* [PATCH] ARM: config: ux500: Update U8500 defconfig
@ 2020-11-05 13:45 Linus Walleij
2020-11-23 16:51 ` Arnd Bergmann
0 siblings, 1 reply; 3+ messages in thread
From: Linus Walleij @ 2020-11-05 13:45 UTC (permalink / raw)
To: arm, soc; +Cc: Linus Walleij, Stephan Gerhold, linux-arm-kernel
This updates the defconfig for the U8500 platform with
some of the changes from the v5.9 and v5.10 kernel
cycles:
- No need to select the schedutil cpufreq governor
because it is the default now.
- Enable the CY8CTMA140 touchscreen as used on the
Samsung Skomer GT-S7710.
- Enable the Samsung S6E63M0 DSI panel as used on
the Samsung Golden GT-I8810.
- Enable the KTD253 backlight as used on the Samsung
Skomer GT-S7710.
- Drop CONFIG_USB as we only use the gadget mode of
the MUSB driver.
- Add selection of the CONFIG_LEDS_LP55XX_COMMON
lest the LP5521 LEDs will not work.
- Move the config entry for CONFIG_DEBUG_FS.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/configs/u8500_defconfig | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 28dd7cf56048..bcedfe1422aa 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -12,7 +12,6 @@ CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPUFREQ_DT=y
CONFIG_CPU_IDLE=y
@@ -60,6 +59,7 @@ CONFIG_KEYBOARD_TC3589X=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_BU21013=y
+CONFIG_TOUCHSCREEN_CY8CTMA140=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AB8500_PONKEY=y
CONFIG_INPUT_GPIO_VIBRA=y
@@ -88,11 +88,13 @@ CONFIG_REGULATOR_GPIO=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
+CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
+CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y
CONFIG_DRM_PANEL_SONY_ACX424AKP=y
CONFIG_DRM_LIMA=y
CONFIG_DRM_MCDE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_LOGO=y
CONFIG_SOUND=y
@@ -100,7 +102,6 @@ CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_UX500=y
CONFIG_SND_SOC_UX500_MACH_MOP500=y
-CONFIG_USB=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_UX500=y
CONFIG_MUSB_PIO_ONLY=y
@@ -113,6 +114,7 @@ CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
@@ -153,8 +155,8 @@ CONFIG_CRYPTO_DEV_UX500_HASH=y
CONFIG_CRYPTO_DEV_UX500_DEBUG=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: config: ux500: Update U8500 defconfig
2020-11-05 13:45 [PATCH] ARM: config: ux500: Update U8500 defconfig Linus Walleij
@ 2020-11-23 16:51 ` Arnd Bergmann
0 siblings, 0 replies; 3+ messages in thread
From: Arnd Bergmann @ 2020-11-23 16:51 UTC (permalink / raw)
To: soc, Linus Walleij, arm; +Cc: Stephan Gerhold, linux-arm-kernel, Arnd Bergmann
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 5 Nov 2020 14:45:10 +0100, Linus Walleij wrote:
> This updates the defconfig for the U8500 platform with
> some of the changes from the v5.9 and v5.10 kernel
> cycles:
>
> - No need to select the schedutil cpufreq governor
> because it is the default now.
> - Enable the CY8CTMA140 touchscreen as used on the
> Samsung Skomer GT-S7710.
> - Enable the Samsung S6E63M0 DSI panel as used on
> the Samsung Golden GT-I8810.
> - Enable the KTD253 backlight as used on the Samsung
> Skomer GT-S7710.
> - Drop CONFIG_USB as we only use the gadget mode of
> the MUSB driver.
> - Add selection of the CONFIG_LEDS_LP55XX_COMMON
> lest the LP5521 LEDs will not work.
> - Move the config entry for CONFIG_DEBUG_FS.
Applied to arm/defconfig, thanks!
[1/1] ARM: config: ux500: Update U8500 defconfig
commit: a65183ff1535ed15c28c526f6b69ed03c21d34b4
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] ARM: config: ux500: Update U8500 defconfig
@ 2020-10-27 21:38 Linus Walleij
0 siblings, 0 replies; 3+ messages in thread
From: Linus Walleij @ 2020-10-27 21:38 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: Linus Walleij, Stephan Gerhold
This updates the defconfig for the U8500 platform with
some of the changes from the v5.9 and v5.10 kernel
cycles:
- No need to select the schedutil cpufreq governor
because it is the default now.
- Enable the CY8CTMA140 touchscreen as used on the
Samsung Skomer GT-S7710.
- Enable the Samsung S6E63M0 DSI panel as used on
the Samsung Golden GT-I8810.
- Enable the KTD253 backlight as used on the Samsung
Skomer GT-S7710.
- Drop CONFIG_USB as we only use the gadget mode of
the MUSB driver.
- Add selection of the CONFIG_LEDS_LP55XX_COMMON
lest the LP5521 LEDs will not work.
- Move the config entry for CONFIG_DEBUG_FS.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/configs/u8500_defconfig | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 28dd7cf56048..bcedfe1422aa 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -12,7 +12,6 @@ CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPUFREQ_DT=y
CONFIG_CPU_IDLE=y
@@ -60,6 +59,7 @@ CONFIG_KEYBOARD_TC3589X=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_BU21013=y
+CONFIG_TOUCHSCREEN_CY8CTMA140=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AB8500_PONKEY=y
CONFIG_INPUT_GPIO_VIBRA=y
@@ -88,11 +88,13 @@ CONFIG_REGULATOR_GPIO=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
+CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
+CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y
CONFIG_DRM_PANEL_SONY_ACX424AKP=y
CONFIG_DRM_LIMA=y
CONFIG_DRM_MCDE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_LOGO=y
CONFIG_SOUND=y
@@ -100,7 +102,6 @@ CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_UX500=y
CONFIG_SND_SOC_UX500_MACH_MOP500=y
-CONFIG_USB=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_UX500=y
CONFIG_MUSB_PIO_ONLY=y
@@ -113,6 +114,7 @@ CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
@@ -153,8 +155,8 @@ CONFIG_CRYPTO_DEV_UX500_HASH=y
CONFIG_CRYPTO_DEV_UX500_DEBUG=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-11-23 16:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-05 13:45 [PATCH] ARM: config: ux500: Update U8500 defconfig Linus Walleij
2020-11-23 16:51 ` Arnd Bergmann
-- strict thread matches above, loose matches on Subject: below --
2020-10-27 21:38 Linus Walleij
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).