From: hzpeterchen@gmail.com (Peter Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 18/22] usb: chipidea: msm: Add reset controller for PHY POR bit
Date: Mon, 11 Jul 2016 13:32:28 +0800 [thread overview]
Message-ID: <20160711053228.GB31647@shlinux2> (raw)
In-Reply-To: <20160707222114.1673-19-stephen.boyd@linaro.org>
On Thu, Jul 07, 2016 at 03:21:09PM -0700, Stephen Boyd wrote:
> The MSM chipidea wrapper has two bits that are used to reset the
> first or second phy. Add support for these bits via the reset
> controller framework, so that phy drivers can reset their
> hardware at the right time during initialization.
>
> Cc: Peter Chen <peter.chen@nxp.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
> ---
> drivers/usb/chipidea/Kconfig | 1 +
> drivers/usb/chipidea/ci_hdrc_msm.c | 45 ++++++++++++++++++++++++++++++++++++--
> 2 files changed, 44 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
> index 4f8c342a8865..488ecdf56bdd 100644
> --- a/drivers/usb/chipidea/Kconfig
> +++ b/drivers/usb/chipidea/Kconfig
> @@ -2,6 +2,7 @@ config USB_CHIPIDEA
> tristate "ChipIdea Highspeed Dual Role Controller"
> depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA
> select EXTCON
> + select RESET_CONTROLLER
> help
> Say Y here if your system has a dual role high speed USB
> controller based on ChipIdea silicon IP. Currently, only the
> diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
> index da2d399acdd2..ab6a7713ee5c 100644
> --- a/drivers/usb/chipidea/ci_hdrc_msm.c
> +++ b/drivers/usb/chipidea/ci_hdrc_msm.c
> @@ -14,6 +14,7 @@
> #include <linux/mfd/syscon.h>
> #include <linux/regmap.h>
> #include <linux/io.h>
> +#include <linux/reset-controller.h>
> #include <linux/extcon.h>
> #include <linux/of.h>
>
> @@ -31,8 +32,10 @@
> #define HSPHY_SESS_VLD_CTRL BIT(25)
>
> /* Vendor base starts at 0x200 beyond CI base */
> +#define HS_PHY_CTRL 0x0040
> #define HS_PHY_SEC_CTRL 0x0078
> #define HS_PHY_DIG_CLAMP_N BIT(16)
> +#define HS_PHY_POR_ASSERT BIT(0)
>
> struct ci_hdrc_msm {
> struct platform_device *ci;
> @@ -40,11 +43,38 @@ struct ci_hdrc_msm {
> struct clk *iface_clk;
> struct clk *fs_clk;
> struct ci_hdrc_platform_data pdata;
> + struct reset_controller_dev rcdev;
> bool secondary_phy;
> bool hsic;
> void __iomem *base;
> };
>
> +static int
> +ci_hdrc_msm_por_reset(struct reset_controller_dev *r, unsigned long id)
> +{
> + struct ci_hdrc_msm *ci_msm = container_of(r, struct ci_hdrc_msm, rcdev);
> + void __iomem *addr = ci_msm->base;
> + u32 val;
> +
> + if (id)
> + addr += HS_PHY_SEC_CTRL;
> + else
> + addr += HS_PHY_CTRL;
> +
> + val = readl_relaxed(addr);
> + val |= HS_PHY_POR_ASSERT;
> + writel(val, addr);
> + udelay(12);
Does this delay is reference manual defines or experienced value?
Do you need to comment it?
Peter
> + val &= ~HS_PHY_POR_ASSERT;
> + writel(val, addr);
> +
> + return 0;
> +}
> +
> +static const struct reset_control_ops ci_hdrc_msm_reset_ops = {
> + .reset = ci_hdrc_msm_por_reset,
> +};
> +
> static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
> {
> struct device *dev = ci->dev->parent;
> @@ -186,10 +216,18 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
> if (!ci->base)
> return -ENOMEM;
>
> - ret = clk_prepare_enable(ci->fs_clk);
> + ci->rcdev.owner = THIS_MODULE;
> + ci->rcdev.ops = &ci_hdrc_msm_reset_ops;
> + ci->rcdev.of_node = pdev->dev.of_node;
> + ci->rcdev.nr_resets = 2;
> + ret = reset_controller_register(&ci->rcdev);
> if (ret)
> return ret;
>
> + ret = clk_prepare_enable(ci->fs_clk);
> + if (ret)
> + goto err_fs;
> +
> reset_control_assert(reset);
> usleep_range(10000, 12000);
> reset_control_deassert(reset);
> @@ -198,7 +236,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
>
> ret = clk_prepare_enable(ci->core_clk);
> if (ret)
> - return ret;
> + goto err_fs;
>
> ret = clk_prepare_enable(ci->iface_clk);
> if (ret)
> @@ -236,6 +274,8 @@ err_mux:
> clk_disable_unprepare(ci->iface_clk);
> err_iface:
> clk_disable_unprepare(ci->core_clk);
> +err_fs:
> + reset_controller_unregister(&ci->rcdev);
> return ret;
> }
>
> @@ -247,6 +287,7 @@ static int ci_hdrc_msm_remove(struct platform_device *pdev)
> ci_hdrc_remove_device(ci->ci);
> clk_disable_unprepare(ci->iface_clk);
> clk_disable_unprepare(ci->core_clk);
> + reset_controller_unregister(&ci->rcdev);
>
> return 0;
> }
> --
> 2.9.0.rc2.8.ga28705d
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards,
Peter Chen
next prev parent reply other threads:[~2016-07-11 5:32 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-07 22:20 [PATCH v2 00/22] Support qcom's HSIC USB and rewrite USB2 HS phy support Stephen Boyd
2016-07-07 22:20 ` [PATCH v2 01/22] of: device: Support loading a module with OF based modalias Stephen Boyd
2016-07-07 22:20 ` [PATCH v2 02/22] of: device: Export of_device_{get_modalias, uvent_modalias} to modules Stephen Boyd
2016-07-07 22:20 ` [PATCH v2 03/22] usb: ulpi: Support device discovery via device properties Stephen Boyd
2016-07-08 9:04 ` Peter Chen
2016-08-05 21:27 ` Stephen Boyd
2016-08-23 19:58 ` Stephen Boyd
2016-08-24 7:31 ` Heikki Krogerus
2016-08-26 18:54 ` Stephen Boyd
2016-07-18 2:23 ` Rob Herring
2016-08-05 21:40 ` Stephen Boyd
2016-08-23 20:00 ` Stephen Boyd
2016-08-23 23:06 ` Rob Herring
2016-08-24 1:06 ` Stephen Boyd
2016-07-07 22:20 ` [PATCH v2 04/22] usb: chipidea: Only read/write OTGSC from one place Stephen Boyd
2016-07-08 9:14 ` Peter Chen
2016-08-05 21:41 ` Stephen Boyd
2016-08-06 7:42 ` Peter Chen
2016-07-07 22:20 ` [PATCH v2 05/22] usb: chipidea: Handle extcon events properly Stephen Boyd
2016-07-07 22:20 ` [PATCH v2 06/22] usb: chipidea: Add platform flag for wrapper phy management Stephen Boyd
2016-07-08 9:25 ` Peter Chen
2016-08-05 21:46 ` Stephen Boyd
2016-08-06 7:59 ` Peter Chen
2016-08-08 23:46 ` Stephen Boyd
2016-08-09 0:36 ` Peter Chen
2016-07-07 22:20 ` [PATCH v2 07/22] usb: chipidea: Notify events when switching host mode Stephen Boyd
2016-07-08 9:29 ` Peter Chen
2016-07-07 22:20 ` [PATCH v2 08/22] usb: chipidea: Remove locking in ci_udc_start() Stephen Boyd
2016-07-08 9:45 ` Peter Chen
2016-08-05 21:53 ` Stephen Boyd
2016-08-06 7:54 ` Peter Chen
2016-08-08 23:47 ` Stephen Boyd
2016-08-09 0:42 ` Peter Chen
2016-07-07 22:21 ` [PATCH v2 09/22] usb: chipidea: Kick OTG state machine for AVVIS with vbus extcon Stephen Boyd
2016-07-11 2:25 ` Peter Chen
2016-07-07 22:21 ` [PATCH v2 10/22] usb: chipidea: Add support for ULPI PHY bus Stephen Boyd
2016-07-11 3:10 ` Peter Chen
2016-07-11 22:02 ` Stephen Boyd
2016-07-07 22:21 ` [PATCH v2 11/22] usb: chipidea: msm: Mark device as runtime pm active Stephen Boyd
2016-07-11 3:19 ` Peter Chen
2016-07-07 22:21 ` [PATCH v2 12/22] usb: chipidea: msm: Rely on core to override AHBBURST Stephen Boyd
2016-07-11 3:24 ` Peter Chen
2016-07-07 22:21 ` [PATCH v2 13/22] usb: chipidea: msm: Use hw_write_id_reg() instead of writel Stephen Boyd
2016-07-07 22:21 ` [PATCH v2 14/22] usb: chipidea: msm: Add proper clk and reset support Stephen Boyd
2016-07-11 4:32 ` Peter Chen
2016-07-07 22:21 ` [PATCH v2 15/22] usb: chipidea: msm: Mux over secondary phy at the right time Stephen Boyd
2016-07-11 4:43 ` Peter Chen
2016-07-11 22:03 ` Stephen Boyd
2016-07-12 1:07 ` Peter Chen
2016-07-07 22:21 ` [PATCH v2 16/22] usb: chipidea: msm: Restore wrapper settings after reset Stephen Boyd
2016-07-11 5:24 ` Peter Chen
2016-07-07 22:21 ` [PATCH v2 17/22] usb: chipidea: msm: Make platform data driver local instead of global Stephen Boyd
2016-07-11 5:26 ` Peter Chen
2016-07-07 22:21 ` [PATCH v2 18/22] usb: chipidea: msm: Add reset controller for PHY POR bit Stephen Boyd
2016-07-11 5:32 ` Peter Chen [this message]
2016-07-11 22:07 ` Stephen Boyd
2016-07-12 1:09 ` Peter Chen
2016-07-07 22:21 ` [PATCH v2 19/22] usb: chipidea: msm: Handle phy power states Stephen Boyd
2016-07-11 5:38 ` Peter Chen
2016-07-07 22:21 ` [PATCH v2 20/22] usb: chipidea: msm: Be silent on probe defer errors Stephen Boyd
2016-07-11 5:39 ` Peter Chen
2016-07-07 22:21 ` [PATCH v2 21/22] phy: Add support for Qualcomm's USB HSIC phy Stephen Boyd
2016-07-18 2:27 ` Rob Herring
2016-07-07 22:21 ` [PATCH v2 22/22] phy: Add support for Qualcomm's USB HS phy Stephen Boyd
2016-07-18 2:28 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160711053228.GB31647@shlinux2 \
--to=hzpeterchen@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).