From: lkp@intel.com (kbuild test robot)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/5] drivers: usb: chipidea: Add qoriq platform driver
Date: Sat, 9 Jul 2016 13:59:29 +0800 [thread overview]
Message-ID: <201607091350.FGiCmJsm%fengguang.wu@intel.com> (raw)
In-Reply-To: <1468038656-10345-2-git-send-email-rajesh.bhagat@nxp.com>
Hi,
[auto build test WARNING on phy/next]
[also build test WARNING on v4.7-rc6 next-20160708]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Rajesh-Bhagat/drivers-usb-chipidea-Add-qoriq-platform-driver/20160709-130557
base: https://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git next
config: blackfin-allmodconfig (attached as .config)
compiler: bfin-uclinux-gcc (GCC) 4.6.3
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=blackfin
All warnings (new ones prefixed by >>):
drivers/usb/chipidea/ci_hdrc_qoriq.c: In function 'ci_hdrc_qoriq_usb_setup':
>> drivers/usb/chipidea/ci_hdrc_qoriq.c:85:2: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'resource_size_t' [-Wformat]
drivers/usb/chipidea/ci_hdrc_qoriq.c:85:2: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 5 has type 'resource_size_t' [-Wformat]
vim +85 drivers/usb/chipidea/ci_hdrc_qoriq.c
69 clk_disable_unprepare(data->clk);
70 }
71
72 static int ci_hdrc_qoriq_usb_setup(struct platform_device *pdev)
73 {
74 u32 reg;
75 struct resource *res;
76 struct device *dev = &pdev->dev;
77 struct ci_hdrc_qoriq_data *data = platform_get_drvdata(pdev);
78
79 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
80 if (!res) {
81 dev_err(dev, "failed to get I/O memory\n");
82 return -ENOENT;
83 }
84
> 85 dev_dbg(dev, "res->start %llx, resource_size(res) %llx\n", res->start,
86 resource_size(res));
87 data->qoriq_regs = devm_ioremap(dev, res->start, resource_size(res));
88 if (IS_ERR(data->qoriq_regs)) {
89 dev_err(dev, "failed to remap I/O memory\n");
90 return -ENOMEM;
91 }
92
93 data->phy_mode = of_usb_get_phy_mode(pdev->dev.of_node);
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/octet-stream
Size: 40629 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160709/ca0e5ac7/attachment-0001.obj>
next prev parent reply other threads:[~2016-07-09 5:59 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1468038656-10345-1-git-send-email-rajesh.bhagat@nxp.com>
[not found] ` <1468038656-10345-2-git-send-email-rajesh.bhagat@nxp.com>
2016-07-09 5:53 ` [PATCH v2 1/5] drivers: usb: chipidea: Add qoriq platform driver kbuild test robot
2016-07-09 5:59 ` kbuild test robot [this message]
2016-07-09 6:13 ` kbuild test robot
2016-07-11 6:43 ` Peter Chen
2016-07-12 3:59 ` Rajesh Bhagat
2016-07-15 7:13 ` Peter Chen
2016-07-15 8:13 ` Rajesh Bhagat
[not found] ` <1468038656-10345-3-git-send-email-rajesh.bhagat@nxp.com>
2016-07-11 6:48 ` [PATCH v2 2/5] usb: DT binding documentation for qoriq usb 2.0 controller Peter Chen
2016-07-12 3:59 ` Rajesh Bhagat
2016-07-15 7:15 ` Peter Chen
2016-07-15 8:13 ` Rajesh Bhagat
2016-07-16 0:28 ` Rob Herring
[not found] ` <1468038656-10345-4-git-send-email-rajesh.bhagat@nxp.com>
2016-07-11 6:54 ` [PATCH v2 3/5] drivers: usb: phy: Add qoriq usb 2.0 phy driver support Peter Chen
2016-07-12 3:59 ` Rajesh Bhagat
[not found] ` <1468038656-10345-5-git-send-email-rajesh.bhagat@nxp.com>
2016-07-16 0:35 ` [PATCH v2 4/5] phy: DT binding documentation for qoriq usb 2.0 phy Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201607091350.FGiCmJsm%fengguang.wu@intel.com \
--to=lkp@intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).