From: mark.rutland@arm.com (Mark Rutland)
To: linux-arm-kernel@lists.infradead.org
Subject: Kexec on arm64
Date: Thu, 24 Jul 2014 10:13:22 +0100 [thread overview]
Message-ID: <20140724091322.GB4079@leverpostej> (raw)
In-Reply-To: <CAFdej03nixSU=3h+HYk2E3Onb2P3--Di0GM+wCwLS6ZNH7UjEQ@mail.gmail.com>
[...]
> 2) Rebooting
> #########################
> # kexec -e
> kexec version: 1kvm: exiting hardware virtualization
> 4.07.17.12.17-gbStarting new kernel
> 6cccb4
> Ump_spin_tanblaeb_lcpeu_d ite:127: oi dh:a n7d,l holding count: 0e
> kernel NULL pointer dereference at virtual address 00000291
> smp_spin_Itnaibtlei_cpaul_diie:12z7:i nigd :c 3g,r oholding couunpt :s 0u
Hmm. This looks like two threads/CPUs are outputting characters at the
same time, something like "smp_spin_table_die" and "Initial cpu" seem to
be interspersed.
Mark.
> bsys cpu
> smpL_isnpuixn _table_cpu_diev:e1r2s7i:o ni d: 6, hol3d.i1n6g. 0c-orucnt: 0
> 4+ (arun at arun-OptiPlex-9010) (gcc version 4.9.1 20140505 (prerelease)
> (crosstool-NG linaro-1.13.1-4.9-2014.05 - Linaro GCC 4.9-2014.05) )
> #25 SMP smp_sPpin_tablReE_EcMpPuT_ dTie:127: iude: J5u, hlo ld2ing
> coun2:
> 37:03 IST 2014
> smp_Cspin_tPabUl:e _AcApruc_die:127: id: h46,4 hPorldiong count:c e0s
> or [500f0000] revision 0
> smp_speifni_:t aGbeltet_cpu_die:i1n2g7 : ipd:a 2, holdinrga mceount:t e0
> rs from FDT:
> smep_fsip:i nC_atable_cpu_dien:'1t27: i df: 1i, holdinngd cSoyusntt:e 0
> m Table in device tree!
> macchimne_kexaec:: 572C: smp_pMrAo:c efsasiorl_ied = 0
> d to reserve 16 MiB
> dachine_kexecO:n5 7n4o:
> e 0 totalpages: 4194304
> a k e xec image inNfoor:m
> l zone: 57344 pages used for memmap
> type: 0
> z sta r tN:o r m4a0000800l04
> one: 4194304 pages, LIFO batch:31
> head: P E R 43Cea9bPf002
> U: Embedded 11 pages/cpu @ffffffc3fff7d000 s13120 r8192 d23744 u45056
> nrp_cspeug-maelnltosc: 2
> : s13120 r8192 d23744 u45056 alloc=11*4096
> p c p usegment-[a0l]l:o c0:0 0[0000400]00 800 000[ -0 ]0000004000
> 881c 0[000], 280c000h bytes, [200]6 0 3pages
> [0] 4 [0] 5 [0] 6 [0] 7
> eexBeuc_is_dtb:1i1l5:t m1a gizc: 0 : 0 : noon
> lists in Zone order, mobility grouping on. Total pages: 4136960
> / K e r segment[1]: n0e0l0 00c0o400m08a0000 m-a n0d00
> 00040l008ai30n00e,: 3r000ho obty=tes, 3/ dpeagesv
> nfs rw nfsroot=10.162.103.228:/nfs_root/dora_june_6/apm-image-minimal-mustangbe
> ip=10.162.103.21:10.162.103.228:10.162.103.1:255.255.255.0:mustangk:eextehc_0is:_odtb:1f15f:
> pmaangic:i 0c =: 0 : 1no
> console=ttyS0,115200 earlyprintk=uart8250-32bit,0x1c020000 debug
> maxcpus=8 swiotlb=65536 log_buf_len=1M
> 8aclhinoeg_kex_ec:582: cobnturfo_ll_ecode_page: nf:f f1ff0fbc4edb67ee8
> 576
> 6achinee_akrelxyec: 58l4: reobogo tb_ucfo dfe_buffer_physr:e e :0
> 000010435eaffb00007
> (92%)
> macPhine_IkDexec:58 6h:a srehb otot_acode_bufferb:l e e n t
> rfifffffce3se:a f4f0b000
> 96 (order: 3, 32768 bytes)
> macDhine_kexeecn:t5r88: ryel occate_neaw_ckheer nelh:a s fffffhf
> c0t0a0093b18
> ble entries: 2097152 (order: 12, 16777216 bytes)
> machineI_kneoxedc:5e90-: relocate_cnaecwh_ek ehransel_size: b8hh( 1t84)a bytes
> ble entries: 1048576 (order: 11, 8388608 bytes)
> machinMe_keemxoercy::5 913: kexec6_5d0t8b_6addr2:4 K
> 0/0100004600708a0000
> 77216K available (4360K kernel code, 299K rwdata, 1528K rodata, 6556K
> init, 202K bss, 268592K reserved)
> oacVhinei_kretxueacl: 595: kexec_kkeirmnaegle _mhead: e m o r0y0
> 00l0043eaa9bf002y
> ut:
> vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
> vmemmap : 0xffffffbce0000000 - 0xffffffbcee000000 ( 224 MB)
> 0 machine_ kmeoxdecu:l597:e kexecs_ k:i m0age_xsftarft: f f
> f0f0b0f0f0c04000080004
> 00000 - 0xffffffc000000000 ( 64 MB)
> memory : 0xffffffc000000000 - 0xffffffc400000000 ( 16384 MB)
> .init : 0xffffffc000642000 -machine_ke x0excf:f5f99:f
> kexec_efntfrcy0_0d0ump:
> ca9340 ( 6557 kB)
> .text : 0xffffffc000080000 - 0xffffffc0006411c4 ( 5893 kB)
> f .data : 0xffffffc000caa000 - 0xffffffc000cf4f28 (I
> 43ea9bf002 = 343ea9b0f000 (f0fffffc 3ekaB9)b
> 000)
> d D 40S0LU00B8:0 0H0W1 = a4000080000l i(gfnf=f6f4ffc,00008000 0O)r
> ######################
>
> This doesn't seems to be working. Random behaviors are observed. Some
> times it rebooted to u-boot
> prompt. Sometimes kernel soft resets itself in an endless loop
> (bootlog is repeating over and over again)
>
> To debug what is happening I put a while(1) just before jumping into
> kexec reboot code.
>
> diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
> index 31cba91..8843623 100644
> --- a/arch/arm64/kernel/process.c
> +++ b/arch/arm64/kernel/process.c
> @@ -85,6 +85,7 @@ void soft_restart(unsigned long addr)
>
> smp_secondary_shutdown();
>
> + while(1);
> /* Switch to the identity mapping */
> phys_reset = (phys_reset_t)virt_to_phys(cpu_reset);
> phys_reset(addr);
>
> I break into target with BDI3000 now; and see the below output
>
> TARGET#0>state
> Core#0: halted 0xffffffc000085240 External Debug Request
> Core#1: halted 0x0000004000080394 External Debug Request
> Core#2: halted 0x0000004000080394 External Debug Request
> Core#3: halted 0x0000004000080394 External Debug Request
> Core#4: halted 0xffffffc0000802f8 External Debug Request
> Core#5: halted 0x0000004000080394 External Debug Request
> Core#6: halted 0xffffffc0000802f8 External Debug Request
> Core#7: halted 0x0000004000080394 External Debug Request
>
> I think some of the secondary CPUs are not behaving as expected;
> As of now I don't have any clues for this.
>
>
> --Arun
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
prev parent reply other threads:[~2014-07-24 9:13 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CAFdej006OSyhgDcJ2iZdbjt+PtysN=i_+9Dr4GTmr=+t5yg4Kw@mail.gmail.com>
2014-07-15 17:04 ` Kexec on arm64 Geoff Levand
2014-07-16 17:57 ` Feng Kan
2014-07-16 23:04 ` Geoff Levand
2014-07-22 9:44 ` Arun Chandran
2014-07-22 13:25 ` Arun Chandran
2014-07-24 0:38 ` Geoff Levand
2014-07-24 9:36 ` Mark Rutland
2014-07-24 12:49 ` Arun Chandran
2014-07-25 0:17 ` Geoff Levand
2014-07-25 10:31 ` Arun Chandran
2014-07-25 10:36 ` Mark Rutland
2014-07-25 11:48 ` Arun Chandran
2014-07-25 12:14 ` Mark Rutland
2014-07-25 15:29 ` Arun Chandran
2014-07-26 0:18 ` Geoff Levand
2014-07-28 15:00 ` Arun Chandran
2014-07-28 15:38 ` Mark Rutland
2014-07-29 0:09 ` Geoff Levand
2014-07-29 9:10 ` Mark Rutland
2014-07-29 12:32 ` Arun Chandran
2014-07-29 13:35 ` Mark Rutland
2014-07-29 21:19 ` Geoff Levand
2014-07-30 7:22 ` Arun Chandran
2014-08-01 11:13 ` Arun Chandran
2014-08-03 14:47 ` Mark Rutland
2014-08-04 10:16 ` Arun Chandran
2014-08-04 11:35 ` Mark Rutland
2014-08-07 0:40 ` Geoff Levand
2014-08-07 9:59 ` Mark Rutland
2014-08-07 17:09 ` Geoff Levand
2014-08-04 17:21 ` Geoff Levand
2014-08-06 13:54 ` Arun Chandran
2014-08-06 15:51 ` Arun Chandran
2014-08-07 20:07 ` Geoff Levand
2014-08-08 5:46 ` Arun Chandran
2014-08-08 10:03 ` Arun Chandran
2014-08-12 5:42 ` Arun Chandran
2014-08-13 11:09 ` Arun Chandran
2014-08-26 22:32 ` Geoff Levand
2014-08-27 4:56 ` Arun Chandran
2014-07-30 5:46 ` Arun Chandran
2014-07-30 9:16 ` Mark Rutland
2014-07-30 7:01 ` Arun Chandran
2014-07-25 10:26 ` Arun Chandran
2014-07-25 11:29 ` Mark Rutland
2014-07-24 11:50 ` Arun Chandran
2014-07-30 3:26 ` Feng Kan
2014-07-24 0:10 ` Geoff Levand
2014-07-24 9:13 ` Mark Rutland [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140724091322.GB4079@leverpostej \
--to=mark.rutland@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).