[GIT PULL] AB8500 Power and MFD related updates

[GIT PULL] AB8500 Power and MFD related updates

[Lee Jones]

The following changes since commit 6dbe51c251a327e012439c4772097a13df43c5b8:

  Linux 3.9-rc1 (2013-03-03 15:11:05 -0800)

are available in the git repository at:

  git://git.linaro.org/people/ljones/linux-3.0-ux500.git for-mfd-and-power

for you to fetch changes up to b09f86dbfc20d9420dac43dba016cb65b582c983:

  ab8500-charger: Do not use [delayed_]work_pending() (2013-03-07 12:35:59 +0800)

----------------------------------------------------------------
Daniel WILLERUD (1):
      mfd: ab8500-gpadc: Implemented suspend/resume

Dariusz Szymczak (1):
      mfd: ab8500-core: Hierarchical interrupt registers

Hakan Berg (3):
      ab8500-btemp: Filter btemp readings
      ab8500-fg: Allow capacity to raise from 1% when charging
      ab8500-charger: Add AB8505_USB_LINK_STATUS

Jonas Aaberg (3):
      mfd: ab8500-gpadc: Reread on failure
      mfd: ab8500-debug: Better error handling on crash
      mfd: ab8500-debug: Add wake-up info

Lee Jones (33):
      mfd: ab8500-gpadc: Add gpadc hw conversion
      mfd: ab8500-core: APE Interrupts are not cleared
      mfd: ab8500-debug: Function to save all ABB registers to mem
      mfd: ab8500-core: Add ADC support for ab8540
      mfd: ab8500-core: Rework MFD sub-device initialisation structures
      mfd: ab8500-core: Add Interrupt support for ab8540
      mfd: ab8500-debugfs: Add tests for ab8540 based platform initialisations
      mfd: ab8500-debug: Add support for ab8505 and ab9540
      mfd: ab8500-sysctrl: Add new reset function
      mfd: ab8500-gpadc: Add support for the AB8540
      mfd: ab8500-debug: Add support for the AB8540
      mfd: ab8500-gpadc: Optimise GPADC driver
      mfd: ab8500-core: Add additional resources to ab8505_iddet_resources
      mfd: ab8500-debugfs: Dump sim registers
      mfd: ab8500-debug: Add ADC input channel usb_id in debugfs
      mfd: ab8500-debugfs: Change AB8500 debug permissions
      mfd: ab8500-debug: Add register map for ab8540.
      mfd: ab8500-debugfs: Trivially beautify the debugfs driver
      pm2301_charger: Remove __exit, __init and __devexit_p()
      abx500-chargalg: Store the AB8500 MFD parent device for platform differentiation
      ab8500-fg: Add power cut feature for ab8505 and ab8540
      ab8500-charger: Trivial coding style changes
      ab8500-bm: Quick re-attach charging behaviour
      ab8500-bm: Charge only mode fixes for the ab9540
      ab8500_charger: Prevent auto drop of VBUS
      ab8500-bm: Add usb power path support
      ab8500-bm: Add support for the new ab8540 platform
      abx500-chargalg: Prevent the watchdog from being kicked twice
      ab8500-chargalg: Use hrtimer
      pm2301-charger: Add pm_runtime_resume & pm_runtime_suspend
      ab8500-charger: Remove duplicate code
      abx500-chargalg: Add charging current step interface
      ab8500-charger: Do not use [delayed_]work_pending()

Linus Walleij (1):
      mfd: ab8500-debug: Add explicit dependencies

M BenZoubeir (1):
      pm2301-charger: Adjust interrupt handler behavior

Marcus Cooper (4):
      pm2301-charger: Always compile the PM2301 Charger driver with AB8500 Battery Mgnt
      ab8500-charger: Use USBLink1Status Register
      ab8500-charger: Add UsbLineCtrl2 reference
      ab8500-bm: Trivially fix up some incorrect and out-of-date comments

Marcus Danielsson (1):
      mfd: ab8500-sysctrl: Error check clean up

Martin Bergstrom (1):
      ab8500-fg: Report unscaled capacity

Mattias Wallin (2):
      mfd: ab8500-debug: Print banks in hex
      mfd: ab8500-core: Show turn on status at boot

Mustapha Ben Zoubeir (1):
      pm2301-charger: Resolve I2C detection problem on ab9540

Per Forlin (1):
      pm2301-charger: Force main charger detect

Rabin Vincent (2):
      mfd: ab8500-sysctrl: AB8505 doesn't have SYSCLKREQ5..8
      ab8500-charger: Run detect workaround only on AB8500

Rajkumar Kasirajan (2):
      mfd: ab8500-sysctrl: Update correct turn on status
      pm2301-charger: Enable SW EOC control on the ab9540

Rupesh Kumar (8):
      pm2301-charger: Support for over voltage protection on the ab9540
      pm2301-charger: Die temp thermal protection
      pm2301-charger: Wake system when ext charger is plugged-in
      ab8500-btemp: Defer btemp filtering while initialising
      pm2301-charger: Removed unused code from PM2301 driver
      pm2301-charger: Charging LED control for pm2301
      pm2301-charger: Wake device on register access
      pm2301-charger: Reference put missing after access

Ulf Hansson (1):
      mfd: ab8500-core: Add abx500-clk as an mfd child device

Yang QU (1):
      ab8500-charger: Add backup battery charge voltages on the ab8540

lme00437 (2):
      pm2301-charger: lpn pin used only in C2C boards
      ab8500-fg: Change current calculation

srinidhi kasagar (2):
      mfd: ab8500-debug: Convert to kstrtoul_from_user
      abx500-chargalg: Use module_platform_driver() rather

 drivers/mfd/ab8500-core.c                 |  544 ++++++++++++++++++++++++---------
 drivers/mfd/ab8500-debugfs.c              | 2559 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------------
 drivers/mfd/ab8500-gpadc.c                |  560 +++++++++++++++++++++++++++-------
 drivers/mfd/ab8500-sysctrl.c              |   98 +++++-
 drivers/power/Kconfig                     |    7 -
 drivers/power/Makefile                    |    3 +-
 drivers/power/ab8500_bmdata.c             |   96 +++++-
 drivers/power/ab8500_btemp.c              |   75 ++++-
 drivers/power/ab8500_charger.c            |  699 ++++++++++++++++++++++++++++++------------
 drivers/power/ab8500_fg.c                 |  497 +++++++++++++++++++++++++++++-
 drivers/power/abx500_chargalg.c           |  455 +++++++++++++++++++--------
 drivers/power/pm2301_charger.c            |  371 ++++++++++++++++------
 drivers/power/pm2301_charger.h            |   23 +-
 include/linux/mfd/abx500.h                |   21 +-
 include/linux/mfd/abx500/ab8500-bm.h      |   60 +++-
 include/linux/mfd/abx500/ab8500-gpadc.h   |   74 +++--
 include/linux/mfd/abx500/ab8500-sysctrl.h |    6 +
 include/linux/mfd/abx500/ab8500.h         |    3 +
 include/linux/mfd/abx500/ux500_chargalg.h |    7 +
 include/linux/pm2301_charger.h            |    2 +-
 20 files changed, 4835 insertions(+), 1325 deletions(-)

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[GIT PULL] AB8500 Power and MFD related updates

[Anton Vorontsov]

On Thu, Mar 07, 2013 at 12:38:59PM +0800, Lee Jones wrote:
> The following changes since commit 6dbe51c251a327e012439c4772097a13df43c5b8:
> 
>   Linux 3.9-rc1 (2013-03-03 15:11:05 -0800)
> 
> are available in the git repository at:
> 
>   git://git.linaro.org/people/ljones/linux-3.0-ux500.git for-mfd-and-power

Pulled, thanks a lot!

Anton

[GIT PULL] AB8500 Power and MFD related updates

[Samuel Ortiz]

Hi Lee,

On Thu, Mar 07, 2013 at 12:38:59PM +0800, Lee Jones wrote:
> The following changes since commit 6dbe51c251a327e012439c4772097a13df43c5b8:
> 
>   Linux 3.9-rc1 (2013-03-03 15:11:05 -0800)
> 
> are available in the git repository at:
> 
>   git://git.linaro.org/people/ljones/linux-3.0-ux500.git for-mfd-and-power
I was expecting to get an MFD only branch (Basically what your for-mfd branch
looks like, and then the for-mfd-and-power one to be based on the mfd only
with the power patches applied on top of it.
Now, I have to pull the power patches as well, which is no big deal but not
ideal neither.
Anyway, I pulled this branch into mfd-next, with a tiny conflict.

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/

[GIT PULL] AB8500 Power and MFD related updates

[Lee Jones]

Hi Sam,

> > The following changes since commit 6dbe51c251a327e012439c4772097a13df43c5b8:
> > 
> >   Linux 3.9-rc1 (2013-03-03 15:11:05 -0800)
> > 
> > are available in the git repository at:
> > 
> >   git://git.linaro.org/people/ljones/linux-3.0-ux500.git for-mfd-and-power
> I was expecting to get an MFD only branch (Basically what your for-mfd branch
> looks like, and then the for-mfd-and-power one to be based on the mfd only
> with the power patches applied on top of it.
> Now, I have to pull the power patches as well, which is no big deal but not
> ideal neither.

Sorry Sam, I guess I understood you differently:

"I can Ack the MFD parts, they look good to me. And then you can take
the whole thing through your tree, but I'd prefer you to do so by
pulling the branch Lee prepared for us. I want to avoid conflicts this
way."

When you said you wanted the "whole thing" to go through Anton's Tree,
I thought that's what you meant?

> Anyway, I pulled this branch into mfd-next, with a tiny conflict.

Okay, that's good.

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[GIT PULL] AB8500 Power and MFD related updates

[Samuel Ortiz]

On Mon, Apr 08, 2013 at 10:33:03AM +0100, Lee Jones wrote:
> > > The following changes since commit 6dbe51c251a327e012439c4772097a13df43c5b8:
> > > 
> > >   Linux 3.9-rc1 (2013-03-03 15:11:05 -0800)
> > > 
> > > are available in the git repository at:
> > > 
> > >   git://git.linaro.org/people/ljones/linux-3.0-ux500.git for-mfd-and-power
> > I was expecting to get an MFD only branch (Basically what your for-mfd branch
> > looks like, and then the for-mfd-and-power one to be based on the mfd only
> > with the power patches applied on top of it.
> > Now, I have to pull the power patches as well, which is no big deal but not
> > ideal neither.
> 
> Sorry Sam, I guess I understood you differently:
> 
> "I can Ack the MFD parts, they look good to me. And then you can take
> the whole thing through your tree, but I'd prefer you to do so by
> pulling the branch Lee prepared for us. I want to avoid conflicts this
> way."
I realize this was not very clear from me, sorry.
I meant I'm fine with Anton taking the whole thing, but by pulling from what
is your current for-mfd-and-power branch. Anton did that and that's all good.
Now, to prevent being flamed to death by Linus, I need to carry the MFD
patches from this branch as well, and that should have come from a common
for-mfd branch.
Basically, what I had in mind:

- You create a for-mfd branch with all the MFD patches need for the
  power patches to be applied properly.
- You create a for-mfd-and-power branch, where you first merge your for-mfd
  branch and then apply the power patches.
- Anton pulls from for-mfd-and-power.
- I pull from for-mfd.
- Anton and me carry the exact same set of MFD patches and regardless of who
  Linus pulls from first, it should work fine.

That should still work from your for-mfd-and-power branch, just slightly
less clean imo, as I will carry power patches I really don't need.

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/