N900 device tree conversion: how to do first step

[pavel@ucw.cz (Pavel Machek)]

Hi!

I'd like to convert Nokia N900 to device tree.

Unfortunately, serial port is not easily available (very special cable
would be needed, does someone know where to get one?) and I don't have
BDI (and very special cable would be needed, too).

So I tried doing very small first step, hoping that I get booting
system... obviously I did not.

I tried formally switching to device tree while still booting using
hardcoded functions. No luck. Does anyone see what I did wrong?

Is it possible that n900 has its main memory somewhere else than
0x80000000?

Thanks,
									Pavel

diff --git a/.config b/.config
index a36bbe2..130a7a8 100644
--- a/.config
+++ b/.config
@@ -498,11 +498,11 @@ CONFIG_ATAGS=y
 # CONFIG_DEPRECATED_PARAM_STRUCT is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-# CONFIG_ARM_APPENDED_DTB is not set
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw mtdoops.mtddev=log console=tty0 console=ttyO2"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_CMDLINE_EXTEND is not set
-# CONFIG_CMDLINE_FORCE is not set
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y
+CONFIG_CMDLINE=""
 CONFIG_KEXEC=y
 CONFIG_ATAGS_PROC=y
 # CONFIG_CRASH_DUMP is not set
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9c62558..7b1a075 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -119,6 +119,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
+	omap3-n900.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
new file mode 100644
index 0000000..e093543
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+/* FIXME: "omap3.dtsi" */
+
+/ {
+	model = "Nokia N900";
+	compatible = "nokia,omap3-n900", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+};
+
+/*
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+*/
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 74f83a5..f857b5b 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -36,6 +36,8 @@
 
 #define RX51_GPIO_SLEEP_IND 162
 
+/* This lights up left part of keyboard */
+
 static struct gpio_led gpio_leds[] = {
 	{
 		.name	= "sleep_ind",
@@ -119,21 +121,21 @@ static void __init rx51_init(void)
 	platform_device_register(&leds_gpio);
 }
 
-static void __init rx51_reserve(void)
-{
-	omap_reserve();
-}
+static const char *omap3_boards_compat[] __initdata = {
+	"nokia,omap3-n900",
+        NULL,
+};
 
-MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
-	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
-	.atag_offset	= 0x100,
-	.reserve	= rx51_reserve,
+DT_MACHINE_START(N900_DT, "Nokia N900 (Flattened Device Tree)")
+	.atag_offset    = 0x100,
+	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= rx51_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
+	.init_early     = omap3430_init_early,
+	.init_irq       = omap3_init_irq, /* FIXME: omap_intc_of_init, */
+	.handle_irq     = omap3_intc_handle_irq,
+	.init_machine   = rx51_init, /* FIXME: omap_generic_init, */
+	.init_late      = omap3430_init_late, /* FIXME: omap3_init_late, */
+	.init_time      = omap3_sync32k_timer_init,
+	.dt_compat      = omap3_boards_compat,
+	.restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/mkit b/mkit
index 354610c..e9ffc02 100755
--- a/mkit
+++ b/mkit
@@ -1,3 +1,4 @@
 #!/bin/bash
 ARCH=arm time make -j 3 && \
-    sudo ../maemo/0xffff/src/0xFFFF -m arch/arm/boot/zImage -l -b 'root=/dev/mmcblk0p6 rootwait'
\ No newline at end of file
+    cat arch/arm/boot/zImage arch/arm/boot/dts/omap3-n900.dtb > zImage_dtb && \
+    sudo ../maemo/0xffff/src/0xFFFF -m zImage_dtb -l -b 'root=/dev/mmcblk0p6 rootwait'
\ No newline at end of file


 
 
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html