* [PATCH v4 0/2] regulator: mt6360: Add support for MT6360 regulator
@ 2020-08-26 10:49 Gene Chen
2020-08-26 10:49 ` [PATCH v4 1/2] " Gene Chen
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Gene Chen @ 2020-08-26 10:49 UTC (permalink / raw)
To: matthias.bgg, robh+dt
Cc: gene_chen, devicetree, lgirdwood, linux-kernel, cy_huang,
benjamin.chao, broonie, linux-mediatek, Wilma.Wu,
linux-arm-kernel, shufan_lee
This patch series add MT6360 regulator support contains driver and binding document
Gene Chen (2)
regulator: mt6360: Add support for MT6360 regulator
dt-bindings: regulator: mt6360: Add DT binding
Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml | 113 ++
drivers/regulator/Kconfig | 9
drivers/regulator/Makefile | 1
drivers/regulator/mt6360-regulator.c | 459 ++++++++++
include/dt-bindings/regulator/mediatek,mt6360-regulator.h | 16
5 files changed, 598 insertions(+)
changelogs between v1 & v2
- regulator: merge regmap to mfd driver for r/w with crc
changelogs between v2 & v3
- Move regmap define to MFD parent driver
- Add bindings document
changelogs between v3 & v4
- replace of_node binding table by platform_id_table
- set regulator_desc.regulators_node find dt
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v4 1/2] regulator: mt6360: Add support for MT6360 regulator
2020-08-26 10:49 [PATCH v4 0/2] regulator: mt6360: Add support for MT6360 regulator Gene Chen
@ 2020-08-26 10:49 ` Gene Chen
2020-08-26 10:49 ` [PATCH v4 2/2] dt-bindings: regulator: mt6360: Add DT binding documentation Gene Chen
2020-08-26 12:55 ` [PATCH v4 0/2] regulator: mt6360: Add support for MT6360 regulator Mark Brown
2 siblings, 0 replies; 4+ messages in thread
From: Gene Chen @ 2020-08-26 10:49 UTC (permalink / raw)
To: matthias.bgg, robh+dt
Cc: gene_chen, devicetree, lgirdwood, linux-kernel, cy_huang,
benjamin.chao, broonie, linux-mediatek, Wilma.Wu,
linux-arm-kernel, shufan_lee
From: Gene Chen <gene_chen@richtek.com>
Add MT6360 regulator driver that contains two BUCKs and six LDOs
Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/mt6360-regulator.c | 459 +++++++++++++++++++++
.../regulator/mediatek,mt6360-regulator.h | 16 +
4 files changed, 485 insertions(+)
create mode 100644 drivers/regulator/mt6360-regulator.c
create mode 100644 include/dt-bindings/regulator/mediatek,mt6360-regulator.h
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index de17ef7..8a6c3c6 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -711,6 +711,15 @@ config REGULATOR_MT6358
This driver supports the control of different power rails of device
through regulator interface.
+config REGULATOR_MT6360
+ tristate "MT6360 SubPMIC Regulator"
+ depends on MFD_MT6360
+ help
+ Say Y here to enable MT6360 regulator support.
+ This is support MT6360 PMIC/LDO part include
+ 2-channel buck with Thermal Shutdown and Overload Protection
+ 6-channel High PSRR and Low Dropout LDO.
+
config REGULATOR_MT6380
tristate "MediaTek MT6380 PMIC"
depends on MTK_PMIC_WRAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index d8d3ecf..821a33f 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -88,6 +88,7 @@ obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
+obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o
diff --git a/drivers/regulator/mt6360-regulator.c b/drivers/regulator/mt6360-regulator.c
new file mode 100644
index 0000000..89ce379
--- /dev/null
+++ b/drivers/regulator/mt6360-regulator.c
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright (C) 2020 MediaTek Inc.
+//
+// Author: Gene Chen <gene_chen@richtek.com>
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+
+enum {
+ MT6360_REGULATOR_BUCK1 = 0,
+ MT6360_REGULATOR_BUCK2,
+ MT6360_REGULATOR_LDO6,
+ MT6360_REGULATOR_LDO7,
+ MT6360_REGULATOR_LDO1,
+ MT6360_REGULATOR_LDO2,
+ MT6360_REGULATOR_LDO3,
+ MT6360_REGULATOR_LDO5,
+ MT6360_REGULATOR_MAX,
+};
+
+struct mt6360_irq_mapping {
+ const char *name;
+ irq_handler_t handler;
+};
+
+struct mt6360_regulator_desc {
+ const struct regulator_desc desc;
+ unsigned int mode_reg;
+ unsigned int mode_mask;
+ unsigned int state_reg;
+ unsigned int state_mask;
+ const struct mt6360_irq_mapping *irq_tables;
+ int irq_table_size;
+};
+
+struct mt6360_regulator_data {
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+static irqreturn_t mt6360_pgb_event_handler(int irq, void *data)
+{
+ struct regulator_dev *rdev = data;
+
+ regulator_notifier_call_chain(rdev, REGULATOR_EVENT_FAIL, NULL);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mt6360_oc_event_handler(int irq, void *data)
+{
+ struct regulator_dev *rdev = data;
+
+ regulator_notifier_call_chain(rdev, REGULATOR_EVENT_OVER_CURRENT, NULL);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mt6360_ov_event_handler(int irq, void *data)
+{
+ struct regulator_dev *rdev = data;
+
+ regulator_notifier_call_chain(rdev, REGULATOR_EVENT_REGULATION_OUT, NULL);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mt6360_uv_event_handler(int irq, void *data)
+{
+ struct regulator_dev *rdev = data;
+
+ regulator_notifier_call_chain(rdev, REGULATOR_EVENT_UNDER_VOLTAGE, NULL);
+ return IRQ_HANDLED;
+}
+
+static const struct mt6360_irq_mapping buck1_irq_tbls[] = {
+ { "buck1_pgb_evt", mt6360_pgb_event_handler },
+ { "buck1_oc_evt", mt6360_oc_event_handler },
+ { "buck1_ov_evt", mt6360_ov_event_handler },
+ { "buck1_uv_evt", mt6360_uv_event_handler },
+};
+
+static const struct mt6360_irq_mapping buck2_irq_tbls[] = {
+ { "buck2_pgb_evt", mt6360_pgb_event_handler },
+ { "buck2_oc_evt", mt6360_oc_event_handler },
+ { "buck2_ov_evt", mt6360_ov_event_handler },
+ { "buck2_uv_evt", mt6360_uv_event_handler },
+};
+
+static const struct mt6360_irq_mapping ldo6_irq_tbls[] = {
+ { "ldo6_pgb_evt", mt6360_pgb_event_handler },
+ { "ldo6_oc_evt", mt6360_oc_event_handler },
+};
+
+static const struct mt6360_irq_mapping ldo7_irq_tbls[] = {
+ { "ldo7_pgb_evt", mt6360_pgb_event_handler },
+ { "ldo7_oc_evt", mt6360_oc_event_handler },
+};
+
+static const struct mt6360_irq_mapping ldo1_irq_tbls[] = {
+ { "ldo1_pgb_evt", mt6360_pgb_event_handler },
+ { "ldo1_oc_evt", mt6360_oc_event_handler },
+};
+
+static const struct mt6360_irq_mapping ldo2_irq_tbls[] = {
+ { "ldo2_pgb_evt", mt6360_pgb_event_handler },
+ { "ldo2_oc_evt", mt6360_oc_event_handler },
+};
+
+static const struct mt6360_irq_mapping ldo3_irq_tbls[] = {
+ { "ldo3_pgb_evt", mt6360_pgb_event_handler },
+ { "ldo3_oc_evt", mt6360_oc_event_handler },
+};
+
+static const struct mt6360_irq_mapping ldo5_irq_tbls[] = {
+ { "ldo5_pgb_evt", mt6360_pgb_event_handler },
+ { "ldo5_oc_evt", mt6360_oc_event_handler },
+};
+
+static const struct linear_range buck_vout_ranges[] = {
+ REGULATOR_LINEAR_RANGE(300000, 0x00, 0xc7, 5000),
+ REGULATOR_LINEAR_RANGE(1300000, 0xc8, 0xff, 0),
+};
+
+static const struct linear_range ldo_vout_ranges1[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0x00, 0x09, 10000),
+ REGULATOR_LINEAR_RANGE(600000, 0x0a, 0x10, 0),
+ REGULATOR_LINEAR_RANGE(610000, 0x11, 0x19, 10000),
+ REGULATOR_LINEAR_RANGE(700000, 0x1a, 0x20, 0),
+ REGULATOR_LINEAR_RANGE(710000, 0x21, 0x29, 10000),
+ REGULATOR_LINEAR_RANGE(800000, 0x2a, 0x30, 0),
+ REGULATOR_LINEAR_RANGE(810000, 0x31, 0x39, 10000),
+ REGULATOR_LINEAR_RANGE(900000, 0x3a, 0x40, 0),
+ REGULATOR_LINEAR_RANGE(910000, 0x41, 0x49, 10000),
+ REGULATOR_LINEAR_RANGE(1000000, 0x4a, 0x50, 0),
+ REGULATOR_LINEAR_RANGE(1010000, 0x51, 0x59, 10000),
+ REGULATOR_LINEAR_RANGE(1100000, 0x5a, 0x60, 0),
+ REGULATOR_LINEAR_RANGE(1110000, 0x61, 0x69, 10000),
+ REGULATOR_LINEAR_RANGE(1200000, 0x6a, 0x70, 0),
+ REGULATOR_LINEAR_RANGE(1210000, 0x71, 0x79, 10000),
+ REGULATOR_LINEAR_RANGE(1300000, 0x7a, 0x80, 0),
+ REGULATOR_LINEAR_RANGE(1310000, 0x81, 0x89, 10000),
+ REGULATOR_LINEAR_RANGE(1400000, 0x8a, 0x90, 0),
+ REGULATOR_LINEAR_RANGE(1410000, 0x91, 0x99, 10000),
+ REGULATOR_LINEAR_RANGE(1500000, 0x9a, 0xa0, 0),
+ REGULATOR_LINEAR_RANGE(1510000, 0xa1, 0xa9, 10000),
+ REGULATOR_LINEAR_RANGE(1600000, 0xaa, 0xb0, 0),
+ REGULATOR_LINEAR_RANGE(1610000, 0xb1, 0xb9, 10000),
+ REGULATOR_LINEAR_RANGE(1700000, 0xba, 0xc0, 0),
+ REGULATOR_LINEAR_RANGE(1710000, 0xc1, 0xc9, 10000),
+ REGULATOR_LINEAR_RANGE(1800000, 0xca, 0xd0, 0),
+ REGULATOR_LINEAR_RANGE(1810000, 0xd1, 0xd9, 10000),
+ REGULATOR_LINEAR_RANGE(1900000, 0xda, 0xe0, 0),
+ REGULATOR_LINEAR_RANGE(1910000, 0xe1, 0xe9, 10000),
+ REGULATOR_LINEAR_RANGE(2000000, 0xea, 0xf0, 0),
+ REGULATOR_LINEAR_RANGE(2010000, 0xf1, 0xf9, 10000),
+ REGULATOR_LINEAR_RANGE(2100000, 0xfa, 0xff, 0),
+};
+
+static const struct linear_range ldo_vout_ranges2[] = {
+ REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x09, 10000),
+ REGULATOR_LINEAR_RANGE(1300000, 0x0a, 0x10, 0),
+ REGULATOR_LINEAR_RANGE(1310000, 0x11, 0x19, 10000),
+ REGULATOR_LINEAR_RANGE(1400000, 0x1a, 0x1f, 0),
+ REGULATOR_LINEAR_RANGE(1500000, 0x20, 0x29, 10000),
+ REGULATOR_LINEAR_RANGE(1600000, 0x2a, 0x2f, 0),
+ REGULATOR_LINEAR_RANGE(1700000, 0x30, 0x39, 10000),
+ REGULATOR_LINEAR_RANGE(1800000, 0x3a, 0x40, 0),
+ REGULATOR_LINEAR_RANGE(1810000, 0x41, 0x49, 10000),
+ REGULATOR_LINEAR_RANGE(1900000, 0x4a, 0x4f, 0),
+ REGULATOR_LINEAR_RANGE(2000000, 0x50, 0x59, 10000),
+ REGULATOR_LINEAR_RANGE(2100000, 0x5a, 0x60, 0),
+ REGULATOR_LINEAR_RANGE(2110000, 0x61, 0x69, 10000),
+ REGULATOR_LINEAR_RANGE(2200000, 0x6a, 0x6f, 0),
+ REGULATOR_LINEAR_RANGE(2500000, 0x70, 0x79, 10000),
+ REGULATOR_LINEAR_RANGE(2600000, 0x7a, 0x7f, 0),
+ REGULATOR_LINEAR_RANGE(2700000, 0x80, 0x89, 10000),
+ REGULATOR_LINEAR_RANGE(2800000, 0x8a, 0x90, 0),
+ REGULATOR_LINEAR_RANGE(2810000, 0x91, 0x99, 10000),
+ REGULATOR_LINEAR_RANGE(2900000, 0x9a, 0xa0, 0),
+ REGULATOR_LINEAR_RANGE(2910000, 0xa1, 0xa9, 10000),
+ REGULATOR_LINEAR_RANGE(3000000, 0xaa, 0xb0, 0),
+ REGULATOR_LINEAR_RANGE(3010000, 0xb1, 0xb9, 10000),
+ REGULATOR_LINEAR_RANGE(3100000, 0xba, 0xc0, 0),
+ REGULATOR_LINEAR_RANGE(3110000, 0xc1, 0xc9, 10000),
+ REGULATOR_LINEAR_RANGE(3200000, 0xca, 0xcf, 0),
+ REGULATOR_LINEAR_RANGE(3300000, 0xd0, 0xd9, 10000),
+ REGULATOR_LINEAR_RANGE(3400000, 0xda, 0xe0, 0),
+ REGULATOR_LINEAR_RANGE(3410000, 0xe1, 0xe9, 10000),
+ REGULATOR_LINEAR_RANGE(3500000, 0xea, 0xf0, 0),
+ REGULATOR_LINEAR_RANGE(3510000, 0xf1, 0xf9, 10000),
+ REGULATOR_LINEAR_RANGE(3600000, 0xfa, 0xff, 0),
+};
+
+static const struct linear_range ldo_vout_ranges3[] = {
+ REGULATOR_LINEAR_RANGE(2700000, 0x00, 0x09, 10000),
+ REGULATOR_LINEAR_RANGE(2800000, 0x0a, 0x10, 0),
+ REGULATOR_LINEAR_RANGE(2810000, 0x11, 0x19, 10000),
+ REGULATOR_LINEAR_RANGE(2900000, 0x1a, 0x20, 0),
+ REGULATOR_LINEAR_RANGE(2910000, 0x21, 0x29, 10000),
+ REGULATOR_LINEAR_RANGE(3000000, 0x2a, 0x30, 0),
+ REGULATOR_LINEAR_RANGE(3010000, 0x31, 0x39, 10000),
+ REGULATOR_LINEAR_RANGE(3100000, 0x3a, 0x40, 0),
+ REGULATOR_LINEAR_RANGE(3110000, 0x41, 0x49, 10000),
+ REGULATOR_LINEAR_RANGE(3200000, 0x4a, 0x4f, 0),
+ REGULATOR_LINEAR_RANGE(3300000, 0x50, 0x59, 10000),
+ REGULATOR_LINEAR_RANGE(3400000, 0x5a, 0x60, 0),
+ REGULATOR_LINEAR_RANGE(3410000, 0x61, 0x69, 10000),
+ REGULATOR_LINEAR_RANGE(3500000, 0x6a, 0x70, 0),
+ REGULATOR_LINEAR_RANGE(3510000, 0x71, 0x79, 10000),
+ REGULATOR_LINEAR_RANGE(3600000, 0x7a, 0x7f, 0),
+};
+
+static int mt6360_regulator_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ const struct mt6360_regulator_desc *rdesc = (struct mt6360_regulator_desc *)rdev->desc;
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ int shift = ffs(rdesc->mode_mask) - 1;
+ unsigned int val;
+ int ret;
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ val = MT6360_OPMODE_NORMAL;
+ break;
+ case REGULATOR_MODE_STANDBY:
+ val = MT6360_OPMODE_ULP;
+ break;
+ case REGULATOR_MODE_IDLE:
+ val = MT6360_OPMODE_LP;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(regmap, rdesc->mode_reg, rdesc->mode_mask, val << shift);
+ if (ret) {
+ dev_err(&rdev->dev, "%s: fail (%d)\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static unsigned int mt6360_regulator_get_mode(struct regulator_dev *rdev)
+{
+ const struct mt6360_regulator_desc *rdesc = (struct mt6360_regulator_desc *)rdev->desc;
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ int shift = ffs(rdesc->mode_mask) - 1;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(regmap, rdesc->mode_reg, &val);
+ if (ret)
+ return ret;
+
+ val &= rdesc->mode_mask;
+ val >>= shift;
+
+ switch (val) {
+ case MT6360_OPMODE_LP:
+ return REGULATOR_MODE_IDLE;
+ case MT6360_OPMODE_ULP:
+ return REGULATOR_MODE_STANDBY;
+ case MT6360_OPMODE_NORMAL:
+ return REGULATOR_MODE_NORMAL;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int mt6360_regulator_get_status(struct regulator_dev *rdev)
+{
+ const struct mt6360_regulator_desc *rdesc = (struct mt6360_regulator_desc *)rdev->desc;
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(regmap, rdesc->state_reg, &val);
+ if (ret)
+ return ret;
+
+ if (val & rdesc->state_mask)
+ return REGULATOR_STATUS_ON;
+
+ return REGULATOR_STATUS_OFF;
+}
+
+static const struct regulator_ops mt6360_regulator_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_mode = mt6360_regulator_set_mode,
+ .get_mode = mt6360_regulator_get_mode,
+ .get_status = mt6360_regulator_get_status,
+};
+
+static unsigned int mt6360_regulator_of_map_mode(unsigned int hw_mode)
+{
+ switch (hw_mode) {
+ case MT6360_OPMODE_NORMAL:
+ return REGULATOR_MODE_NORMAL;
+ case MT6360_OPMODE_LP:
+ return REGULATOR_MODE_IDLE;
+ case MT6360_OPMODE_ULP:
+ return REGULATOR_MODE_STANDBY;
+ default:
+ return REGULATOR_MODE_INVALID;
+ }
+}
+
+#define MT6360_REGULATOR_DESC(_name, _sname, ereg, emask, vreg, vmask, \
+ mreg, mmask, streg, stmask, vranges, \
+ vcnts, offon_delay, irq_tbls) \
+{ \
+ .desc = { \
+ .name = #_name, \
+ .supply_name = #_sname, \
+ .id = MT6360_REGULATOR_##_name, \
+ .of_match = of_match_ptr(#_name), \
+ .regulators_node = of_match_ptr("regulator"), \
+ .of_map_mode = mt6360_regulator_of_map_mode, \
+ .owner = THIS_MODULE, \
+ .ops = &mt6360_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .vsel_reg = vreg, \
+ .vsel_mask = vmask, \
+ .enable_reg = ereg, \
+ .enable_mask = emask, \
+ .linear_ranges = vranges, \
+ .n_linear_ranges = ARRAY_SIZE(vranges), \
+ .n_voltages = vcnts, \
+ .off_on_delay = offon_delay, \
+ }, \
+ .mode_reg = mreg, \
+ .mode_mask = mmask, \
+ .state_reg = streg, \
+ .state_mask = stmask, \
+ .irq_tables = irq_tbls, \
+ .irq_table_size = ARRAY_SIZE(irq_tbls), \
+}
+
+static const struct mt6360_regulator_desc mt6360_regulator_descs[] = {
+ MT6360_REGULATOR_DESC(BUCK1, BUCK1_VIN, 0x117, 0x40, 0x110, 0xff, 0x117, 0x30, 0x117, 0x04,
+ buck_vout_ranges, 256, 0, buck1_irq_tbls),
+ MT6360_REGULATOR_DESC(BUCK2, BUCK2_VIN, 0x127, 0x40, 0x120, 0xff, 0x127, 0x30, 0x127, 0x04,
+ buck_vout_ranges, 256, 0, buck2_irq_tbls),
+ MT6360_REGULATOR_DESC(LDO6, LDO_VIN3, 0x137, 0x40, 0x13B, 0xff, 0x137, 0x30, 0x137, 0x04,
+ ldo_vout_ranges1, 256, 0, ldo6_irq_tbls),
+ MT6360_REGULATOR_DESC(LDO7, LDO_VIN3, 0x131, 0x40, 0x135, 0xff, 0x131, 0x30, 0x131, 0x04,
+ ldo_vout_ranges1, 256, 0, ldo7_irq_tbls),
+ MT6360_REGULATOR_DESC(LDO1, LDO_VIN1, 0x217, 0x40, 0x21B, 0xff, 0x217, 0x30, 0x217, 0x04,
+ ldo_vout_ranges2, 256, 0, ldo1_irq_tbls),
+ MT6360_REGULATOR_DESC(LDO2, LDO_VIN1, 0x211, 0x40, 0x215, 0xff, 0x211, 0x30, 0x211, 0x04,
+ ldo_vout_ranges2, 256, 0, ldo2_irq_tbls),
+ MT6360_REGULATOR_DESC(LDO3, LDO_VIN1, 0x205, 0x40, 0x209, 0xff, 0x205, 0x30, 0x205, 0x04,
+ ldo_vout_ranges2, 256, 100, ldo3_irq_tbls),
+ MT6360_REGULATOR_DESC(LDO5, LDO_VIN2, 0x20B, 0x40, 0x20F, 0x7f, 0x20B, 0x30, 0x20B, 0x04,
+ ldo_vout_ranges3, 128, 100, ldo5_irq_tbls),
+};
+
+static int mt6360_regulator_irq_register(struct platform_device *pdev,
+ struct regulator_dev *rdev,
+ const struct mt6360_irq_mapping *tbls,
+ int tbl_size)
+{
+ int i, irq, ret;
+
+ for (i = 0; i < tbl_size; i++) {
+ const struct mt6360_irq_mapping *irq_desc = tbls + i;
+
+ irq = platform_get_irq_byname(pdev, irq_desc->name);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Fail to get %s irq\n", irq_desc->name);
+ return irq;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, irq_desc->handler, 0,
+ irq_desc->name, rdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Fail to request %s irq\n", irq_desc->name);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int mt6360_regulator_probe(struct platform_device *pdev)
+{
+ struct mt6360_regulator_data *mrd;
+ struct regulator_config config = {};
+ int i, ret;
+
+ mrd = devm_kzalloc(&pdev->dev, sizeof(*mrd), GFP_KERNEL);
+ if (!mrd)
+ return -ENOMEM;
+
+ mrd->dev = &pdev->dev;
+
+ mrd->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!mrd->regmap) {
+ dev_err(&pdev->dev, "Failed to get parent regmap\n");
+ return -ENODEV;
+ }
+
+ config.dev = pdev->dev.parent;
+ config.driver_data = mrd;
+ config.regmap = mrd->regmap;
+
+ for (i = 0; i < ARRAY_SIZE(mt6360_regulator_descs); i++) {
+ const struct mt6360_regulator_desc *rdesc = mt6360_regulator_descs + i;
+ struct regulator_dev *rdev;
+
+ rdev = devm_regulator_register(&pdev->dev, &rdesc->desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "Failed to register %d regulaotr\n", i);
+ return PTR_ERR(rdev);
+ }
+
+ ret = mt6360_regulator_irq_register(pdev, rdev, rdesc->irq_tables,
+ rdesc->irq_table_size);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register %d regulaotr irqs\n", i);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id mt6360_regulator_id_table[] = {
+ { "mt6360-regulator", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, mt6360_regulator_id_table);
+
+static struct platform_driver mt6360_regulator_driver = {
+ .driver = {
+ .name = "mt6360-regulator",
+ },
+ .probe = mt6360_regulator_probe,
+ .id_table = mt6360_regulator_id_table,
+};
+module_platform_driver(mt6360_regulator_driver);
+
+MODULE_AUTHOR("Gene Chen <gene_chen@richtek.com>");
+MODULE_DESCRIPTION("MT6360 Regulator Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/dt-bindings/regulator/mediatek,mt6360-regulator.h b/include/dt-bindings/regulator/mediatek,mt6360-regulator.h
new file mode 100644
index 0000000..21c75de
--- /dev/null
+++ b/include/dt-bindings/regulator/mediatek,mt6360-regulator.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __DT_BINDINGS_MEDIATEK_MT6360_REGULATOR_H__
+#define __DT_BINDINGS_MEDIATEK_MT6360_REGULATOR_H__
+
+/*
+ * BUCK/LDO mode constants which may be used in devicetree properties
+ * (eg. regulator-allowed-modes).
+ * See the manufacturer's datasheet for more information on these modes.
+ */
+
+#define MT6360_OPMODE_LP 2
+#define MT6360_OPMODE_ULP 3
+#define MT6360_OPMODE_NORMAL 0
+
+#endif
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v4 2/2] dt-bindings: regulator: mt6360: Add DT binding documentation
2020-08-26 10:49 [PATCH v4 0/2] regulator: mt6360: Add support for MT6360 regulator Gene Chen
2020-08-26 10:49 ` [PATCH v4 1/2] " Gene Chen
@ 2020-08-26 10:49 ` Gene Chen
2020-08-26 12:55 ` [PATCH v4 0/2] regulator: mt6360: Add support for MT6360 regulator Mark Brown
2 siblings, 0 replies; 4+ messages in thread
From: Gene Chen @ 2020-08-26 10:49 UTC (permalink / raw)
To: matthias.bgg, robh+dt
Cc: gene_chen, devicetree, lgirdwood, linux-kernel, cy_huang,
benjamin.chao, broonie, linux-mediatek, Wilma.Wu,
linux-arm-kernel, shufan_lee
From: Gene Chen <gene_chen@richtek.com>
Add a devicetree binding documentation for the mt6360 regulator driver.
Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
.../bindings/regulator/mt6360-regulator.yaml | 113 +++++++++++++++++++++
1 file changed, 113 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
diff --git a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
new file mode 100644
index 0000000..a462d99
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6360-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6360 Regulator from MediaTek Integrated
+
+maintainers:
+ - Gene Chen <gene_chen@richtek.com>
+
+description: |
+ list of regulators provided by this controller, must be named
+ after their hardware counterparts buck1/2 or ldo1/2/3/5/6/7
+
+properties:
+ compatible:
+ const: mediatek,mt6360-regulator
+
+ LDO_VIN1-supply:
+ description: Input supply phandle(s) for LDO1/2/3
+ LDO_VIN2-supply:
+ description: Input supply phandle(s) for LDO5
+ LDO_VIN3-supply:
+ description: Input supply phandle(s) for LDO6/7
+
+patternProperties:
+ "^buck[12]$":
+ $ref: "regulator.yaml#"
+
+ "^ldo[123567]$":
+ $ref: "regulator.yaml#"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+ regulator {
+ compatible = "mediatek,mt6360-regulator";
+ LDO_VIN3-supply = <&BUCK2>;
+ buck1 {
+ regulator-compatible = "BUCK1";
+ regulator-name = "mt6360,buck1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP
+ MT6360_OPMODE_ULP>;
+ };
+ BUCK2: buck2 {
+ regulator-compatible = "BUCK2";
+ regulator-name = "mt6360,buck2";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP
+ MT6360_OPMODE_ULP>;
+ };
+ ldo6 {
+ regulator-compatible = "LDO6";
+ regulator-name = "mt6360,ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo7 {
+ regulator-compatible = "LDO7";
+ regulator-name = "mt6360,ldo7";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo1 {
+ regulator-compatible = "LDO1";
+ regulator-name = "mt6360,ldo1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo2 {
+ regulator-compatible = "LDO2";
+ regulator-name = "mt6360,ldo2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo3 {
+ regulator-compatible = "LDO3";
+ regulator-name = "mt6360,ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo5 {
+ regulator-compatible = "LDO5";
+ regulator-name = "mt6360,ldo5";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ };
+...
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v4 0/2] regulator: mt6360: Add support for MT6360 regulator
2020-08-26 10:49 [PATCH v4 0/2] regulator: mt6360: Add support for MT6360 regulator Gene Chen
2020-08-26 10:49 ` [PATCH v4 1/2] " Gene Chen
2020-08-26 10:49 ` [PATCH v4 2/2] dt-bindings: regulator: mt6360: Add DT binding documentation Gene Chen
@ 2020-08-26 12:55 ` Mark Brown
2 siblings, 0 replies; 4+ messages in thread
From: Mark Brown @ 2020-08-26 12:55 UTC (permalink / raw)
To: Gene Chen, matthias.bgg, robh+dt
Cc: gene_chen, devicetree, linux-kernel, lgirdwood, cy_huang,
benjamin.chao, linux-mediatek, Wilma.Wu, linux-arm-kernel,
shufan_lee
On Wed, 26 Aug 2020 18:49:16 +0800, Gene Chen wrote:
> This patch series add MT6360 regulator support contains driver and binding document
>
> Gene Chen (2)
> regulator: mt6360: Add support for MT6360 regulator
> dt-bindings: regulator: mt6360: Add DT binding
>
> Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml | 113 ++
> drivers/regulator/Kconfig | 9
> drivers/regulator/Makefile | 1
> drivers/regulator/mt6360-regulator.c | 459 ++++++++++
> include/dt-bindings/regulator/mediatek,mt6360-regulator.h | 16
> 5 files changed, 598 insertions(+)
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/2] regulator: mt6360: Add support for MT6360 regulator
commit: d321571d5e4c2d5511b75e6cf1a910e0a0c2a2e9
[2/2] dt-bindings: regulator: mt6360: Add DT binding documentation
commit: 9b1d3422e16ffcd4dad7729459717b216490540d
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-08-26 12:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-26 10:49 [PATCH v4 0/2] regulator: mt6360: Add support for MT6360 regulator Gene Chen
2020-08-26 10:49 ` [PATCH v4 1/2] " Gene Chen
2020-08-26 10:49 ` [PATCH v4 2/2] dt-bindings: regulator: mt6360: Add DT binding documentation Gene Chen
2020-08-26 12:55 ` [PATCH v4 0/2] regulator: mt6360: Add support for MT6360 regulator Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).