[PATCH v2 2/5] usb: DT binding documentation for qoriq usb 2.0 controller

[rajesh.bhagat@nxp.com (Rajesh Bhagat)]

> -----Original Message-----
> From: Peter Chen [mailto:hzpeterchen at gmail.com]
> Sent: Monday, July 11, 2016 12:19 PM
> To: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> Cc: linux-usb at vger.kernel.org; linux-kernel at vger.kernel.org;
> devicetree at vger.kernel.org; Peter Chen <peter.chen@nxp.com>;
> gregkh at linuxfoundation.org; kishon at ti.com; robh+dt at kernel.org;
> shawnguo at kernel.org; linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH v2 2/5] usb: DT binding documentation for qoriq usb 2.0
> controller
> 
> On Sat, Jul 09, 2016 at 10:00:53AM +0530, Rajesh Bhagat wrote:
> > Describes the qoriq usb 2.0 controller driver binding, currently used
> > for LS1021A and LS1012A platform.
> >
> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> > ---
> > Changes in v2:
> >  - Adds DT binding documentation for qoriq usb 2.0 controller
> >  - Changed the compatible string to fsl,ci-qoriq-usb2
> >
> >  .../devicetree/bindings/usb/ci-hdrc-qoriq.txt      | 34
> ++++++++++++++++++++++
> >  1 file changed, 34 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt
> >
> > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt
> > b/Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt
> > new file mode 100644
> > index 0000000..8ad7306
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt
> > @@ -0,0 +1,34 @@
> > +* Freescale QorIQ SoC USB 2.0 Controllers
> > +
> > +Required properties:
> > +- compatible: Should be "fsl,ci-qoriq-usb2"
> > +  Wherever applicable, the IP version of the USB controller should
> > +  also be mentioned (for eg. fsl,ci-qoriq-usb2-vX.Y).
> > +  where, X.Y is IP version of USB controller.

Hello Peter, 

> 
> Why you need to add IP version at compatible string?
> Does it can't be read out from ID register of Identification Registers.
> 

I agree. Will drop this controller version thing in DTS in v3.

> > +- reg: Should contain registers location and length
> > +- interrupts: Should contain controller interrupt
> > +- phy-names: from the *Generic PHY* bindings
> > +- phys: from the *Generic PHY* bindings
> > +- clocks: clock provider specifier
> > +- clock-names: shall be "usb2-clock"
> > +Refer to clk/clock-bindings.txt for generic clock consumer properties
> > +
> > +Recommended properties:
> > +- dr_mode: One of "host" or "peripheral".
> 
> Do you support dual-role?
> 

Yes. We do support  both host/peripheral mode. 


Best Regards,
Rajesh Bhagat 

> > +- phy_type: the type of the phy connected to the core. Should be one
> > +  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
> > +  property the PORTSC register won't be touched
> > +
> > +Examples:
> > +usb at 8600000 {
> > +	compatible =  "fsl,ci-qoriq-usb2",
> > +		      "fsl,ci-qoriq-usb2-v2.5";
> > +	reg = <0x0 0x8600000 0x0 0x1000>;
> > +	interrupts = <0 139 0x4>;
> > +	phy-names = "usb2-phy";
> > +	phys = <&usbphy0>;
> > +	clock-names = "usb2-clock";
> > +	clocks = <&clockgen 4 3>;
> > +	dr_mode = "host";
> > +	phy_type = "ulpi";
> > +};
> > --
> > 2.6.2.198.g614a2ac
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-usb"
> > in the body of a message to majordomo at vger.kernel.org More majordomo
> > info at  http://vger.kernel.org/majordomo-info.html
> 
> --
> 
> Best Regards,
> Peter Chen