Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: pavel@ucw.cz (Pavel Machek)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] N900: add device tree
Date: Sat, 10 Aug 2013 13:09:56 +0200
Message-ID: <20130810110955.GA11437@amd.pavel.ucw.cz> (raw)
In-Reply-To: <20130801234355.GA15611@amd.pavel.ucw.cz>

On Fri 2013-08-02 01:43:55, Pavel Machek wrote:
> On Sun 2013-07-28 15:44:09, Pavel Machek wrote:
> > On Mon 2013-07-15 01:28:19, Aaro Koskinen wrote:
> > > Hi,
> > > 
> > > On Sat, Jul 13, 2013 at 02:17:09PM +0200, Pavel Machek wrote:
> > > > 
> > > > This adds device tree with neccessary support to boot with functional
> > > > video (on both emulator and real N900 device).
> > > > 
> > > > Signed-off-by: Pavel Machek <pavel@ucw.cz>
> > > 
> > > You can also add:
> > > 
> > > Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
> > 
> > Benoit, could you apply this? Tony said you are doing dts changes, and
> > the patch seems to be ready.
> 
> Tony, Benoit was apparently abducted by aliens or something. Is there
> chance you could take the patch?

Hello, is there anybody out there?

There's nice and simple patch enabling device tree on n900, it is even
reviewed by Aaro, and it is neither applied nor are negative comments
coming? ...for a month...?

Tony also seen the patch and comment was "Benoit takes these", so I
assume it looks basically ok. 

Benoit, you are supposed to maintain device tree for omap2. 

[I wonder if this is clean-enough cause for "trivial in resubmit
mode?]
								Pavel
---

This adds device tree with neccessary support to boot with functional
video (on both emulator and real N900 device).

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>

---

>From v1: Aaro wants just GPLv2, so I did that. I re-enabled parts that
can be enabled on 3.10, and tested it on that kernel.

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f0895c5..1950aed 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -141,6 +141,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-devkit8000.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
+	omap3-n900.dtb \
 	omap3-tobi.dtb \
 	omap3-igep0020.dtb \
 	omap3-igep0030.dtb \
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
new file mode 100644
index 0000000..fb461bf
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
+ * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/include/ "omap34xx.dtsi"
+
+/ {
+	model = "Nokia N900";
+	compatible = "nokia,omap3-n900", "ti,omap3";
+
+	cpus {
+		cpu at 0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+};
+
+&i2c1 {
+	clock-frequency = <2200000>;
+
+	twl: twl at 48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&twl_gpio {
+	ti,pullups	= <0x0>;
+	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mcspi1 {
+	// For some reason, touchscreen is neccessary for screen to work at 
+	// all on real hw. It works well without it on emulator.
+	//
+	// Also... order in the device tree actually matters here.
+	tsc2005 at 0 {
+		compatible = "tsc2005";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+	};
+	mipid at 2 {
+		compatible = "acx565akm";
+		spi-max-frequency = <6000000>;
+		reg = <2>;
+		// turbo_mode = 0,
+		// cs_per_word = 0
+	};
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	mode = <2>;
+	power = <50>;
+};

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

  reply index

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-09  1:59 N900 device tree conversion: how to do first step Pavel Machek
2013-06-09  9:24 ` Pali Rohár
2013-06-09 16:47   ` Pavel Machek
2013-06-09 17:03     ` Pali Rohár
2013-06-09 17:30 ` Pavel Machek
2013-06-09 20:11 ` Aaro Koskinen
2013-06-13 13:26   ` Pavel Machek
2013-06-13 14:10     ` Tony Lindgren
2013-06-13 14:28       ` Pavel Machek
2013-06-13 14:57         ` Tony Lindgren
2013-06-13 15:52           ` Pavel Machek
2013-06-13 16:14             ` Tony Lindgren
2013-06-13 23:08               ` Pavel Machek
2013-06-14  5:56                 ` Tony Lindgren
2013-06-14 21:28                   ` Pavel Machek
2013-06-17 11:10                     ` Tony Lindgren
2013-07-01 14:03                       ` [PATCH] N900: fix operation on emulator Pavel Machek
2013-07-01 18:22                         ` Sergei Shtylyov
2013-07-01 19:51                           ` Pavel Machek
2013-07-01 20:00                             ` Sergei Shtylyov
2013-07-01 20:53                           ` Pavel Machek
2013-07-01 21:15                       ` [PATCH] N900: enable N900-specific drivers even if device tree is enabled Pavel Machek
2013-07-04 11:47                         ` Tony Lindgren
2013-07-01 21:17                       ` [PATCH] N900: add device tree Pavel Machek
2013-07-04 17:19                         ` Aaro Koskinen
2013-07-04 20:21                           ` Pavel Machek
2013-07-04 20:32                             ` Aaro Koskinen
2013-07-13 12:17                               ` [PATCH v2] " Pavel Machek
2013-07-14 22:28                                 ` Aaro Koskinen
2013-07-28 13:44                                   ` Pavel Machek
2013-08-01 23:43                                     ` Pavel Machek
2013-08-10 11:09                                       ` Pavel Machek [this message]
2013-08-10 11:27                                         ` [PATCH] ARM: dts: omap3 / n900 support, Benoit please take me (was Re: [PATCH v2] N900: add device tree) Pavel Machek
2013-08-10 11:46                                         ` [PATCH v2] N900: add device tree Belisko Marek
2013-08-10 20:29                                           ` Jiri Kosina
2013-08-11  0:55                                             ` OMAP device tree maintainance (was Re: [PATCH v2] N900: add device tree) Pavel Machek
2013-08-11 11:50                                             ` [PATCH v2] N900: add device tree Javier Martinez Canillas
2013-08-11 13:47                                               ` Pavel Machek
2013-08-12  7:37                                                 ` Tony Lindgren
2013-08-12  7:36                                             ` Tony Lindgren
2013-08-11 15:02                                 ` Javier Martinez Canillas
2013-08-13 10:50                                   ` Benoit Cousson
2013-08-13 13:36                                     ` [PATCH v3] " Pavel Machek
2013-08-13 14:06                                       ` Benoit Cousson
2013-07-19 18:14 ` N900 device tree conversion: how to do first step Sebastian Reichel
2013-07-28 13:37   ` Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130810110955.GA11437@amd.pavel.ucw.cz \
    --to=pavel@ucw.cz \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git