+ .data = (void *)MESON_SOC_G12A,
+ },
+ {
+ .compatible = "amlogic,a1-usb2-phy",
+ .data = (void *)MESON_SOC_A1,
+ },
+ { /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, phy_meson_g12a_usb2_of_match);
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-10 5:43 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-10 5:42 [PATCH v5 0/6] arm64: meson: Add support for USB on Amlogic A1 Hanjie Lin
2020-01-10 5:42 ` [PATCH v5 1/6] dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings Hanjie Lin
2020-01-11 20:54 ` Martin Blumenstingl
2020-01-13 1:13 ` Hanjie Lin
2020-01-10 5:42 ` [PATCH v5 2/6] dt-bindings: usb: dwc3: Add the Amlogic A1 Family DWC3 Glue Bindings Hanjie Lin
2020-01-11 20:50 ` Martin Blumenstingl
2020-01-13 1:23 ` Hanjie Lin
2020-01-14 20:10 ` Martin Blumenstingl
2020-01-10 5:42 ` Hanjie Lin [this message]
2020-01-11 20:36 ` [PATCH v5 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver Martin Blumenstingl
2020-01-15 8:01 ` Neil Armstrong
2020-01-10 5:42 ` [PATCH v5 4/6] usb: dwc3: Add Amlogic A1 DWC3 glue Hanjie Lin
2020-01-11 20:45 ` Martin Blumenstingl
2020-01-13 1:33 ` Hanjie Lin
2020-01-15 8:01 ` Neil Armstrong
2020-01-16 2:12 ` Hanjie Lin
2020-01-10 5:42 ` [PATCH v5 5/6] arm64: dts: meson: a1: Enable USB2 PHY Hanjie Lin
2020-01-10 5:42 ` [PATCH v5 6/6] arm64: dts: meson: a1: Enable DWC3 controller Hanjie Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1578634957-54826-4-git-send-email-hanjie.lin@amlogic.com \
--to=hanjie.lin@amlogic.com \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jbrunet@baylibre.com \
--cc=jian.hu@amlogic.com \
--cc=jianxin.pan@amlogic.com \
--cc=khilman@baylibre.com \
--cc=liang.yang@amlogic.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=narmstrong@baylibre.com \
--cc=qiufang.dai@amlogic.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=victor.wan@amlogic.com \
--cc=xingyu.chen@amlogic.com \
--cc=yue.wang@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).