linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Alain Volmat <alain.volmat@foss.st.com>
To: <broonie@kernel.org>, <amelie.delaunay@foss.st.com>
Cc: <mcoquelin.stm32@gmail.com>, <alexandre.torgue@foss.st.com>,
	<linux-spi@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <fabrice.gasnier@foss.st.com>,
	<alain.volmat@foss.st.com>
Subject: [PATCH v2 1/7] spi: stm32: fixes pm_runtime calls in probe/remove
Date: Wed, 7 Jul 2021 10:27:00 +0200	[thread overview]
Message-ID: <1625646426-5826-2-git-send-email-alain.volmat@foss.st.com> (raw)
In-Reply-To: <1625646426-5826-1-git-send-email-alain.volmat@foss.st.com>

Add pm_runtime calls in probe/probe error path and remove
in order to be consistent in all places in ordering and
ensure that pm_runtime is disabled prior to resources used
by the SPI controller.

This patch also fixes the 2 following warnings on driver remove:
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:594 clk_core_disable_lock+0x18/0x24
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:476 clk_unprepare+0x24/0x2c

Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support")

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
---
 drivers/spi/spi-stm32.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 8ffcffbb8157..a92a28933edb 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1925,6 +1925,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
 		master->can_dma = stm32_spi_can_dma;
 
 	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
 	ret = spi_register_master(master);
@@ -1940,6 +1941,8 @@ static int stm32_spi_probe(struct platform_device *pdev)
 
 err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 err_dma_release:
 	if (spi->dma_tx)
 		dma_release_channel(spi->dma_tx);
@@ -1956,9 +1959,14 @@ static int stm32_spi_remove(struct platform_device *pdev)
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct stm32_spi *spi = spi_master_get_devdata(master);
 
+	pm_runtime_get_sync(&pdev->dev);
+
 	spi_unregister_master(master);
 	spi->cfg->disable(spi);
 
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 	if (master->dma_tx)
 		dma_release_channel(master->dma_tx);
 	if (master->dma_rx)
@@ -1966,7 +1974,6 @@ static int stm32_spi_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(spi->clk);
 
-	pm_runtime_disable(&pdev->dev);
 
 	pinctrl_pm_select_sleep_state(&pdev->dev);
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-07-07  8:30 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-07  8:26 [PATCH v2 0/7] spi: stm32: various fixes & cleanup Alain Volmat
2021-07-07  8:27 ` Alain Volmat [this message]
2021-07-07  8:27 ` [PATCH v2 2/7] spi: stm32: enable pm_runtime autosuspend Alain Volmat
2021-07-07  8:27 ` [PATCH v2 3/7] spi: stm32h7: fix full duplex irq handler handling Alain Volmat
2021-07-07  8:27 ` [PATCH v2 4/7] spi: stm32: Revert "properly handle 0 byte transfer" Alain Volmat
2021-07-07  8:27 ` [PATCH v2 5/7] spi: stm32h7: rework rx fifo read function Alain Volmat
2021-07-07  8:27 ` [PATCH v2 6/7] spi: stm32h7: don't wait for EOT and flush fifo on disable Alain Volmat
2021-07-07  8:27 ` [PATCH v2 7/7] spi: stm32: finalize message either on dma callback or EOT Alain Volmat
2021-07-12 10:45 ` (subset) [PATCH v2 0/7] spi: stm32: various fixes & cleanup Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1625646426-5826-2-git-send-email-alain.volmat@foss.st.com \
    --to=alain.volmat@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=amelie.delaunay@foss.st.com \
    --cc=broonie@kernel.org \
    --cc=fabrice.gasnier@foss.st.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).