* [PATCH] PM/runtime: Fix 'jiffies' in comments after move to hrtimers
@ 2019-01-09 17:23 Ladislav Michl
2019-01-09 22:03 ` Rafael J. Wysocki
0 siblings, 1 reply; 5+ messages in thread
From: Ladislav Michl @ 2019-01-09 17:23 UTC (permalink / raw)
To: linux-pm, linux-kernel, linux-arm-kernel, linux-omap, rjw,
ulf.hansson, tony
Cc: Vincent Guittot
PM-runtime now uses the hrtimers infrastructure for autosuspend, however
comments still reference 'jiffies'.
Fixes: 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers")
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
drivers/base/power/runtime.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 70624695b6d5..096f7996d914 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -121,7 +121,7 @@ static void pm_runtime_cancel_pending(struct device *dev)
* Compute the autosuspend-delay expiration time based on the device's
* power.last_busy time. If the delay has already expired or is disabled
* (negative) or the power.use_autosuspend flag isn't set, return 0.
- * Otherwise return the expiration time in jiffies (adjusted to be nonzero).
+ * Otherwise return the expiration time in nanoseconds (adjusted to be nonzero).
*
* This function may be called either with or without dev->power.lock held.
* Either way it can be racy, since power.last_busy may be updated at any time.
@@ -905,7 +905,7 @@ static enum hrtimer_restart pm_suspend_timer_fn(struct hrtimer *timer)
spin_lock_irqsave(&dev->power.lock, flags);
expires = dev->power.timer_expires;
- /* If 'expire' is after 'jiffies' we've been called too early. */
+ /* If 'timer_expires' after 'now' we've been called too early. */
if (expires > 0 && expires < ktime_to_ns(ktime_get())) {
dev->power.timer_expires = 0;
rpm_suspend(dev, dev->power.timer_autosuspends ?
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] PM/runtime: Fix 'jiffies' in comments after move to hrtimers
2019-01-09 17:23 [PATCH] PM/runtime: Fix 'jiffies' in comments after move to hrtimers Ladislav Michl
@ 2019-01-09 22:03 ` Rafael J. Wysocki
2019-01-09 23:19 ` [PATCH v2] " Ladislav Michl
0 siblings, 1 reply; 5+ messages in thread
From: Rafael J. Wysocki @ 2019-01-09 22:03 UTC (permalink / raw)
To: Ladislav Michl
Cc: Ulf Hansson, Vincent Guittot, Linux PM, Tony Lindgren,
Rafael J. Wysocki, Linux Kernel Mailing List,
Linux OMAP Mailing List, Linux ARM
On Wed, Jan 9, 2019 at 6:23 PM Ladislav Michl <ladis@linux-mips.org> wrote:
>
> PM-runtime now uses the hrtimers infrastructure for autosuspend, however
> comments still reference 'jiffies'.
>
> Fixes: 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers")
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> ---
> drivers/base/power/runtime.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
> index 70624695b6d5..096f7996d914 100644
> --- a/drivers/base/power/runtime.c
> +++ b/drivers/base/power/runtime.c
> @@ -121,7 +121,7 @@ static void pm_runtime_cancel_pending(struct device *dev)
> * Compute the autosuspend-delay expiration time based on the device's
> * power.last_busy time. If the delay has already expired or is disabled
> * (negative) or the power.use_autosuspend flag isn't set, return 0.
> - * Otherwise return the expiration time in jiffies (adjusted to be nonzero).
> + * Otherwise return the expiration time in nanoseconds (adjusted to be nonzero).
> *
> * This function may be called either with or without dev->power.lock held.
> * Either way it can be racy, since power.last_busy may be updated at any time.
> @@ -905,7 +905,7 @@ static enum hrtimer_restart pm_suspend_timer_fn(struct hrtimer *timer)
> spin_lock_irqsave(&dev->power.lock, flags);
>
> expires = dev->power.timer_expires;
> - /* If 'expire' is after 'jiffies' we've been called too early. */
> + /* If 'timer_expires' after 'now' we've been called too early. */
I would say "If 'expires' is after the current time, we've been called
to early" here.
> if (expires > 0 && expires < ktime_to_ns(ktime_get())) {
> dev->power.timer_expires = 0;
> rpm_suspend(dev, dev->power.timer_autosuspends ?
> --
> 2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2] PM/runtime: Fix 'jiffies' in comments after move to hrtimers
2019-01-09 22:03 ` Rafael J. Wysocki
@ 2019-01-09 23:19 ` Ladislav Michl
2019-01-10 18:57 ` Vincent Guittot
2019-01-11 10:40 ` Rafael J. Wysocki
0 siblings, 2 replies; 5+ messages in thread
From: Ladislav Michl @ 2019-01-09 23:19 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Ulf Hansson, Vincent Guittot, Linux PM, Tony Lindgren,
Rafael J. Wysocki, Linux Kernel Mailing List,
Linux OMAP Mailing List, Linux ARM
PM-runtime now uses the hrtimers infrastructure for autosuspend, however
comments still reference 'jiffies'.
Fixes: 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers")
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
Changes:
-v2: Reword comment accoring to Rafael's suggestion
drivers/base/power/runtime.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 70624695b6d5..a282e74d1a16 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -121,7 +121,7 @@ static void pm_runtime_cancel_pending(struct device *dev)
* Compute the autosuspend-delay expiration time based on the device's
* power.last_busy time. If the delay has already expired or is disabled
* (negative) or the power.use_autosuspend flag isn't set, return 0.
- * Otherwise return the expiration time in jiffies (adjusted to be nonzero).
+ * Otherwise return the expiration time in nanoseconds (adjusted to be nonzero).
*
* This function may be called either with or without dev->power.lock held.
* Either way it can be racy, since power.last_busy may be updated at any time.
@@ -905,7 +905,10 @@ static enum hrtimer_restart pm_suspend_timer_fn(struct hrtimer *timer)
spin_lock_irqsave(&dev->power.lock, flags);
expires = dev->power.timer_expires;
- /* If 'expire' is after 'jiffies' we've been called too early. */
+ /*
+ * If 'expires' is after the current time, we've been called
+ * too early.
+ */
if (expires > 0 && expires < ktime_to_ns(ktime_get())) {
dev->power.timer_expires = 0;
rpm_suspend(dev, dev->power.timer_autosuspends ?
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2] PM/runtime: Fix 'jiffies' in comments after move to hrtimers
2019-01-09 23:19 ` [PATCH v2] " Ladislav Michl
@ 2019-01-10 18:57 ` Vincent Guittot
2019-01-11 10:40 ` Rafael J. Wysocki
1 sibling, 0 replies; 5+ messages in thread
From: Vincent Guittot @ 2019-01-10 18:57 UTC (permalink / raw)
To: Ladislav Michl
Cc: Ulf Hansson, Linux PM, Tony Lindgren, Rafael J. Wysocki,
Rafael J. Wysocki, Linux Kernel Mailing List,
Linux OMAP Mailing List, Linux ARM
On Thu, 10 Jan 2019 at 00:19, Ladislav Michl <ladis@linux-mips.org> wrote:
>
> PM-runtime now uses the hrtimers infrastructure for autosuspend, however
> comments still reference 'jiffies'.
>
> Fixes: 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers")
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
> ---
> Changes:
> -v2: Reword comment accoring to Rafael's suggestion
>
> drivers/base/power/runtime.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
> index 70624695b6d5..a282e74d1a16 100644
> --- a/drivers/base/power/runtime.c
> +++ b/drivers/base/power/runtime.c
> @@ -121,7 +121,7 @@ static void pm_runtime_cancel_pending(struct device *dev)
> * Compute the autosuspend-delay expiration time based on the device's
> * power.last_busy time. If the delay has already expired or is disabled
> * (negative) or the power.use_autosuspend flag isn't set, return 0.
> - * Otherwise return the expiration time in jiffies (adjusted to be nonzero).
> + * Otherwise return the expiration time in nanoseconds (adjusted to be nonzero).
> *
> * This function may be called either with or without dev->power.lock held.
> * Either way it can be racy, since power.last_busy may be updated at any time.
> @@ -905,7 +905,10 @@ static enum hrtimer_restart pm_suspend_timer_fn(struct hrtimer *timer)
> spin_lock_irqsave(&dev->power.lock, flags);
>
> expires = dev->power.timer_expires;
> - /* If 'expire' is after 'jiffies' we've been called too early. */
> + /*
> + * If 'expires' is after the current time, we've been called
> + * too early.
> + */
> if (expires > 0 && expires < ktime_to_ns(ktime_get())) {
> dev->power.timer_expires = 0;
> rpm_suspend(dev, dev->power.timer_autosuspends ?
> --
> 2.20.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] PM/runtime: Fix 'jiffies' in comments after move to hrtimers
2019-01-09 23:19 ` [PATCH v2] " Ladislav Michl
2019-01-10 18:57 ` Vincent Guittot
@ 2019-01-11 10:40 ` Rafael J. Wysocki
1 sibling, 0 replies; 5+ messages in thread
From: Rafael J. Wysocki @ 2019-01-11 10:40 UTC (permalink / raw)
To: Ladislav Michl
Cc: Ulf Hansson, Vincent Guittot, Linux PM, Tony Lindgren,
Rafael J. Wysocki, Linux Kernel Mailing List,
Linux OMAP Mailing List, Linux ARM
On Thursday, January 10, 2019 12:19:44 AM CET Ladislav Michl wrote:
> PM-runtime now uses the hrtimers infrastructure for autosuspend, however
> comments still reference 'jiffies'.
>
> Fixes: 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers")
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> ---
> Changes:
> -v2: Reword comment accoring to Rafael's suggestion
>
> drivers/base/power/runtime.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
> index 70624695b6d5..a282e74d1a16 100644
> --- a/drivers/base/power/runtime.c
> +++ b/drivers/base/power/runtime.c
> @@ -121,7 +121,7 @@ static void pm_runtime_cancel_pending(struct device *dev)
> * Compute the autosuspend-delay expiration time based on the device's
> * power.last_busy time. If the delay has already expired or is disabled
> * (negative) or the power.use_autosuspend flag isn't set, return 0.
> - * Otherwise return the expiration time in jiffies (adjusted to be nonzero).
> + * Otherwise return the expiration time in nanoseconds (adjusted to be nonzero).
> *
> * This function may be called either with or without dev->power.lock held.
> * Either way it can be racy, since power.last_busy may be updated at any time.
> @@ -905,7 +905,10 @@ static enum hrtimer_restart pm_suspend_timer_fn(struct hrtimer *timer)
> spin_lock_irqsave(&dev->power.lock, flags);
>
> expires = dev->power.timer_expires;
> - /* If 'expire' is after 'jiffies' we've been called too early. */
> + /*
> + * If 'expires' is after the current time, we've been called
> + * too early.
> + */
> if (expires > 0 && expires < ktime_to_ns(ktime_get())) {
> dev->power.timer_expires = 0;
> rpm_suspend(dev, dev->power.timer_autosuspends ?
>
Applied, thanks!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-01-11 10:41 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-09 17:23 [PATCH] PM/runtime: Fix 'jiffies' in comments after move to hrtimers Ladislav Michl
2019-01-09 22:03 ` Rafael J. Wysocki
2019-01-09 23:19 ` [PATCH v2] " Ladislav Michl
2019-01-10 18:57 ` Vincent Guittot
2019-01-11 10:40 ` Rafael J. Wysocki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).