[PATCH 7/8] iommu: of: Handle IOMMU lookup failure with deferred probing or error

[m.szyprowski@samsung.com (Marek Szyprowski)]

Hi Sricharan,

On 2016-08-09 00:49, Sricharan R wrote:
 > From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
 >
 > Failures to look up an IOMMU when parsing the DT iommus property need to
 > be handled separately from the .of_xlate() failures to support deferred
 > probing.
 >
 > The lack of a registered IOMMU can be caused by the lack of a driver for
 > the IOMMU, the IOMMU device probe not having been performed yet, having
 > been deferred, or having failed.
 >
 > The first case occurs when the device tree describes the bus master and
 > IOMMU topology correctly but no device driver exists for the IOMMU yet
 > or the device driver has not been compiled in. Return NULL, the caller
 > will configure the device without an IOMMU.
 >
 > The second and third cases are handled by deferring the probe of the bus
 > master device which will eventually get reprobed after the IOMMU.
 >
 > The last case is currently handled by deferring the probe of the bus
 > master device as well. A mechanism to either configure the bus master
 > device without an IOMMU or to fail the bus master device probe depending
 > on whether the IOMMU is optional or mandatory would be a good
 > enhancement.
 >
 > Signed-off-by: Laurent Pinchart 
<laurent.pinchart+renesas@ideasonboard.com>

It is a common practice to briefly describe here what has been changed
since the original patch if you have modified it (see commit
855ed04a3758b205e84b269f92d26ab36ed8e2f7 for the example).

 > Signed-off-by: Sricharan R <sricharan@codeaurora.org>
 > ---
 >  drivers/iommu/of_iommu.c | 21 +++++++++++++++++----
 >  drivers/of/device.c      |  2 ++
 >  2 files changed, 19 insertions(+), 4 deletions(-)
 >
 > diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
 > index 4c4219d..3994cf5 100644
 > --- a/drivers/iommu/of_iommu.c
 > +++ b/drivers/iommu/of_iommu.c
 > @@ -149,7 +149,7 @@ const struct iommu_ops *of_iommu_configure(struct 
device *dev,
 >  {
 >      struct of_phandle_args iommu_spec;
 >      struct device_node *np = NULL;
 > -    struct iommu_ops *ops = NULL;
 > +    const struct iommu_ops *ops = NULL;
 >      int idx = 0;
 >
 >      if (dev_is_pci(dev)) {
 > @@ -189,8 +189,21 @@ const struct iommu_ops 
*of_iommu_configure(struct device *dev,
 >          np = iommu_spec.np;
 >          ops = of_iommu_get_ops(np);
 >
 > -        if (!ops || !ops->of_xlate || ops->of_xlate(dev, &iommu_spec))
 > +        if (!ops) {
 > +            const struct of_device_id *oid;
 > +
 > +            oid = of_match_node(&__iommu_of_table, np);
 > +            ops = oid ? ERR_PTR(-EPROBE_DEFER) : NULL;
 >              goto err_put_node;
 > +        }
 > +
 > +        if (!ops->of_xlate || ops->of_xlate(dev, &iommu_spec)) {
 > +            ops = NULL;
 > +            goto err_put_node;
 > +        }
 > +
 > +        if (ops->add_device)
 > +            ops = ops->add_device(dev) ? ops : NULL;

ops->add_device() returns ZERO on success or error code on failure, so 
the above
line should be changed to:
             ops = (ops->add_device(dev) == 0) ? ops : NULL;


 >          of_node_put(np);
 >          idx++;
 > @@ -200,7 +213,7 @@ const struct iommu_ops *of_iommu_configure(struct 
device *dev,
 >
 >  err_put_node:
 >      of_node_put(np);
 > -    return NULL;
 > +    return ops;
 >  }
 >
 >  void __init of_iommu_init(void)
 > @@ -211,7 +224,7 @@ void __init of_iommu_init(void)
 >      for_each_matching_node_and_match(np, matches, &match) {
 >          const of_iommu_init_fn init_fn = match->data;
 >
 > -        if (init_fn(np))
 > +        if (init_fn && init_fn(np))
 >              pr_err("Failed to initialise IOMMU %s\n",
 >                  of_node_full_name(np));
 >      }
 > diff --git a/drivers/of/device.c b/drivers/of/device.c
 > index e1fad50..92e02dc 100644
 > --- a/drivers/of/device.c
 > +++ b/drivers/of/device.c
 > @@ -149,6 +149,8 @@ int of_dma_configure_ops(struct device *dev, 
struct device_node *np)
 >          coherent ? " " : " not ");
 >
 >      iommu = of_iommu_configure(dev, np);
 > +    if (IS_ERR(iommu))
 > +        return PTR_ERR(iommu);
 >      dev_dbg(dev, "device is%sbehind an iommu\n",
 >          iommu ? " " : " not ");
 >

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland