[PATCH v7 0/8] Add MediaTek MT6357 PMIC support

[PATCH v7 0/8] Add MediaTek MT6357 PMIC support

[Alexandre Mergnat]

Hi,
This patch series adds MFD, PMIC keys, and regulator support for MT6357.
MT6357 is a MediaTek PMIC very similar to MT6358.

Currently, MTK bindings related to the PMICs are not converted yet (still .txt):

soc/mediatek/pwrap.txt (all PMIC parent)
      |
      V
mfd/mt6397.txt (support lot of mt63XX PMIC)
      +---------------+----------------+---...
      V               V                V
regulator/...      rtc/...          codec/...

1) Convert pwrap to yaml is ok.

2) For the PMIC bindings, there are two option:
- Convert mt6397.txt to mediatek,mt6397.yaml and continue to support multiple
  PMIC with only one file. IMO, the file will be hard to read because
  the supported features aren't the same for each PMIC.

- Make a binding file for each PMIC ref:
    - mfd/mediatek,mt6357.yaml
    - mfd/mediatek,mt6358.yaml
    - ...

3) All PMIC daughter bindings (regulator, rtc, codec, led, ...) aren't fully
converted yet. Refering to the two PMIC convertion options above:
- To be clean, all daughter bindings should be converted. This is hard because
  a good understanding of each device is requiered to write efficient bindings.
- Only daughter bindings supported by the added PMIC should be converted, that
  allows to do the task conversion step by step.

In the V4 of this serie, I chose the second option.

Regards,
Alex

Changes in v7:
- Drop mt6397 RTC schema conversion.
- Integrate mt6357 RTC schema directly in mediatek,mt6357.yaml.
- Fix unit address in mediatek,pwrap.yaml.
- Link to v6: https://lore.kernel.org/r/20221005-mt6357-support-v6-0-4f589756befa@baylibre.com

Changes in v6:
- Fix typo in documentations.
- Remove mediatek,mt6397-rtc.yaml example.
- Align pwrap convertion with the original .txt file.
- Remove unecessary include in the mt6357-regulator driver.
- Link to v5: https://lore.kernel.org/r/20221005-mt6357-support-v5-0-8210d955dd3d@baylibre.com

Changes in v5:
- Add missing maintainers
- Improve RTC binding by adding rtc.yaml ref and start-year property
- Split the txt->yaml conversion in one commit and the addition of the
  new mt6357-rtc compatible in another commit.
- Improve PWRAP binding:
  - clocks and clock-name have been refactored.
  - reset-names is now properly dependent to resets.
  - additionalProperties change from true to false.
  - change example for a most recent and popular SoC.
  - "allOf" part has been simplified.
- Pass binding tests with the updated tools. Here the command:
  "make DT_CHECKER_FLAGS=-m dt_binding_check"
- Link to v4: https://lore.kernel.org/r/20221005-mt6357-support-v4-0-5d2bb58e6087@baylibre.com

Changes in v4:
- "dt-bindings: mfd: mt6397: add binding for MT6357" has been applied
  by Lee Jones
- All fixed regulator are now refering to fixed-regulator.yaml
- vfe28 and vcamio18 regulators have been added
- pwrap binding has been converted and mt8365 support has been added
- mt6357 PMIC binding has been created
- mt6397 RTC binding has been converted and mt6357 support has been added
- Link to v3: https://lore.kernel.org/r/20221005-mt6357-support-v3-0-7e0bd7c315b2@baylibre.com

Changes in v3:
- To be consistent with regulator/driver.h and helper.c, shift
  variables have been removed and the mask values have been directly shifted.
- Remove index tables and rework volt tables to use set/get helper functions.
- Add comment to structure and function.
- Fix Fabien Parent mail address.
- Link to v2: https://lore.kernel.org/r/20221005-mt6357-support-v2-0-f17ba2d2d0a9@baylibre.com

Changes in v2:
- Rebase
- Fix typo
- Remove dependencies with https://lore.kernel.org/all/20220415153629.1817202-1-fparent@baylibre.com/
  which is no longer relevant.

Previous versions:
v1 - https://lore.kernel.org/all/20220531124959.202787-1-fparent@baylibre.com/

To: Lee Jones <lee@kernel.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Matthias Brugger <matthias.bgg@gmail.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Chen Zhong <chen.zhong@mediatek.com>
To: Liam Girdwood <lgirdwood@gmail.com>
To: Mark Brown <broonie@kernel.org>
To: Fabien Parent <fabien.parent@linaro.org>
To: Alessandro Zummo <a.zummo@towertech.it>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Sean Wang <sean.wang@mediatek.com>
To: Pavel Machek <pavel@ucw.cz>
To: Tianping Fang <tianping.fang@mediatek.com>
To: Flora Fu <flora.fu@mediatek.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: Fabien Parent <fparent@baylibre.com>
Cc: Rob Herring <robh@kernel.org>
Cc: linux-rtc@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>

---
Alexandre Mergnat (4):
      dt-bindings: soc: mediatek: convert pwrap documentation
      dt-bindings: mfd: mediatek: Add bindings for MT6357 PMIC
      arm64: dts: mt6358: change node names
      arm64: dts: mt8173: change node name

Fabien Parent (4):
      dt-bindings: input: mtk-pmic-keys: add binding for MT6357 PMIC
      regulator: dt-bindings: Add binding schema for mt6357 regulators
      regulator: add mt6357 regulator
      Input: mtk-pmic-keys: add MT6357 support

 .../bindings/input/mediatek,pmic-keys.yaml         |   1 +
 .../devicetree/bindings/leds/leds-mt6323.txt       |   2 +-
 .../devicetree/bindings/mfd/mediatek,mt6357.yaml   | 111 +++++
 Documentation/devicetree/bindings/mfd/mt6397.txt   |   2 +-
 .../regulator/mediatek,mt6357-regulator.yaml       | 294 +++++++++++++
 .../bindings/soc/mediatek/mediatek,pwrap.yaml      | 147 +++++++
 .../devicetree/bindings/soc/mediatek/pwrap.txt     |  75 ----
 arch/arm64/boot/dts/mediatek/mt6358.dtsi           |   6 +-
 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi       |   2 +-
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts        |   2 +-
 drivers/input/keyboard/mtk-pmic-keys.c             |  17 +
 drivers/regulator/Kconfig                          |   9 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/mt6357-regulator.c               | 453 +++++++++++++++++++++
 include/linux/regulator/mt6357-regulator.h         |  51 +++
 15 files changed, 1091 insertions(+), 82 deletions(-)
---
base-commit: f6e37bb630736d880a319b7845e8837c8536dd59
change-id: 20221005-mt6357-support-55308b82e33f

Best regards,
-- 
Alexandre Mergnat <amergnat@baylibre.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 1/8] dt-bindings: input: mtk-pmic-keys: add binding for MT6357 PMIC

[Alexandre Mergnat]

From: Fabien Parent <fparent@baylibre.com>

Add binding documentation for the PMIC keys on MT6357.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
index 2f72ec418415..037c3ae9f1c3 100644
--- a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
+++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -26,6 +26,7 @@ properties:
     enum:
       - mediatek,mt6323-keys
       - mediatek,mt6331-keys
+      - mediatek,mt6357-keys
       - mediatek,mt6358-keys
       - mediatek,mt6397-keys
 

-- 
b4 0.10.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 2/8] regulator: dt-bindings: Add binding schema for mt6357 regulators

[Alexandre Mergnat]

From: Fabien Parent <fparent@baylibre.com>

Add YAML schema for the MediaTek MT6357 regulators.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 .../regulator/mediatek,mt6357-regulator.yaml       | 294 +++++++++++++++++++++
 1 file changed, 294 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
new file mode 100644
index 000000000000..6327bb2f6ee0
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
@@ -0,0 +1,294 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6357-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6357 Regulators
+
+maintainers:
+  - Chen Zhong <chen.zhong@mediatek.com>
+  - Fabien Parent <fabien.parent@linaro.org>
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+description: |
+  The MT6357 PMIC provides 5 BUCK and 29 LDO.
+  Regulators and nodes are named according to the regulator type:
+  - buck-<name>
+  - ldo-<name>.
+  MT6357 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck-v(core|modem|pa|proc|s1)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+
+  "^ldo-v(camio18|aud28|aux18|io18|io28|rf12|rf18|cn18|cn28|fe28)$":
+    type: object
+    $ref: fixed-regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single fixed LDO regulator.
+
+    required:
+      - regulator-name
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+
+  "^ldo-v(efuse|ibr|ldo28|mch|cama|camd|cn33-bt|cn33-wifi)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+
+  "^ldo-v(xo22|emc|mc|sim1|sim2|sram-others|sram-proc|dram|usb33)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6357_vproc_reg: buck-vproc {
+          regulator-name = "vproc";
+          regulator-min-microvolt = <518750>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <220>;
+          regulator-always-on;
+        };
+        mt6357_vcore_reg: buck-vcore {
+          regulator-name = "vcore";
+          regulator-min-microvolt = <518750>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <220>;
+          regulator-always-on;
+        };
+        mt6357_vmodem_reg: buck-vmodem {
+          regulator-name = "vmodem";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <220>;
+        };
+        mt6357_vs1_reg: buck-vs1 {
+          regulator-name = "vs1";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <2200000>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <220>;
+          regulator-always-on;
+        };
+        mt6357_vpa_reg: buck-vpa {
+          regulator-name = "vpa";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <3650000>;
+          regulator-ramp-delay = <50000>;
+          regulator-enable-ramp-delay = <220>;
+        };
+        mt6357_vfe28_reg: ldo-vfe28 {
+          compatible = "regulator-fixed";
+          regulator-name = "vfe28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vxo22_reg: ldo-vxo22 {
+          regulator-name = "vxo22";
+          regulator-min-microvolt = <2200000>;
+          regulator-max-microvolt = <2400000>;
+          regulator-enable-ramp-delay = <110>;
+        };
+        mt6357_vrf18_reg: ldo-vrf18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vrf18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <110>;
+        };
+        mt6357_vrf12_reg: ldo-vrf12 {
+          compatible = "regulator-fixed";
+          regulator-name = "vrf12";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1200000>;
+          regulator-enable-ramp-delay = <110>;
+        };
+        mt6357_vefuse_reg: ldo-vefuse {
+          regulator-name = "vefuse";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcn33_bt_reg: ldo-vcn33-bt {
+          regulator-name = "vcn33-bt";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3500000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcn33_wifi_reg: ldo-vcn33-wifi {
+          regulator-name = "vcn33-wifi";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3500000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcn28_reg: ldo-vcn28 {
+          compatible = "regulator-fixed";
+          regulator-name = "vcn28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcn18_reg: ldo-vcn18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vcn18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcama_reg: ldo-vcama {
+          regulator-name = "vcama";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcamd_reg: ldo-vcamd {
+          regulator-name = "vcamd";
+          regulator-min-microvolt = <1000000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcamio_reg: ldo-vcamio18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vcamio";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vldo28_reg: ldo-vldo28 {
+          regulator-name = "vldo28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vsram_others_reg: ldo-vsram-others {
+          regulator-name = "vsram-others";
+          regulator-min-microvolt = <518750>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <110>;
+          regulator-always-on;
+        };
+        mt6357_vsram_proc_reg: ldo-vsram-proc {
+          regulator-name = "vsram-proc";
+          regulator-min-microvolt = <518750>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <110>;
+          regulator-always-on;
+        };
+        mt6357_vaux18_reg: ldo-vaux18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vaux18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vaud28_reg: ldo-vaud28 {
+          compatible = "regulator-fixed";
+          regulator-name = "vaud28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vio28_reg: ldo-vio28 {
+          compatible = "regulator-fixed";
+          regulator-name = "vio28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vio18_reg: ldo-vio18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vio18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+          regulator-always-on;
+        };
+        mt6357_vdram_reg: ldo-vdram {
+          regulator-name = "vdram";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1200000>;
+          regulator-enable-ramp-delay = <3300>;
+        };
+        mt6357_vmc_reg: ldo-vmc {
+          regulator-name = "vmc";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <44>;
+        };
+        mt6357_vmch_reg: ldo-vmch {
+          regulator-name = "vmch";
+          regulator-min-microvolt = <2900000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <44>;
+        };
+        mt6357_vemc_reg: ldo-vemc {
+          regulator-name = "vemc";
+          regulator-min-microvolt = <2900000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <44>;
+          regulator-always-on;
+        };
+        mt6357_vsim1_reg: ldo-vsim1 {
+          regulator-name = "vsim1";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vsim2_reg: ldo-vsim2 {
+          regulator-name = "vsim2";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vibr_reg: ldo-vibr {
+          regulator-name = "vibr";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <44>;
+        };
+        mt6357_vusb33_reg: ldo-vusb33 {
+          regulator-name = "vusb33";
+          regulator-min-microvolt = <3000000>;
+          regulator-max-microvolt = <3100000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+      };
+    };
+...

-- 
b4 0.10.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 3/8] dt-bindings: soc: mediatek: convert pwrap documentation

[Alexandre Mergnat]

- Convert soc/mediatek/pwrap.txt to soc/mediatek/mediatek,pwrap.yaml
- Add syscon compatible const for mt8186 and mt8195 to match the DTS needs,
  which is missing from pwrap.txt.

Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 .../devicetree/bindings/leds/leds-mt6323.txt       |   2 +-
 Documentation/devicetree/bindings/mfd/mt6397.txt   |   2 +-
 .../bindings/soc/mediatek/mediatek,pwrap.yaml      | 147 +++++++++++++++++++++
 .../devicetree/bindings/soc/mediatek/pwrap.txt     |  75 -----------
 4 files changed, 149 insertions(+), 77 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
index 45bf9f7d85f3..73353692efa1 100644
--- a/Documentation/devicetree/bindings/leds/leds-mt6323.txt
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -9,7 +9,7 @@ MT6323 PMIC hardware.
 For MT6323 MFD bindings see:
 Documentation/devicetree/bindings/mfd/mt6397.txt
 For MediaTek PMIC wrapper bindings see:
-Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
 
 Required properties:
 - compatible : Must be "mediatek,mt6323-led"
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 0088442efca1..33b3d39d4ddd 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -13,7 +13,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
 See the following for pwarp node definitions:
-../soc/mediatek/pwrap.txt
+../soc/mediatek/mediatek,pwrap.yaml
 
 This document describes the binding for MFD device and its sub module.
 
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
new file mode 100644
index 000000000000..3fefd634bc69
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,pwrap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek PMIC Wrapper
+
+maintainers:
+  - Flora Fu <flora.fu@mediatek.com>
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+description:
+  On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
+  is not directly visible to the CPU, but only through the PMIC wrapper
+  inside the SoC. The communication between the SoC and the PMIC can
+  optionally be encrypted. Also a non standard Dual IO SPI mode can be
+  used to increase speed.
+
+  IP Pairing
+
+  On MT8135 the pins of some SoC internal peripherals can be on the PMIC.
+  The signals of these pins are routed over the SPI bus using the pwrap
+  bridge. In the binding description below the properties needed for bridging
+  are marked with "IP Pairing". These are optional on SoCs which do not support
+  IP Pairing
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-pwrap
+              - mediatek,mt6765-pwrap
+              - mediatek,mt6779-pwrap
+              - mediatek,mt6797-pwrap
+              - mediatek,mt6873-pwrap
+              - mediatek,mt7622-pwrap
+              - mediatek,mt8135-pwrap
+              - mediatek,mt8173-pwrap
+              - mediatek,mt8183-pwrap
+              - mediatek,mt8186-pwrap
+              - mediatek,mt8188-pwrap
+              - mediatek,mt8195-pwrap
+              - mediatek,mt8365-pwrap
+              - mediatek,mt8516-pwrap
+      - items:
+          - enum:
+              - mediatek,mt8186-pwrap
+              - mediatek,mt8195-pwrap
+          - const: syscon
+
+  reg:
+    minItems: 1
+    items:
+      - description: PMIC wrapper registers
+      - description: IP pairing registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: pwrap
+      - const: pwrap-bridge
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: SPI bus clock
+      - description: Main module clock
+      - description: System module clock
+      - description: Timer module clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: spi
+      - const: wrap
+      - const: sys
+      - const: tmr
+
+  resets:
+    minItems: 1
+    items:
+      - description: PMIC wrapper reset
+      - description: IP pairing reset
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: pwrap
+      - const: pwrap-bridge
+
+  pmic:
+    type: object
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+dependentRequired:
+  resets: [reset-names]
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8365-pwrap
+    then:
+      properties:
+        clocks:
+          minItems: 4
+
+        clock-names:
+          minItems: 4
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/mt8135-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pwrap@1000f000 {
+            compatible = "mediatek,mt8135-pwrap";
+            reg = <0 0x1000f000 0 0x1000>,
+                  <0 0x11017000 0 0x1000>;
+            reg-names = "pwrap", "pwrap-bridge";
+            interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk26m>, <&clk26m>;
+            clock-names = "spi", "wrap";
+            resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+                     <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+            reset-names = "pwrap", "pwrap-bridge";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
deleted file mode 100644
index 8424b93c432e..000000000000
--- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-MediaTek PMIC Wrapper Driver
-
-This document describes the binding for the MediaTek PMIC wrapper.
-
-On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
-is not directly visible to the CPU, but only through the PMIC wrapper
-inside the SoC. The communication between the SoC and the PMIC can
-optionally be encrypted. Also a non standard Dual IO SPI mode can be
-used to increase speed.
-
-IP Pairing
-
-on MT8135 the pins of some SoC internal peripherals can be on the PMIC.
-The signals of these pins are routed over the SPI bus using the pwrap
-bridge. In the binding description below the properties needed for bridging
-are marked with "IP Pairing". These are optional on SoCs which do not support
-IP Pairing
-
-Required properties in pwrap device node.
-- compatible:
-	"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
-	"mediatek,mt6765-pwrap" for MT6765 SoCs
-	"mediatek,mt6779-pwrap" for MT6779 SoCs
-	"mediatek,mt6797-pwrap" for MT6797 SoCs
-	"mediatek,mt6873-pwrap" for MT6873/8192 SoCs
-	"mediatek,mt7622-pwrap" for MT7622 SoCs
-	"mediatek,mt8135-pwrap" for MT8135 SoCs
-	"mediatek,mt8173-pwrap" for MT8173 SoCs
-	"mediatek,mt8183-pwrap" for MT8183 SoCs
-	"mediatek,mt8186-pwrap" for MT8186 SoCs
-	"mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap" for MT8188 SoCs
-	"mediatek,mt8195-pwrap" for MT8195 SoCs
-	"mediatek,mt8365-pwrap" for MT8365 SoCs
-	"mediatek,mt8516-pwrap" for MT8516 SoCs
-- interrupts: IRQ for pwrap in SOC
-- reg-names: "pwrap" is required; "pwrap-bridge" is optional.
-  "pwrap": Main registers base
-  "pwrap-bridge": bridge base (IP Pairing)
-- reg: Must contain an entry for each entry in reg-names.
-- clock-names: Must include the following entries:
-  "spi": SPI bus clock
-  "wrap": Main module clock
-  "sys": System module clock (for MT8365 SoC)
-  "tmr": Timer module clock (for MT8365 SoC)
-- clocks: Must contain an entry for each entry in clock-names.
-
-Optional properities:
-- reset-names: Some SoCs include the following entries:
-  "pwrap"
-  "pwrap-bridge" (IP Pairing)
-- resets: Must contain an entry for each entry in reset-names.
-- pmic: Using either MediaTek PMIC MFD as the child device of pwrap
-  See the following for child node definitions:
-  Documentation/devicetree/bindings/mfd/mt6397.txt
-  or the regulator-only device as the child device of pwrap, such as MT6380.
-  See the following definitions for such kinds of devices.
-  Documentation/devicetree/bindings/regulator/mt6380-regulator.txt
-
-Example:
-	pwrap: pwrap@1000f000 {
-		compatible = "mediatek,mt8135-pwrap";
-		reg = <0 0x1000f000 0 0x1000>,
-			<0 0x11017000 0 0x1000>;
-		reg-names = "pwrap", "pwrap-bridge";
-		interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
-		resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
-				<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
-		reset-names = "pwrap", "pwrap-bridge";
-		clocks = <&clk26m>, <&clk26m>;
-		clock-names = "spi", "wrap";
-
-		pmic {
-			compatible = "mediatek,mt6397";
-		};
-	};

-- 
b4 0.10.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 4/8] dt-bindings: mfd: mediatek: Add bindings for MT6357 PMIC

[Alexandre Mergnat]

Currently, almost all MT63XX PMIC are documented mfd/mt6397.txt.
Unfortunately, the PMICs haven't always similar HW sub-features.
To have a better human readable schema, I chose to make one PMIC schema
to match the exact HW capabilities instead of convert mt6397.txt to
mediatek,mt63xx.yaml and put a bunch of properties behind
"if contain ... then ..."

- add interrupt property
- change property refs to match with new yaml documentation

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 .../devicetree/bindings/mfd/mediatek,mt6357.yaml   | 111 +++++++++++++++++++++
 1 file changed, 111 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
new file mode 100644
index 000000000000..837a77013d57
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6357.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6357 PMIC
+
+maintainers:
+  - Flora Fu <flora.fu@mediatek.com>
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+description: |
+  MT6357 is a power management system chip containing 5 buck
+  converters and 29 LDOs. Supported features are audio codec,
+  USB battery charging, fuel gauge, RTC
+
+  This is a multifunction device with the following sub modules:
+  - Regulator
+  - RTC
+  - Keys
+
+  It is interfaced to host controller using SPI interface by a proprietary hardware
+  called PMIC wrapper or pwrap. This MFD is a child device of pwrap.
+  See the following for pwrap node definitions:
+  Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
+
+properties:
+  compatible:
+    const: mediatek,mt6357
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  regulators:
+    type: object
+    $ref: /schemas/regulator/mediatek,mt6357-regulator.yaml
+    description:
+      List of MT6357 BUCKs and LDOs regulators.
+
+  rtc:
+    type: object
+    $ref: /schemas/rtc/rtc.yaml#
+    description:
+      MT6357 Real Time Clock.
+    properties:
+      compatible:
+        const: mediatek,mt6357-rtc
+      start-year: true
+    required:
+      - compatible
+
+  keys:
+    type: object
+    $ref: /schemas/input/mediatek,pmic-keys.yaml
+    description:
+      MT6357 power and home keys.
+
+required:
+  - compatible
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pwrap {
+        pmic {
+            compatible = "mediatek,mt6357";
+
+            interrupt-parent = <&pio>;
+            interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+
+            regulators {
+                mt6357_vproc_reg: buck-vproc {
+                    regulator-name = "vproc";
+                    regulator-min-microvolt = <518750>;
+                    regulator-max-microvolt = <1312500>;
+                    regulator-ramp-delay = <6250>;
+                    regulator-enable-ramp-delay = <220>;
+                    regulator-always-on;
+                };
+
+                // ...
+
+                mt6357_vusb33_reg: ldo-vusb33 {
+                    regulator-name = "vusb33";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3100000>;
+                    regulator-enable-ramp-delay = <264>;
+                };
+            };
+
+            rtc {
+                compatible = "mediatek,mt6357-rtc";
+            };
+
+            keys {
+                compatible = "mediatek,mt6357-keys";
+            };
+        };
+    };

-- 
b4 0.10.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 5/8] arm64: dts: mt6358: change node names

[Alexandre Mergnat]

- Change the node name from "mt6358" to "pmic", "mt6358rtc" to "rtc" and
"mt6358keys" to "keys" to be consistent with the generic names recommendation.

Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt6358.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
index 98f3b0e0c9f6..b605313bed99 100644
--- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -5,7 +5,7 @@
 #include <dt-bindings/input/input.h>
 
 &pwrap {
-	pmic: mt6358 {
+	pmic: pmic {
 		compatible = "mediatek,mt6358";
 		interrupt-controller;
 		interrupt-parent = <&pio>;
@@ -355,11 +355,11 @@ mt6358_vsim2_reg: ldo_vsim2 {
 			};
 		};
 
-		mt6358rtc: mt6358rtc {
+		mt6358rtc: rtc {
 			compatible = "mediatek,mt6358-rtc";
 		};
 
-		mt6358keys: mt6358keys {
+		mt6358keys: keys {
 			compatible = "mediatek,mt6358-keys";
 			power {
 				linux,keycodes = <KEY_POWER>;

-- 
b4 0.10.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 6/8] arm64: dts: mt8173: change node name

[Alexandre Mergnat]

- Change the node name from "mt6397" to "pmic" to be consistent
with the generic names recommendation.

Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 2 +-
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index e21feb85d822..a8f5c48e1782 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -913,7 +913,7 @@ &pwm0 {
 };
 
 &pwrap {
-	pmic: mt6397 {
+	pmic: pmic {
 		compatible = "mediatek,mt6397";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 0b5f154007be..755df5694234 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -300,7 +300,7 @@ &pwrap {
 	/* Only MT8173 E1 needs USB power domain */
 	power-domains = <&spm MT8173_POWER_DOMAIN_USB>;
 
-	pmic: mt6397 {
+	pmic: pmic {
 		compatible = "mediatek,mt6397";
 		interrupt-parent = <&pio>;
 		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;

-- 
b4 0.10.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 7/8] regulator: add mt6357 regulator

[Alexandre Mergnat]

From: Fabien Parent <fparent@baylibre.com>

Add regulator driver for the MT6357 PMIC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 drivers/regulator/Kconfig                  |   9 +
 drivers/regulator/Makefile                 |   1 +
 drivers/regulator/mt6357-regulator.c       | 453 +++++++++++++++++++++++++++++
 include/linux/regulator/mt6357-regulator.h |  51 ++++
 4 files changed, 514 insertions(+)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 070e4403c6c2..a659a57438f4 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -805,6 +805,15 @@ config REGULATOR_MT6332
 	  This driver supports the control of different power rails of device
 	  through regulator interface
 
+config REGULATOR_MT6357
+	tristate "MediaTek MT6357 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6357 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6358
 	tristate "MediaTek MT6358 PMIC"
 	depends on MFD_MT6397
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 5962307e1130..e4d67b7b1af6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -97,6 +97,7 @@ obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6331)	+= mt6331-regulator.o
 obj-$(CONFIG_REGULATOR_MT6332)	+= mt6332-regulator.o
+obj-$(CONFIG_REGULATOR_MT6357)	+= mt6357-regulator.o
 obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
 obj-$(CONFIG_REGULATOR_MT6359)	+= mt6359-regulator.o
 obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
diff --git a/drivers/regulator/mt6357-regulator.c b/drivers/regulator/mt6357-regulator.c
new file mode 100644
index 000000000000..b2352b96aed2
--- /dev/null
+++ b/drivers/regulator/mt6357-regulator.c
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2022 MediaTek Inc.
+// Copyright (c) 2022 BayLibre, SAS.
+// Author: Chen Zhong <chen.zhong@mediatek.com>
+// Author: Fabien Parent <fparent@baylibre.com>
+// Author: Alexandre Mergnat <amergnat@baylibre.com>
+//
+// Based on mt6397-regulator.c
+//
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6357/registers.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6357-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+/*
+ * MT6357 regulators' information
+ *
+ * @desc: standard fields of regulator description.
+ * @da_vsel_reg: Monitor register for query buck's voltage.
+ * @da_vsel_mask: Mask for query buck's voltage.
+ */
+struct mt6357_regulator_info {
+	struct regulator_desc desc;
+	u32 da_vsel_reg;
+	u32 da_vsel_mask;
+};
+
+#define MT6357_BUCK(match, vreg, min, max, step,		\
+	volt_ranges, vosel_reg, vosel_mask, _da_vsel_mask)	\
+[MT6357_ID_##vreg] = {		\
+	.desc = {		\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),		\
+		.regulators_node = "regulators",		\
+		.ops = &mt6357_volt_range_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6357_ID_##vreg,		\
+		.owner = THIS_MODULE,		\
+		.n_voltages = ((max) - (min)) / (step) + 1,	\
+		.linear_ranges = volt_ranges,			\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),	\
+		.vsel_reg = vosel_reg,		\
+		.vsel_mask = vosel_mask,	\
+		.enable_reg = MT6357_BUCK_##vreg##_CON0,	\
+		.enable_mask = BIT(0),		\
+	},	\
+	.da_vsel_reg = MT6357_BUCK_##vreg##_DBG0,		\
+	.da_vsel_mask = vosel_mask,		\
+}
+
+#define MT6357_LDO(match, vreg, ldo_volt_table,	\
+	enreg, vosel, vosel_mask)		\
+[MT6357_ID_##vreg] = {		\
+	.desc = {		\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),		\
+		.regulators_node = "regulators",		\
+		.ops = &mt6357_volt_table_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6357_ID_##vreg,		\
+		.owner = THIS_MODULE,		\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),	\
+		.volt_table = ldo_volt_table,	\
+		.vsel_reg = vosel,		\
+		.vsel_mask = vosel_mask,	\
+		.enable_reg = enreg,		\
+		.enable_mask = BIT(0),		\
+	},	\
+}
+
+#define MT6357_LDO1(match, vreg, min, max, step, volt_ranges,	\
+	enreg, vosel, vosel_mask)		\
+[MT6357_ID_##vreg] = {		\
+	.desc = {		\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),		\
+		.regulators_node = "regulators",		\
+		.ops = &mt6357_volt_range_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6357_ID_##vreg,		\
+		.owner = THIS_MODULE,		\
+		.n_voltages = ((max) - (min)) / (step) + 1,	\
+		.linear_ranges = volt_ranges,	\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),	\
+		.vsel_reg = vosel,		\
+		.vsel_mask = vosel_mask,	\
+		.enable_reg = enreg,		\
+		.enable_mask = BIT(0),		\
+	},	\
+	.da_vsel_reg = MT6357_LDO_##vreg##_DBG0,		\
+	.da_vsel_mask = 0x7f00,	\
+}
+
+#define MT6357_REG_FIXED(match, vreg, volt)	\
+[MT6357_ID_##vreg] = {					\
+	.desc = {					\
+		.name = #vreg,				\
+		.of_match = of_match_ptr(match),	\
+		.regulators_node = "regulators",	\
+		.ops = &mt6357_volt_fixed_ops,		\
+		.type = REGULATOR_VOLTAGE,		\
+		.id = MT6357_ID_##vreg,			\
+		.owner = THIS_MODULE,			\
+		.n_voltages = 1,			\
+		.enable_reg = MT6357_LDO_##vreg##_CON0,	\
+		.enable_mask = BIT(0),			\
+		.min_uV = volt,				\
+	},						\
+}
+
+/**
+ * mt6357_get_buck_voltage_sel - get_voltage_sel for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * da_vsel_reg and da_vsel_mask fields in the info structure and
+ * then use this as their get_voltage_vsel operation.
+ */
+static int mt6357_get_buck_voltage_sel(struct regulator_dev *rdev)
+{
+	int ret, regval;
+	struct mt6357_regulator_info *info = rdev_get_drvdata(rdev);
+
+	ret = regmap_read(rdev->regmap, info->da_vsel_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev,
+			"Failed to get mt6357 Buck %s vsel reg: %d\n",
+			info->desc.name, ret);
+		return ret;
+	}
+
+	regval &= info->da_vsel_mask;
+	regval >>= ffs(info->da_vsel_mask) - 1;
+
+	return regval;
+}
+
+static const struct regulator_ops mt6357_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = mt6357_get_buck_voltage_sel,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops mt6357_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops mt6357_volt_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static const int vxo22_voltages[] = {
+	2200000,
+	0,
+	2400000,
+};
+
+static const int vefuse_voltages[] = {
+	1200000,
+	1300000,
+	1500000,
+	0,
+	1800000,
+	0,
+	0,
+	0,
+	0,
+	2800000,
+	2900000,
+	3000000,
+	0,
+	3300000,
+};
+
+static const int vcn33_voltages[] = {
+	0,
+	3300000,
+	3400000,
+	3500000,
+};
+
+static const int vcama_voltages[] = {
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	2500000,
+	0,
+	0,
+	2800000,
+};
+
+static const int vcamd_voltages[] = {
+	0,
+	0,
+	0,
+	0,
+	1000000,
+	1100000,
+	1200000,
+	1300000,
+	0,
+	1500000,
+	0,
+	0,
+	1800000,
+};
+
+static const int vldo28_voltages[] = {
+	0,
+	2800000,
+	0,
+	3000000,
+};
+
+static const int vdram_voltages[] = {
+	0,
+	1100000,
+	1200000,
+};
+
+static const int vsim_voltages[] = {
+	0,
+	0,
+	0,
+	1700000,
+	1800000,
+	0,
+	0,
+	0,
+	2700000,
+	0,
+	0,
+	3000000,
+	3100000,
+};
+
+static const int vibr_voltages[] = {
+	1200000,
+	1300000,
+	1500000,
+	0,
+	1800000,
+	2000000,
+	0,
+	0,
+	0,
+	2800000,
+	0,
+	3000000,
+	0,
+	3300000,
+};
+
+static const int vmc_voltages[] = {
+	0,
+	0,
+	0,
+	0,
+	1800000,
+	0,
+	0,
+	0,
+	0,
+	0,
+	2900000,
+	3000000,
+	0,
+	3300000,
+};
+
+static const int vmch_voltages[] = {
+	0,
+	0,
+	2900000,
+	3000000,
+	0,
+	3300000,
+};
+
+static const int vemc_voltages[] = {
+	0,
+	0,
+	2900000,
+	3000000,
+	0,
+	3300000,
+};
+
+static const int vusb_voltages[] = {
+	0,
+	0,
+	0,
+	3000000,
+	3100000,
+};
+
+static const struct linear_range buck_volt_range1[] = {
+	REGULATOR_LINEAR_RANGE(518750, 0, 0x7f, 6250),
+};
+
+static const struct linear_range buck_volt_range2[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250),
+};
+
+static const struct linear_range buck_volt_range3[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
+};
+
+static const struct linear_range buck_volt_range4[] = {
+	REGULATOR_LINEAR_RANGE(1200000, 0, 0x7f, 12500),
+};
+
+/* The array is indexed by id(MT6357_ID_XXX) */
+static struct mt6357_regulator_info mt6357_regulators[] = {
+	/* Bucks */
+	MT6357_BUCK("buck-vcore", VCORE, 518750, 1312500, 6250,
+		buck_volt_range1, MT6357_BUCK_VCORE_ELR0, 0x7f, 0x7f),
+	MT6357_BUCK("buck-vproc", VPROC, 518750, 1312500, 6250,
+		buck_volt_range1, MT6357_BUCK_VPROC_ELR0, 0x7f, 0x7f),
+	MT6357_BUCK("buck-vmodem", VMODEM, 500000, 1293750, 6250,
+		buck_volt_range2, MT6357_BUCK_VMODEM_ELR0, 0x7f, 0x7f),
+	MT6357_BUCK("buck-vpa", VPA, 500000, 3650000, 50000,
+		buck_volt_range3, MT6357_BUCK_VPA_CON1, 0x3f, 0x3f),
+	MT6357_BUCK("buck-vs1", VS1, 1200000, 2787500, 12500,
+		buck_volt_range4, MT6357_BUCK_VS1_ELR0, 0x7f, 0x7f),
+
+	/* LDOs */
+	MT6357_LDO("ldo-vcama", VCAMA, vcama_voltages,
+		   MT6357_LDO_VCAMA_CON0, MT6357_VCAMA_ANA_CON0, 0xf00),
+	MT6357_LDO("ldo-vcamd", VCAMD, vcamd_voltages,
+		   MT6357_LDO_VCAMD_CON0, MT6357_VCAMD_ANA_CON0, 0xf00),
+	MT6357_LDO("ldo-vcn33-bt", VCN33_BT, vcn33_voltages,
+		   MT6357_LDO_VCN33_CON0_0, MT6357_VCN33_ANA_CON0, 0x300),
+	MT6357_LDO("ldo-vcn33-wifi", VCN33_WIFI, vcn33_voltages,
+		   MT6357_LDO_VCN33_CON0_1, MT6357_VCN33_ANA_CON0, 0x300),
+	MT6357_LDO("ldo-vdram", VDRAM, vdram_voltages,
+		   MT6357_LDO_VDRAM_CON0, MT6357_VDRAM_ELR_2, 0x300),
+	MT6357_LDO("ldo-vefuse", VEFUSE, vefuse_voltages,
+		   MT6357_LDO_VEFUSE_CON0, MT6357_VEFUSE_ANA_CON0, 0xf00),
+	MT6357_LDO("ldo-vemc", VEMC, vemc_voltages,
+		   MT6357_LDO_VEMC_CON0, MT6357_VEMC_ANA_CON0, 0x700),
+	MT6357_LDO("ldo-vibr", VIBR, vibr_voltages,
+		   MT6357_LDO_VIBR_CON0, MT6357_VIBR_ANA_CON0, 0xf00),
+	MT6357_LDO("ldo-vldo28", VLDO28, vldo28_voltages,
+		   MT6357_LDO_VLDO28_CON0_0, MT6357_VLDO28_ANA_CON0, 0x300),
+	MT6357_LDO("ldo-vmc", VMC, vmc_voltages,
+		   MT6357_LDO_VMC_CON0, MT6357_VMC_ANA_CON0, 0xf00),
+	MT6357_LDO("ldo-vmch", VMCH, vmch_voltages,
+		   MT6357_LDO_VMCH_CON0, MT6357_VMCH_ANA_CON0, 0x700),
+	MT6357_LDO("ldo-vsim1", VSIM1, vsim_voltages,
+		   MT6357_LDO_VSIM1_CON0, MT6357_VSIM1_ANA_CON0, 0xf00),
+	MT6357_LDO("ldo-vsim2", VSIM2, vsim_voltages,
+		   MT6357_LDO_VSIM2_CON0, MT6357_VSIM2_ANA_CON0, 0xf00),
+	MT6357_LDO("ldo-vusb33", VUSB33, vusb_voltages,
+		   MT6357_LDO_VUSB33_CON0_0, MT6357_VUSB33_ANA_CON0, 0x700),
+	MT6357_LDO("ldo-vxo22", VXO22, vxo22_voltages,
+		   MT6357_LDO_VXO22_CON0, MT6357_VXO22_ANA_CON0, 0x300),
+
+	MT6357_LDO1("ldo-vsram-proc", VSRAM_PROC, 518750, 1312500, 6250,
+		   buck_volt_range1, MT6357_LDO_VSRAM_PROC_CON0,
+		   MT6357_LDO_VSRAM_CON0, 0x7f00),
+	MT6357_LDO1("ldo-vsram-others", VSRAM_OTHERS, 518750, 1312500, 6250,
+		   buck_volt_range1, MT6357_LDO_VSRAM_OTHERS_CON0,
+		   MT6357_LDO_VSRAM_CON1, 0x7f00),
+
+	MT6357_REG_FIXED("ldo-vaud28", VAUD28, 2800000),
+	MT6357_REG_FIXED("ldo-vaux18", VAUX18, 1800000),
+	MT6357_REG_FIXED("ldo-vcamio18", VCAMIO, 1800000),
+	MT6357_REG_FIXED("ldo-vcn18", VCN18, 1800000),
+	MT6357_REG_FIXED("ldo-vcn28", VCN28, 2800000),
+	MT6357_REG_FIXED("ldo-vfe28", VFE28, 2800000),
+	MT6357_REG_FIXED("ldo-vio18", VIO18, 1800000),
+	MT6357_REG_FIXED("ldo-vio28", VIO28, 2800000),
+	MT6357_REG_FIXED("ldo-vrf12", VRF12, 1200000),
+	MT6357_REG_FIXED("ldo-vrf18", VRF18, 1800000),
+};
+
+static int mt6357_regulator_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6357 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+
+	pdev->dev.of_node = pdev->dev.parent->of_node;
+
+	for (i = 0; i < MT6357_MAX_REGULATOR; i++) {
+		config.dev = &pdev->dev;
+		config.driver_data = &mt6357_regulators[i];
+		config.regmap = mt6357->regmap;
+
+		rdev = devm_regulator_register(&pdev->dev,
+					       &mt6357_regulators[i].desc,
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n",
+				mt6357_regulators[i].desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id mt6357_platform_ids[] = {
+	{ "mt6357-regulator" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6357_platform_ids);
+
+static struct platform_driver mt6357_regulator_driver = {
+	.driver = {
+		.name = "mt6357-regulator",
+	},
+	.probe = mt6357_regulator_probe,
+	.id_table = mt6357_platform_ids,
+};
+
+module_platform_driver(mt6357_regulator_driver);
+
+MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>");
+MODULE_AUTHOR("Fabien Parent <fabien.parent@linaro.org>");
+MODULE_AUTHOR("Alexandre Mergnat <amergnat@baylibre.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6357 PMIC");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/mt6357-regulator.h b/include/linux/regulator/mt6357-regulator.h
new file mode 100644
index 000000000000..238b1ee77ea6
--- /dev/null
+++ b/include/linux/regulator/mt6357-regulator.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ */
+
+#ifndef __LINUX_REGULATOR_MT6357_H
+#define __LINUX_REGULATOR_MT6357_H
+
+enum {
+	/* Bucks */
+	MT6357_ID_VCORE,
+	MT6357_ID_VMODEM,
+	MT6357_ID_VPA,
+	MT6357_ID_VPROC,
+	MT6357_ID_VS1,
+
+	/* LDOs */
+	MT6357_ID_VAUX18,
+	MT6357_ID_VAUD28,
+	MT6357_ID_VCAMA,
+	MT6357_ID_VCAMD,
+	MT6357_ID_VCAMIO,
+	MT6357_ID_VCN18,
+	MT6357_ID_VCN28,
+	MT6357_ID_VCN33_BT,
+	MT6357_ID_VCN33_WIFI,
+	MT6357_ID_VDRAM,
+	MT6357_ID_VEFUSE,
+	MT6357_ID_VEMC,
+	MT6357_ID_VFE28,
+	MT6357_ID_VIBR,
+	MT6357_ID_VIO18,
+	MT6357_ID_VIO28,
+	MT6357_ID_VLDO28,
+	MT6357_ID_VMC,
+	MT6357_ID_VMCH,
+	MT6357_ID_VRF12,
+	MT6357_ID_VRF18,
+	MT6357_ID_VSIM1,
+	MT6357_ID_VSIM2,
+	MT6357_ID_VSRAM_OTHERS,
+	MT6357_ID_VSRAM_PROC,
+	MT6357_ID_VUSB33,
+	MT6357_ID_VXO22,
+
+	MT6357_ID_RG_MAX,
+};
+
+#define MT6357_MAX_REGULATOR	MT6357_ID_RG_MAX
+
+#endif /* __LINUX_REGULATOR_MT6357_H */

-- 
b4 0.10.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v7 8/8] Input: mtk-pmic-keys: add MT6357 support

[Alexandre Mergnat]

From: Fabien Parent <fparent@baylibre.com>

Add PMIC Keys support on MT6357 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 drivers/input/keyboard/mtk-pmic-keys.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/input/keyboard/mtk-pmic-keys.c b/drivers/input/keyboard/mtk-pmic-keys.c
index 9b34da0ec260..2a63e0718eb6 100644
--- a/drivers/input/keyboard/mtk-pmic-keys.c
+++ b/drivers/input/keyboard/mtk-pmic-keys.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/mfd/mt6323/registers.h>
 #include <linux/mfd/mt6331/registers.h>
+#include <linux/mfd/mt6357/registers.h>
 #include <linux/mfd/mt6358/registers.h>
 #include <linux/mfd/mt6397/core.h>
 #include <linux/mfd/mt6397/registers.h>
@@ -90,6 +91,19 @@ static const struct mtk_pmic_regs mt6331_regs = {
 	.rst_lprst_mask = MTK_PMIC_MT6331_RST_DU_MASK,
 };
 
+static const struct mtk_pmic_regs mt6357_regs = {
+	.keys_regs[MTK_PMIC_PWRKEY_INDEX] =
+		MTK_PMIC_KEYS_REGS(MT6357_TOPSTATUS,
+				   0x2, MT6357_PSC_TOP_INT_CON0, 0x5,
+				   MTK_PMIC_PWRKEY_RST),
+	.keys_regs[MTK_PMIC_HOMEKEY_INDEX] =
+		MTK_PMIC_KEYS_REGS(MT6357_TOPSTATUS,
+				   0x8, MT6357_PSC_TOP_INT_CON0, 0xa,
+				   MTK_PMIC_HOMEKEY_INDEX),
+	.pmic_rst_reg = MT6357_TOP_RST_MISC,
+	.rst_lprst_mask = MTK_PMIC_RST_DU_MASK,
+};
+
 static const struct mtk_pmic_regs mt6358_regs = {
 	.keys_regs[MTK_PMIC_PWRKEY_INDEX] =
 		MTK_PMIC_KEYS_REGS(MT6358_TOPSTATUS,
@@ -276,6 +290,9 @@ static const struct of_device_id of_mtk_pmic_keys_match_tbl[] = {
 	}, {
 		.compatible = "mediatek,mt6331-keys",
 		.data = &mt6331_regs,
+	}, {
+		.compatible = "mediatek,mt6357-keys",
+		.data = &mt6357_regs,
 	}, {
 		.compatible = "mediatek,mt6358-keys",
 		.data = &mt6358_regs,

-- 
b4 0.10.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v7 4/8] dt-bindings: mfd: mediatek: Add bindings for MT6357 PMIC

[Lee Jones]

On Tue, 29 Nov 2022, Alexandre Mergnat wrote:

> Currently, almost all MT63XX PMIC are documented mfd/mt6397.txt.
> Unfortunately, the PMICs haven't always similar HW sub-features.
> To have a better human readable schema, I chose to make one PMIC schema
> to match the exact HW capabilities instead of convert mt6397.txt to
> mediatek,mt63xx.yaml and put a bunch of properties behind
> "if contain ... then ..."
> 
> - add interrupt property
> - change property refs to match with new yaml documentation
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>

Acked-by: Lee Jones <lee@kernel.org>

> ---
>  .../devicetree/bindings/mfd/mediatek,mt6357.yaml   | 111 +++++++++++++++++++++
>  1 file changed, 111 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
> new file mode 100644
> index 000000000000..837a77013d57
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
> @@ -0,0 +1,111 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/mediatek,mt6357.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek MT6357 PMIC
> +
> +maintainers:
> +  - Flora Fu <flora.fu@mediatek.com>
> +  - Alexandre Mergnat <amergnat@baylibre.com>
> +
> +description: |
> +  MT6357 is a power management system chip containing 5 buck
> +  converters and 29 LDOs. Supported features are audio codec,
> +  USB battery charging, fuel gauge, RTC
> +
> +  This is a multifunction device with the following sub modules:
> +  - Regulator
> +  - RTC
> +  - Keys
> +
> +  It is interfaced to host controller using SPI interface by a proprietary hardware
> +  called PMIC wrapper or pwrap. This MFD is a child device of pwrap.
> +  See the following for pwrap node definitions:
> +  Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
> +
> +properties:
> +  compatible:
> +    const: mediatek,mt6357
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 2
> +
> +  regulators:
> +    type: object
> +    $ref: /schemas/regulator/mediatek,mt6357-regulator.yaml
> +    description:
> +      List of MT6357 BUCKs and LDOs regulators.
> +
> +  rtc:
> +    type: object
> +    $ref: /schemas/rtc/rtc.yaml#
> +    description:
> +      MT6357 Real Time Clock.
> +    properties:
> +      compatible:
> +        const: mediatek,mt6357-rtc
> +      start-year: true
> +    required:
> +      - compatible
> +
> +  keys:
> +    type: object
> +    $ref: /schemas/input/mediatek,pmic-keys.yaml
> +    description:
> +      MT6357 power and home keys.
> +
> +required:
> +  - compatible
> +  - regulators
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    pwrap {
> +        pmic {
> +            compatible = "mediatek,mt6357";
> +
> +            interrupt-parent = <&pio>;
> +            interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-controller;
> +            #interrupt-cells = <2>;
> +
> +            regulators {
> +                mt6357_vproc_reg: buck-vproc {
> +                    regulator-name = "vproc";
> +                    regulator-min-microvolt = <518750>;
> +                    regulator-max-microvolt = <1312500>;
> +                    regulator-ramp-delay = <6250>;
> +                    regulator-enable-ramp-delay = <220>;
> +                    regulator-always-on;
> +                };
> +
> +                // ...
> +
> +                mt6357_vusb33_reg: ldo-vusb33 {
> +                    regulator-name = "vusb33";
> +                    regulator-min-microvolt = <3000000>;
> +                    regulator-max-microvolt = <3100000>;
> +                    regulator-enable-ramp-delay = <264>;
> +                };
> +            };
> +
> +            rtc {
> +                compatible = "mediatek,mt6357-rtc";
> +            };
> +
> +            keys {
> +                compatible = "mediatek,mt6357-keys";
> +            };
> +        };
> +    };
> 

-- 
Lee Jones [李琼斯]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v7 3/8] dt-bindings: soc: mediatek: convert pwrap documentation

[Rob Herring]

On Tue, 29 Nov 2022 16:57:02 +0100, Alexandre Mergnat wrote:
> - Convert soc/mediatek/pwrap.txt to soc/mediatek/mediatek,pwrap.yaml
> - Add syscon compatible const for mt8186 and mt8195 to match the DTS needs,
>   which is missing from pwrap.txt.
> 
> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
> ---
>  .../devicetree/bindings/leds/leds-mt6323.txt       |   2 +-
>  Documentation/devicetree/bindings/mfd/mt6397.txt   |   2 +-
>  .../bindings/soc/mediatek/mediatek,pwrap.yaml      | 147 +++++++++++++++++++++
>  .../devicetree/bindings/soc/mediatek/pwrap.txt     |  75 -----------
>  4 files changed, 149 insertions(+), 77 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH v7 0/8] Add MediaTek MT6357 PMIC support

[Mark Brown]

On Tue, 29 Nov 2022 16:56:59 +0100, Alexandre Mergnat wrote:
> This patch series adds MFD, PMIC keys, and regulator support for MT6357.
> MT6357 is a MediaTek PMIC very similar to MT6358.
> 
> Currently, MTK bindings related to the PMICs are not converted yet (still .txt):
> 
> soc/mediatek/pwrap.txt (all PMIC parent)
>       |
>       V
> mfd/mt6397.txt (support lot of mt63XX PMIC)
>       +---------------+----------------+---...
>       V               V                V
> regulator/...      rtc/...          codec/...
> 
> [...]

Applied to

   broonie/regulator.git for-next

Thanks!

[2/8] regulator: dt-bindings: Add binding schema for mt6357 regulators
      commit: b4387db19d7f1caf166852782a5f0e5a393bdf24
[7/8] regulator: add mt6357 regulator
      commit: dafc7cde23dca239987d3cd000b11cdccc3728ea

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v7 0/8] Add MediaTek MT6357 PMIC support

[Kevin Hilman]

Matthias,

Alexandre Mergnat <amergnat@baylibre.com> writes:

> This patch series adds MFD, PMIC keys, and regulator support for MT6357.
> MT6357 is a MediaTek PMIC very similar to MT6358.

The regulator driver (and bindings) were merged by Mark.  Could you take
the rest of this series via your mediatek tree?  The input driver (and
bindings) are ack'd by Dmitry.

Kevin





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v7 0/8] Add MediaTek MT6357 PMIC support

[Matthias Brugger]

Hi Kevin,
Hi Alexandre,

On 05/12/2022 14:16, Kevin Hilman wrote:
> Matthias,
> 
> Alexandre Mergnat <amergnat@baylibre.com> writes:
> 
>> This patch series adds MFD, PMIC keys, and regulator support for MT6357.
>> MT6357 is a MediaTek PMIC very similar to MT6358.
> 
> The regulator driver (and bindings) were merged by Mark.  Could you take
> the rest of this series via your mediatek tree?  The input driver (and
> bindings) are ack'd by Dmitry.
> 

Yes I can do that but 3/8 does not apply cleanly. Could you please rebase on top 
of v6.2-tmp/soc?

Thanks
Matthias

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v7 0/8] Add MediaTek MT6357 PMIC support

[Alexandre Mergnat]

> >> This patch series adds MFD, PMIC keys, and regulator support for MT6357.
> >> MT6357 is a MediaTek PMIC very similar to MT6358.
> >
> > The regulator driver (and bindings) were merged by Mark.  Could you take
> > the rest of this series via your mediatek tree?  The input driver (and
> > bindings) are ack'd by Dmitry.
> >
>
> Yes I can do that but 3/8 does not apply cleanly. Could you please rebase on top
> of v6.2-tmp/soc?

Hi Matthias,

I've pushed the V8 rebased on top of v6.2-tmp/soc.
https://lore.kernel.org/r/20221005-mt6357-support-v8-0-560caaafee53@baylibre.com

Thanks,
Alex

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v7 0/8] Add MediaTek MT6357 PMIC support

[Alexandre Mergnat]

Hi Matthias,

Gentle ping to merge the v8 rebased on top of v6.2-tmp/soc.
https://lore.kernel.org/r/20221005-mt6357-support-v8-0-560caaafee53@baylibre.com

Thanks,
Alex

Le lun. 2 janv. 2023 à 17:10, Alexandre Mergnat
<amergnat@baylibre.com> a écrit :
>
> > >> This patch series adds MFD, PMIC keys, and regulator support for MT6357.
> > >> MT6357 is a MediaTek PMIC very similar to MT6358.
> > >
> > > The regulator driver (and bindings) were merged by Mark.  Could you take
> > > the rest of this series via your mediatek tree?  The input driver (and
> > > bindings) are ack'd by Dmitry.
> > >
> >
> > Yes I can do that but 3/8 does not apply cleanly. Could you please rebase on top
> > of v6.2-tmp/soc?
>
> Hi Matthias,
>
> I've pushed the V8 rebased on top of v6.2-tmp/soc.
> https://lore.kernel.org/r/20221005-mt6357-support-v8-0-560caaafee53@baylibre.com
>
> Thanks,
> Alex

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel