* [PATCH 0/2] serial: mps2-uart: minor improvements @ 2019-01-25 14:13 Vladimir Murzin 2019-01-25 14:13 ` [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation Vladimir Murzin 2019-01-25 14:13 ` [PATCH 2/2] serial: mps2-uart: support combined tx and rx irq Vladimir Murzin 0 siblings, 2 replies; 8+ messages in thread From: Vladimir Murzin @ 2019-01-25 14:13 UTC (permalink / raw) To: linux-serial; +Cc: linux-arm-kernel, sudeep.holla This mini series is supposed to improve MPS2 uart driver for: 1. platforms with number of virtual serial ports, like MPS3 2. platforms with combined TX/RX irq Vladimir Murzin (2): serial: mps2-uart: move to dynamic port allocation serial: mps2-uart: support combined tx and rx irq drivers/tty/serial/mps2-uart.c | 136 ++++++++++++++++++++++++++++------------- 1 file changed, 95 insertions(+), 41 deletions(-) -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation 2019-01-25 14:13 [PATCH 0/2] serial: mps2-uart: minor improvements Vladimir Murzin @ 2019-01-25 14:13 ` Vladimir Murzin 2019-01-30 8:27 ` Greg KH 2019-01-25 14:13 ` [PATCH 2/2] serial: mps2-uart: support combined tx and rx irq Vladimir Murzin 1 sibling, 1 reply; 8+ messages in thread From: Vladimir Murzin @ 2019-01-25 14:13 UTC (permalink / raw) To: linux-serial; +Cc: linux-arm-kernel, sudeep.holla Some designs, like MPS3, expose number of virtual serial ports which already close or exceeds MPS2_MAX_PORTS. Increasing MPS2_MAX_PORTS would have negative impact (in terms of memory consumption) on tiny MPS2 platform which, in fact, has only one physically populated UART. Start with converting existent static port array to idr. As a bonus it make driver not to fail in case when no alias was specified in device tree. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> --- drivers/tty/serial/mps2-uart.c | 47 ++++++++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 16 deletions(-) diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c index 9f8f637..6da0633 100644 --- a/drivers/tty/serial/mps2-uart.c +++ b/drivers/tty/serial/mps2-uart.c @@ -22,6 +22,7 @@ #include <linux/serial_core.h> #include <linux/tty_flip.h> #include <linux/types.h> +#include <linux/idr.h> #define SERIAL_NAME "ttyMPS" #define DRIVER_NAME "mps2-uart" @@ -397,7 +398,7 @@ static const struct uart_ops mps2_uart_pops = { .verify_port = mps2_uart_verify_port, }; -static struct mps2_uart_port mps2_uart_ports[MPS2_MAX_PORTS]; +static DEFINE_IDR(ports_idr); #ifdef CONFIG_SERIAL_MPS2_UART_CONSOLE static void mps2_uart_console_putchar(struct uart_port *port, int ch) @@ -410,7 +411,8 @@ static void mps2_uart_console_putchar(struct uart_port *port, int ch) static void mps2_uart_console_write(struct console *co, const char *s, unsigned int cnt) { - struct uart_port *port = &mps2_uart_ports[co->index].port; + struct mps2_uart_port *mps_port = idr_find(&ports_idr, co->index); + struct uart_port *port = &mps_port->port; uart_console_write(port, s, cnt, mps2_uart_console_putchar); } @@ -426,7 +428,10 @@ static int mps2_uart_console_setup(struct console *co, char *options) if (co->index < 0 || co->index >= MPS2_MAX_PORTS) return -ENODEV; - mps_port = &mps2_uart_ports[co->index]; + mps_port = idr_find(&ports_idr, co->index); + + if (!mps_port) + return -ENODEV; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -487,27 +492,32 @@ static struct uart_driver mps2_uart_driver = { .cons = MPS2_SERIAL_CONSOLE, }; -static struct mps2_uart_port *mps2_of_get_port(struct platform_device *pdev) +static int mps2_of_get_port(struct platform_device *pdev, + struct mps2_uart_port *mps_port) { struct device_node *np = pdev->dev.of_node; int id; if (!np) - return NULL; + return -ENODEV; id = of_alias_get_id(np, "serial"); + + if (id < 0) + id = idr_alloc_cyclic(&ports_idr, (void *)mps_port, 0, MPS2_MAX_PORTS, GFP_KERNEL); + else + id = idr_alloc(&ports_idr, (void *)mps_port, id, MPS2_MAX_PORTS, GFP_KERNEL); + if (id < 0) - id = 0; + return id; - if (WARN_ON(id >= MPS2_MAX_PORTS)) - return NULL; + mps_port->port.line = id; - mps2_uart_ports[id].port.line = id; - return &mps2_uart_ports[id]; + return 0; } -static int mps2_init_port(struct mps2_uart_port *mps_port, - struct platform_device *pdev) +static int mps2_init_port(struct platform_device *pdev, + struct mps2_uart_port *mps_port) { struct resource *res; int ret; @@ -550,11 +560,16 @@ static int mps2_serial_probe(struct platform_device *pdev) struct mps2_uart_port *mps_port; int ret; - mps_port = mps2_of_get_port(pdev); - if (!mps_port) - return -ENODEV; + mps_port = devm_kzalloc(&pdev->dev, sizeof(struct mps2_uart_port), GFP_KERNEL); + + if (!mps_port) + return -ENOMEM; + + ret = mps2_of_get_port(pdev, mps_port); + if (ret) + return ret; - ret = mps2_init_port(mps_port, pdev); + ret = mps2_init_port(pdev, mps_port); if (ret) return ret; -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation 2019-01-25 14:13 ` [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation Vladimir Murzin @ 2019-01-30 8:27 ` Greg KH 2019-01-30 8:58 ` Vladimir Murzin 0 siblings, 1 reply; 8+ messages in thread From: Greg KH @ 2019-01-30 8:27 UTC (permalink / raw) To: Vladimir Murzin; +Cc: linux-arm-kernel, linux-serial, sudeep.holla On Fri, Jan 25, 2019 at 02:13:16PM +0000, Vladimir Murzin wrote: > Some designs, like MPS3, expose number of virtual serial ports which > already close or exceeds MPS2_MAX_PORTS. Increasing MPS2_MAX_PORTS > would have negative impact (in terms of memory consumption) on tiny > MPS2 platform which, in fact, has only one physically populated UART. > > Start with converting existent static port array to idr. As a bonus it > make driver not to fail in case when no alias was specified in device > tree. > > Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> > --- > drivers/tty/serial/mps2-uart.c | 47 ++++++++++++++++++++++++++++-------------- > 1 file changed, 31 insertions(+), 16 deletions(-) > > diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c > index 9f8f637..6da0633 100644 > --- a/drivers/tty/serial/mps2-uart.c > +++ b/drivers/tty/serial/mps2-uart.c > @@ -22,6 +22,7 @@ > #include <linux/serial_core.h> > #include <linux/tty_flip.h> > #include <linux/types.h> > +#include <linux/idr.h> > > #define SERIAL_NAME "ttyMPS" > #define DRIVER_NAME "mps2-uart" > @@ -397,7 +398,7 @@ static const struct uart_ops mps2_uart_pops = { > .verify_port = mps2_uart_verify_port, > }; > > -static struct mps2_uart_port mps2_uart_ports[MPS2_MAX_PORTS]; > +static DEFINE_IDR(ports_idr); You forgot to call idr_destroy() when your code unloads :( Yeah, it's not an obvious design pattern, I think someone will fix it up someday... thanks, greg k-h _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation 2019-01-30 8:27 ` Greg KH @ 2019-01-30 8:58 ` Vladimir Murzin 2019-01-30 9:24 ` Greg KH 0 siblings, 1 reply; 8+ messages in thread From: Vladimir Murzin @ 2019-01-30 8:58 UTC (permalink / raw) To: Greg KH; +Cc: linux-arm-kernel, linux-serial, sudeep.holla On 1/30/19 8:27 AM, Greg KH wrote: > On Fri, Jan 25, 2019 at 02:13:16PM +0000, Vladimir Murzin wrote: >> Some designs, like MPS3, expose number of virtual serial ports which >> already close or exceeds MPS2_MAX_PORTS. Increasing MPS2_MAX_PORTS >> would have negative impact (in terms of memory consumption) on tiny >> MPS2 platform which, in fact, has only one physically populated UART. >> >> Start with converting existent static port array to idr. As a bonus it >> make driver not to fail in case when no alias was specified in device >> tree. >> >> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> >> --- >> drivers/tty/serial/mps2-uart.c | 47 ++++++++++++++++++++++++++++-------------- >> 1 file changed, 31 insertions(+), 16 deletions(-) >> >> diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c >> index 9f8f637..6da0633 100644 >> --- a/drivers/tty/serial/mps2-uart.c >> +++ b/drivers/tty/serial/mps2-uart.c >> @@ -22,6 +22,7 @@ >> #include <linux/serial_core.h> >> #include <linux/tty_flip.h> >> #include <linux/types.h> >> +#include <linux/idr.h> >> >> #define SERIAL_NAME "ttyMPS" >> #define DRIVER_NAME "mps2-uart" >> @@ -397,7 +398,7 @@ static const struct uart_ops mps2_uart_pops = { >> .verify_port = mps2_uart_verify_port, >> }; >> >> -static struct mps2_uart_port mps2_uart_ports[MPS2_MAX_PORTS]; >> +static DEFINE_IDR(ports_idr); > > You forgot to call idr_destroy() when your code unloads :( Hmm, but code doesn't unload since ce87122911f8 ("serial: mps2-uart: make driver explicitly non-modular") or I'm missing something? Cheers Vladimir > > Yeah, it's not an obvious design pattern, I think someone will fix it up > someday... > > thanks, > > greg k-h > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation 2019-01-30 8:58 ` Vladimir Murzin @ 2019-01-30 9:24 ` Greg KH 2019-01-30 9:33 ` Vladimir Murzin 0 siblings, 1 reply; 8+ messages in thread From: Greg KH @ 2019-01-30 9:24 UTC (permalink / raw) To: Vladimir Murzin; +Cc: linux-arm-kernel, linux-serial, sudeep.holla On Wed, Jan 30, 2019 at 08:58:53AM +0000, Vladimir Murzin wrote: > On 1/30/19 8:27 AM, Greg KH wrote: > > On Fri, Jan 25, 2019 at 02:13:16PM +0000, Vladimir Murzin wrote: > >> Some designs, like MPS3, expose number of virtual serial ports which > >> already close or exceeds MPS2_MAX_PORTS. Increasing MPS2_MAX_PORTS > >> would have negative impact (in terms of memory consumption) on tiny > >> MPS2 platform which, in fact, has only one physically populated UART. > >> > >> Start with converting existent static port array to idr. As a bonus it > >> make driver not to fail in case when no alias was specified in device > >> tree. > >> > >> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> > >> --- > >> drivers/tty/serial/mps2-uart.c | 47 ++++++++++++++++++++++++++++-------------- > >> 1 file changed, 31 insertions(+), 16 deletions(-) > >> > >> diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c > >> index 9f8f637..6da0633 100644 > >> --- a/drivers/tty/serial/mps2-uart.c > >> +++ b/drivers/tty/serial/mps2-uart.c > >> @@ -22,6 +22,7 @@ > >> #include <linux/serial_core.h> > >> #include <linux/tty_flip.h> > >> #include <linux/types.h> > >> +#include <linux/idr.h> > >> > >> #define SERIAL_NAME "ttyMPS" > >> #define DRIVER_NAME "mps2-uart" > >> @@ -397,7 +398,7 @@ static const struct uart_ops mps2_uart_pops = { > >> .verify_port = mps2_uart_verify_port, > >> }; > >> > >> -static struct mps2_uart_port mps2_uart_ports[MPS2_MAX_PORTS]; > >> +static DEFINE_IDR(ports_idr); > > > > You forgot to call idr_destroy() when your code unloads :( > > Hmm, but code doesn't unload since ce87122911f8 ("serial: mps2-uart: make driver explicitly non-modular") > or I'm missing something? Ugh, ok, nevermind, I missed that, sorry. greg k-h _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation 2019-01-30 9:24 ` Greg KH @ 2019-01-30 9:33 ` Vladimir Murzin 0 siblings, 0 replies; 8+ messages in thread From: Vladimir Murzin @ 2019-01-30 9:33 UTC (permalink / raw) To: Greg KH; +Cc: linux-serial, linux-arm-kernel, sudeep.holla On 1/30/19 9:24 AM, Greg KH wrote: > On Wed, Jan 30, 2019 at 08:58:53AM +0000, Vladimir Murzin wrote: >> On 1/30/19 8:27 AM, Greg KH wrote: >>> On Fri, Jan 25, 2019 at 02:13:16PM +0000, Vladimir Murzin wrote: >>>> Some designs, like MPS3, expose number of virtual serial ports which >>>> already close or exceeds MPS2_MAX_PORTS. Increasing MPS2_MAX_PORTS >>>> would have negative impact (in terms of memory consumption) on tiny >>>> MPS2 platform which, in fact, has only one physically populated UART. >>>> >>>> Start with converting existent static port array to idr. As a bonus it >>>> make driver not to fail in case when no alias was specified in device >>>> tree. >>>> >>>> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> >>>> --- >>>> drivers/tty/serial/mps2-uart.c | 47 ++++++++++++++++++++++++++++-------------- >>>> 1 file changed, 31 insertions(+), 16 deletions(-) >>>> >>>> diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c >>>> index 9f8f637..6da0633 100644 >>>> --- a/drivers/tty/serial/mps2-uart.c >>>> +++ b/drivers/tty/serial/mps2-uart.c >>>> @@ -22,6 +22,7 @@ >>>> #include <linux/serial_core.h> >>>> #include <linux/tty_flip.h> >>>> #include <linux/types.h> >>>> +#include <linux/idr.h> >>>> >>>> #define SERIAL_NAME "ttyMPS" >>>> #define DRIVER_NAME "mps2-uart" >>>> @@ -397,7 +398,7 @@ static const struct uart_ops mps2_uart_pops = { >>>> .verify_port = mps2_uart_verify_port, >>>> }; >>>> >>>> -static struct mps2_uart_port mps2_uart_ports[MPS2_MAX_PORTS]; >>>> +static DEFINE_IDR(ports_idr); >>> >>> You forgot to call idr_destroy() when your code unloads :( >> >> Hmm, but code doesn't unload since ce87122911f8 ("serial: mps2-uart: make driver explicitly non-modular") >> or I'm missing something? > > Ugh, ok, nevermind, I missed that, sorry. No problem, I'll add a note about that in commit message ;) Thanks Vladimir > > greg k-h > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2] serial: mps2-uart: support combined tx and rx irq 2019-01-25 14:13 [PATCH 0/2] serial: mps2-uart: minor improvements Vladimir Murzin 2019-01-25 14:13 ` [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation Vladimir Murzin @ 2019-01-25 14:13 ` Vladimir Murzin 2019-01-30 9:00 ` Vladimir Murzin 1 sibling, 1 reply; 8+ messages in thread From: Vladimir Murzin @ 2019-01-25 14:13 UTC (permalink / raw) To: linux-serial; +Cc: linux-arm-kernel, sudeep.holla It turns out that some designs went for implementing only combined tx and rx interrupt, which is currently not supported by the driver. Support of combined irq is built on top of existent irq handlers and activated by the hint form device tree. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> --- drivers/tty/serial/mps2-uart.c | 89 ++++++++++++++++++++++++++++++------------ 1 file changed, 64 insertions(+), 25 deletions(-) diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c index 6da0633..e5fe764 100644 --- a/drivers/tty/serial/mps2-uart.c +++ b/drivers/tty/serial/mps2-uart.c @@ -66,11 +66,17 @@ #define MPS2_MAX_PORTS 3 +#define UART_PORT_COMBINED_IRQS BIT(0) + struct mps2_uart_port { struct uart_port port; struct clk *clk; - unsigned int tx_irq; + union { + unsigned int combined_irq; + unsigned int tx_irq; + }; unsigned int rx_irq; + unsigned int flags; }; static inline struct mps2_uart_port *to_mps2_port(struct uart_port *port) @@ -232,6 +238,17 @@ static irqreturn_t mps2_uart_txirq(int irq, void *data) return IRQ_HANDLED; } +static irqreturn_t mps2_uart_combinedirq(int irq, void *data) +{ + if (mps2_uart_rxirq(irq, data) == IRQ_HANDLED) + return IRQ_HANDLED; + + if (mps2_uart_txirq(irq, data) == IRQ_HANDLED) + return IRQ_HANDLED; + + return IRQ_NONE; +} + static irqreturn_t mps2_uart_oerrirq(int irq, void *data) { irqreturn_t handled = IRQ_NONE; @@ -275,26 +292,35 @@ static int mps2_uart_startup(struct uart_port *port) mps2_uart_write8(port, control, UARTn_CTRL); - ret = request_irq(mps_port->rx_irq, mps2_uart_rxirq, 0, - MAKE_NAME(-rx), mps_port); - if (ret) { - dev_err(port->dev, "failed to register rxirq (%d)\n", ret); - return ret; - } - - ret = request_irq(mps_port->tx_irq, mps2_uart_txirq, 0, - MAKE_NAME(-tx), mps_port); - if (ret) { - dev_err(port->dev, "failed to register txirq (%d)\n", ret); - goto err_free_rxirq; - } - ret = request_irq(port->irq, mps2_uart_oerrirq, IRQF_SHARED, MAKE_NAME(-overrun), mps_port); if (ret) { dev_err(port->dev, "failed to register oerrirq (%d)\n", ret); - goto err_free_txirq; + return ret; + } + + if (mps_port->flags & UART_PORT_COMBINED_IRQS) { + ret = request_irq(mps_port->combined_irq, mps2_uart_combinedirq, 0, + MAKE_NAME(-combined), mps_port); + if (ret) { + dev_err(port->dev, "failed to register combinedirq (%d)\n", ret); + goto err_free_oerrirq; + } + } else { + ret = request_irq(mps_port->rx_irq, mps2_uart_rxirq, 0, + MAKE_NAME(-rx), mps_port); + if (ret) { + dev_err(port->dev, "failed to register rxirq (%d)\n", ret); + goto err_free_oerrirq; + } + + ret = request_irq(mps_port->tx_irq, mps2_uart_txirq, 0, + MAKE_NAME(-tx), mps_port); + if (ret) { + dev_err(port->dev, "failed to register txirq (%d)\n", ret); + goto err_free_rxirq; + } } control |= UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP; @@ -303,10 +329,10 @@ static int mps2_uart_startup(struct uart_port *port) return 0; -err_free_txirq: - free_irq(mps_port->tx_irq, mps_port); err_free_rxirq: free_irq(mps_port->rx_irq, mps_port); +err_free_oerrirq: + free_irq(port->irq, mps_port); return ret; } @@ -320,8 +346,13 @@ static void mps2_uart_shutdown(struct uart_port *port) mps2_uart_write8(port, control, UARTn_CTRL); - free_irq(mps_port->rx_irq, mps_port); - free_irq(mps_port->tx_irq, mps_port); + if (mps_port->flags & UART_PORT_COMBINED_IRQS) { + free_irq(mps_port->combined_irq, mps_port); + } else { + free_irq(mps_port->rx_irq, mps_port); + free_irq(mps_port->tx_irq, mps_port); + } + free_irq(port->irq, mps_port); } @@ -511,6 +542,9 @@ static int mps2_of_get_port(struct platform_device *pdev, if (id < 0) return id; + if (of_property_read_bool(np, "arm,mps2-combined-irq-only")) + mps_port->flags |= UART_PORT_COMBINED_IRQS; + mps_port->port.line = id; return 0; @@ -529,11 +563,6 @@ static int mps2_init_port(struct platform_device *pdev, mps_port->port.mapbase = res->start; mps_port->port.mapsize = resource_size(res); - - mps_port->rx_irq = platform_get_irq(pdev, 0); - mps_port->tx_irq = platform_get_irq(pdev, 1); - mps_port->port.irq = platform_get_irq(pdev, 2); - mps_port->port.iotype = UPIO_MEM; mps_port->port.flags = UPF_BOOT_AUTOCONF; mps_port->port.fifosize = 1; @@ -552,6 +581,16 @@ static int mps2_init_port(struct platform_device *pdev, clk_disable_unprepare(mps_port->clk); + + if (mps_port->flags & UART_PORT_COMBINED_IRQS) { + mps_port->combined_irq = platform_get_irq(pdev, 0); + mps_port->port.irq = platform_get_irq(pdev, 1); + } else { + mps_port->rx_irq = platform_get_irq(pdev, 0); + mps_port->tx_irq = platform_get_irq(pdev, 1); + mps_port->port.irq = platform_get_irq(pdev, 2); + } + return ret; } -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] serial: mps2-uart: support combined tx and rx irq 2019-01-25 14:13 ` [PATCH 2/2] serial: mps2-uart: support combined tx and rx irq Vladimir Murzin @ 2019-01-30 9:00 ` Vladimir Murzin 0 siblings, 0 replies; 8+ messages in thread From: Vladimir Murzin @ 2019-01-30 9:00 UTC (permalink / raw) To: linux-serial; +Cc: linux-arm-kernel, sudeep.holla On 1/25/19 2:13 PM, Vladimir Murzin wrote: > It turns out that some designs went for implementing only combined tx > and rx interrupt, which is currently not supported by the driver. > Support of combined irq is built on top of existent irq handlers and > activated by the hint form device tree. > It seems that folks combine rx, tx and overrun interrupts, so I'll send v2 Cheers Vladimir _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-01-30 9:34 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-01-25 14:13 [PATCH 0/2] serial: mps2-uart: minor improvements Vladimir Murzin 2019-01-25 14:13 ` [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation Vladimir Murzin 2019-01-30 8:27 ` Greg KH 2019-01-30 8:58 ` Vladimir Murzin 2019-01-30 9:24 ` Greg KH 2019-01-30 9:33 ` Vladimir Murzin 2019-01-25 14:13 ` [PATCH 2/2] serial: mps2-uart: support combined tx and rx irq Vladimir Murzin 2019-01-30 9:00 ` Vladimir Murzin
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).