linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] spi: rockchip: limit transfers to (64K - 1) bytes
@ 2016-07-15  1:30 Brian Norris
  2016-07-15  1:56 ` Shawn Lin
  2016-07-20 16:44 ` Applied "spi: rockchip: limit transfers to (64K - 1) bytes" to the spi tree Mark Brown
  0 siblings, 2 replies; 7+ messages in thread
From: Brian Norris @ 2016-07-15  1:30 UTC (permalink / raw)
  To: linux-arm-kernel

The Rockchip SPI controller's length register only supports 16-bits,
yielding a maximum length of 64KiB (the CTRLR1 register holds "length -
1"). Trying to transfer more than that (e.g., with a large SPI flash
read) will cause the driver to hang.

Now, it seems that while theoretically we should be able to program
CTRLR1 with 0xffff, and get a 64KiB transfer, but that also seems to
cause the core to choke, so stick with a maximum of 64K - 1 bytes --
i.e., 0xffff.

Signed-off-by: Brian Norris <briannorris@chromium.org>
---
 drivers/spi/spi-rockchip.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index d840324bcc9f..0f89c2169c24 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -142,6 +142,12 @@
 /* sclk_out: spi master internal logic in rk3x can support 50Mhz */
 #define MAX_SCLK_OUT		50000000
 
+/*
+ * SPI_CTRLR1 is 16-bits, so we should support lengths of 0xffff + 1. However,
+ * the controller seems to hang when given 0x10000, so stick with this for now.
+ */
+#define ROCKCHIP_SPI_MAX_TRANLEN		0xffff
+
 enum rockchip_ssi_type {
 	SSI_MOTO_SPI = 0,
 	SSI_TI_SSP,
@@ -573,6 +579,11 @@ static void rockchip_spi_config(struct rockchip_spi *rs)
 	dev_dbg(rs->dev, "cr0 0x%x, div %d\n", cr0, div);
 }
 
+static size_t rockchip_spi_max_transfer_size(struct spi_device *spi)
+{
+	return ROCKCHIP_SPI_MAX_TRANLEN;
+}
+
 static int rockchip_spi_transfer_one(
 		struct spi_master *master,
 		struct spi_device *spi,
@@ -589,6 +600,11 @@ static int rockchip_spi_transfer_one(
 		return -EINVAL;
 	}
 
+	if (xfer->len > ROCKCHIP_SPI_MAX_TRANLEN) {
+		dev_err(rs->dev, "Transfer is too long (%d)\n", xfer->len);
+		return -EINVAL;
+	}
+
 	rs->speed = xfer->speed_hz;
 	rs->bpw = xfer->bits_per_word;
 	rs->n_bytes = rs->bpw >> 3;
@@ -730,6 +746,7 @@ static int rockchip_spi_probe(struct platform_device *pdev)
 	master->prepare_message = rockchip_spi_prepare_message;
 	master->unprepare_message = rockchip_spi_unprepare_message;
 	master->transfer_one = rockchip_spi_transfer_one;
+	master->max_transfer_size = rockchip_spi_max_transfer_size;
 	master->handle_err = rockchip_spi_handle_err;
 
 	rs->dma_tx.ch = dma_request_chan(rs->dev, "tx");
-- 
2.8.0.rc3.226.g39d4020

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH] spi: rockchip: limit transfers to (64K - 1) bytes
  2016-07-15  1:30 [PATCH] spi: rockchip: limit transfers to (64K - 1) bytes Brian Norris
@ 2016-07-15  1:56 ` Shawn Lin
  2016-07-15  2:31   ` Brian Norris
  2016-07-20 16:44 ` Applied "spi: rockchip: limit transfers to (64K - 1) bytes" to the spi tree Mark Brown
  1 sibling, 1 reply; 7+ messages in thread
From: Shawn Lin @ 2016-07-15  1:56 UTC (permalink / raw)
  To: linux-arm-kernel

+ huibing

? 2016/7/15 9:30, Brian Norris ??:
> The Rockchip SPI controller's length register only supports 16-bits,
> yielding a maximum length of 64KiB (the CTRLR1 register holds "length -
> 1"). Trying to transfer more than that (e.g., with a large SPI flash
> read) will cause the driver to hang.

Brian, are you using dma or pio?

 From huibing's feedback for rk3399, you can see...

root at rk3399:/ # echo read 0 1 0x10001 > /sys/slt/SPI.0/SPI.0 

[148360.004332] f0041200:       DMAMOV CCR 0x804200
[148360.004772] f0041206:       DMAMOV SAR 0xff1d0800
[148360.005161] f004120c:       DMAMOV DAR 0xc9f60000
[148360.005549] f0041212:       DMALP_0 255
[148360.005866] f0041214:       DMALP_1 255
[148360.006178] f0041216:       DMAWFPB 13
[148360.006483] f0041218:       DMALDPB 13
[148360.006788] f004121a:       DMASTA
[148360.007061] f004121b:       DMAFLUSHP 13
[148360.007380] f004121d:       DMALPENDA_1 bjmpto_7
[148360.007763] f004121f:       DMALPENDA_0 bjmpto_b
[148360.008144] f0041221:       DMAWFPB 13
[148360.008448] f0041223:       DMALDPB 13
[148360.008752] f0041225:       DMASTA
[148360.009026] f0041226:       DMAFLUSHP 13
[148360.009344] f0041228:       DMASEV 1
[148360.009633] f004122a:       DMAEND
[148360.147993] slt_spi_test spi32766.0: SPI transfer timed out
[148360.148653] spi read 65537*1 cost 144493us speed:453KB/S
root at rk3399:/ #
root at rk3399:/ # echo read 0 1 0x10000 > /sys/slt/SPI.0/SPI.0 

[148365.172429] f0041200:       DMAMOV CCR 0x804200
[148365.172863] f0041206:       DMAMOV SAR 0xff1d0800
[148365.173252] f004120c:       DMAMOV DAR 0xc9f90000
[148365.173641] f0041212:       DMALP_0 255
[148365.173958] f0041214:       DMALP_1 255
[148365.174270] f0041216:       DMAWFPB 13
[148365.174574] f0041218:       DMALDPB 13
[148365.174878] f004121a:       DMASTA
[148365.175152] f004121b:       DMAFLUSHP 13
[148365.175471] f004121d:       DMALPENDA_1 bjmpto_7
[148365.175852] f004121f:       DMALPENDA_0 bjmpto_b
[148365.176234] f0041221:       DMASEV 1
[148365.176522] f0041223:       DMAEND
[148365.207421] spi read 65536*1 cost 35144us speed:1864KB/S



>
> Now, it seems that while theoretically we should be able to program
> CTRLR1 with 0xffff, and get a 64KiB transfer, but that also seems to
> cause the core to choke, so stick with a maximum of 64K - 1 bytes --
> i.e., 0xffff.
>
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> ---
>  drivers/spi/spi-rockchip.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>
> diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
> index d840324bcc9f..0f89c2169c24 100644
> --- a/drivers/spi/spi-rockchip.c
> +++ b/drivers/spi/spi-rockchip.c
> @@ -142,6 +142,12 @@
>  /* sclk_out: spi master internal logic in rk3x can support 50Mhz */
>  #define MAX_SCLK_OUT		50000000
>
> +/*
> + * SPI_CTRLR1 is 16-bits, so we should support lengths of 0xffff + 1. However,
> + * the controller seems to hang when given 0x10000, so stick with this for now.
> + */
> +#define ROCKCHIP_SPI_MAX_TRANLEN		0xffff
> +
>  enum rockchip_ssi_type {
>  	SSI_MOTO_SPI = 0,
>  	SSI_TI_SSP,
> @@ -573,6 +579,11 @@ static void rockchip_spi_config(struct rockchip_spi *rs)
>  	dev_dbg(rs->dev, "cr0 0x%x, div %d\n", cr0, div);
>  }
>
> +static size_t rockchip_spi_max_transfer_size(struct spi_device *spi)
> +{
> +	return ROCKCHIP_SPI_MAX_TRANLEN;
> +}
> +
>  static int rockchip_spi_transfer_one(
>  		struct spi_master *master,
>  		struct spi_device *spi,
> @@ -589,6 +600,11 @@ static int rockchip_spi_transfer_one(
>  		return -EINVAL;
>  	}
>
> +	if (xfer->len > ROCKCHIP_SPI_MAX_TRANLEN) {
> +		dev_err(rs->dev, "Transfer is too long (%d)\n", xfer->len);
> +		return -EINVAL;
> +	}
> +
>  	rs->speed = xfer->speed_hz;
>  	rs->bpw = xfer->bits_per_word;
>  	rs->n_bytes = rs->bpw >> 3;
> @@ -730,6 +746,7 @@ static int rockchip_spi_probe(struct platform_device *pdev)
>  	master->prepare_message = rockchip_spi_prepare_message;
>  	master->unprepare_message = rockchip_spi_unprepare_message;
>  	master->transfer_one = rockchip_spi_transfer_one;
> +	master->max_transfer_size = rockchip_spi_max_transfer_size;
>  	master->handle_err = rockchip_spi_handle_err;
>
>  	rs->dma_tx.ch = dma_request_chan(rs->dev, "tx");
>


-- 
Best Regards
Shawn Lin

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH] spi: rockchip: limit transfers to (64K - 1) bytes
  2016-07-15  1:56 ` Shawn Lin
@ 2016-07-15  2:31   ` Brian Norris
  2016-07-15  2:42     ` Shawn Lin
  0 siblings, 1 reply; 7+ messages in thread
From: Brian Norris @ 2016-07-15  2:31 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Shawn,

On Fri, Jul 15, 2016 at 09:56:59AM +0800, Shawn Lin wrote:
> ? 2016/7/15 9:30, Brian Norris ??:
> >The Rockchip SPI controller's length register only supports 16-bits,
> >yielding a maximum length of 64KiB (the CTRLR1 register holds "length -
> >1"). Trying to transfer more than that (e.g., with a large SPI flash
> >read) will cause the driver to hang.
> 
> Brian, are you using dma or pio?

I forgot to mention, I'm using PIO. (The rk3399.dts in linux-next
doesn't even have the 'dma{s,-names}' properties listed for spi[0-5].)

> From huibing's feedback for rk3399, you can see...
> 
> root at rk3399:/ # echo read 0 1 0x10001 > /sys/slt/SPI.0/SPI.0

I don't know what that file is, but presumably it's some kind of bare
SPI test interface you have in your private tree?

> [148360.004332] f0041200:       DMAMOV CCR 0x804200
> [148360.004772] f0041206:       DMAMOV SAR 0xff1d0800
> [148360.005161] f004120c:       DMAMOV DAR 0xc9f60000
> [148360.005549] f0041212:       DMALP_0 255
> [148360.005866] f0041214:       DMALP_1 255
> [148360.006178] f0041216:       DMAWFPB 13
> [148360.006483] f0041218:       DMALDPB 13
> [148360.006788] f004121a:       DMASTA
> [148360.007061] f004121b:       DMAFLUSHP 13
> [148360.007380] f004121d:       DMALPENDA_1 bjmpto_7
> [148360.007763] f004121f:       DMALPENDA_0 bjmpto_b
> [148360.008144] f0041221:       DMAWFPB 13
> [148360.008448] f0041223:       DMALDPB 13
> [148360.008752] f0041225:       DMASTA
> [148360.009026] f0041226:       DMAFLUSHP 13
> [148360.009344] f0041228:       DMASEV 1
> [148360.009633] f004122a:       DMAEND
> [148360.147993] slt_spi_test spi32766.0: SPI transfer timed out
> [148360.148653] spi read 65537*1 cost 144493us speed:453KB/S

And this means a 64KiB + 1 transfer using DMA timed out?

> root at rk3399:/ #
> root at rk3399:/ # echo read 0 1 0x10000 > /sys/slt/SPI.0/SPI.0
> 
> [148365.172429] f0041200:       DMAMOV CCR 0x804200
> [148365.172863] f0041206:       DMAMOV SAR 0xff1d0800
> [148365.173252] f004120c:       DMAMOV DAR 0xc9f90000
> [148365.173641] f0041212:       DMALP_0 255
> [148365.173958] f0041214:       DMALP_1 255
> [148365.174270] f0041216:       DMAWFPB 13
> [148365.174574] f0041218:       DMALDPB 13
> [148365.174878] f004121a:       DMASTA
> [148365.175152] f004121b:       DMAFLUSHP 13
> [148365.175471] f004121d:       DMALPENDA_1 bjmpto_7
> [148365.175852] f004121f:       DMALPENDA_0 bjmpto_b
> [148365.176234] f0041221:       DMASEV 1
> [148365.176522] f0041223:       DMAEND
> [148365.207421] spi read 65536*1 cost 35144us speed:1864KB/S

And a 64KiB transfer using DMA completed successfully?

So maybe there's a driver bug in the PIO path that gives us an
off-by-one error. I poked around a bit and couldn't figure out anything,
so I sent this. Technically, this patch is still valid (even if not
optimal) for the DMA case too...

If you can't figure out what the difference is, and you really don't
want to unnecessarily limit the DMA case, then a last resort hack could
be to say:

static size_t rockchip_spi_max_transfer_size(struct spi_device *device)
{
	if (using dma) // this is obviously pseudocode
		return SZ_64K;
	else
		return SZ_64K - 1;
}

or something like that.

Brian

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH] spi: rockchip: limit transfers to (64K - 1) bytes
  2016-07-15  2:31   ` Brian Norris
@ 2016-07-15  2:42     ` Shawn Lin
  2016-07-15  3:09       ` Brian Norris
  0 siblings, 1 reply; 7+ messages in thread
From: Shawn Lin @ 2016-07-15  2:42 UTC (permalink / raw)
  To: linux-arm-kernel

? 2016/7/15 10:31, Brian Norris ??:
> Hi Shawn,
>
> On Fri, Jul 15, 2016 at 09:56:59AM +0800, Shawn Lin wrote:
>> ? 2016/7/15 9:30, Brian Norris ??:
>>> The Rockchip SPI controller's length register only supports 16-bits,
>>> yielding a maximum length of 64KiB (the CTRLR1 register holds "length -
>>> 1"). Trying to transfer more than that (e.g., with a large SPI flash
>>> read) will cause the driver to hang.
>>
>> Brian, are you using dma or pio?
>
> I forgot to mention, I'm using PIO. (The rk3399.dts in linux-next
> doesn't even have the 'dma{s,-names}' properties listed for spi[0-5].)

okay.

>
>> From huibing's feedback for rk3399, you can see...
>>
>> root at rk3399:/ # echo read 0 1 0x10001 > /sys/slt/SPI.0/SPI.0
>
> I don't know what that file is, but presumably it's some kind of bare
> SPI test interface you have in your private tree?

yes.

>
>> [148360.004332] f0041200:       DMAMOV CCR 0x804200
>> [148360.004772] f0041206:       DMAMOV SAR 0xff1d0800
>> [148360.005161] f004120c:       DMAMOV DAR 0xc9f60000
>> [148360.005549] f0041212:       DMALP_0 255
>> [148360.005866] f0041214:       DMALP_1 255
>> [148360.006178] f0041216:       DMAWFPB 13
>> [148360.006483] f0041218:       DMALDPB 13
>> [148360.006788] f004121a:       DMASTA
>> [148360.007061] f004121b:       DMAFLUSHP 13
>> [148360.007380] f004121d:       DMALPENDA_1 bjmpto_7
>> [148360.007763] f004121f:       DMALPENDA_0 bjmpto_b
>> [148360.008144] f0041221:       DMAWFPB 13
>> [148360.008448] f0041223:       DMALDPB 13
>> [148360.008752] f0041225:       DMASTA
>> [148360.009026] f0041226:       DMAFLUSHP 13
>> [148360.009344] f0041228:       DMASEV 1
>> [148360.009633] f004122a:       DMAEND
>> [148360.147993] slt_spi_test spi32766.0: SPI transfer timed out
>> [148360.148653] spi read 65537*1 cost 144493us speed:453KB/S
>
> And this means a 64KiB + 1 transfer using DMA timed out?

Right.

>
>> root at rk3399:/ #
>> root at rk3399:/ # echo read 0 1 0x10000 > /sys/slt/SPI.0/SPI.0
>>
>> [148365.172429] f0041200:       DMAMOV CCR 0x804200
>> [148365.172863] f0041206:       DMAMOV SAR 0xff1d0800
>> [148365.173252] f004120c:       DMAMOV DAR 0xc9f90000
>> [148365.173641] f0041212:       DMALP_0 255
>> [148365.173958] f0041214:       DMALP_1 255
>> [148365.174270] f0041216:       DMAWFPB 13
>> [148365.174574] f0041218:       DMALDPB 13
>> [148365.174878] f004121a:       DMASTA
>> [148365.175152] f004121b:       DMAFLUSHP 13
>> [148365.175471] f004121d:       DMALPENDA_1 bjmpto_7
>> [148365.175852] f004121f:       DMALPENDA_0 bjmpto_b
>> [148365.176234] f0041221:       DMASEV 1
>> [148365.176522] f0041223:       DMAEND
>> [148365.207421] spi read 65536*1 cost 35144us speed:1864KB/S
>
> And a 64KiB transfer using DMA completed successfully?

yup.

>
> So maybe there's a driver bug in the PIO path that gives us an
> off-by-one error. I poked around a bit and couldn't figure out anything,
> so I sent this. Technically, this patch is still valid (even if not
> optimal) for the DMA case too...

Huibing is using pio to test this case, and we still achieve it
successfully? That means there may be some minor diff for the pio
path between your chromium repo and my local branch.

>
> If you can't figure out what the difference is, and you really don't
> want to unnecessarily limit the DMA case, then a last resort hack could
> be to say:
>

Could you get spi-rockchip.c of rockchip local kernel 4.4 from Caesar
to see if you could transfer 64KB with the one we're using?


> static size_t rockchip_spi_max_transfer_size(struct spi_device *device)
> {
> 	if (using dma) // this is obviously pseudocode
> 		return SZ_64K;
> 	else
> 		return SZ_64K - 1;
> }
>
> or something like that.
>
> Brian
>
>
>


-- 
Best Regards
Shawn Lin

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH] spi: rockchip: limit transfers to (64K - 1) bytes
  2016-07-15  2:42     ` Shawn Lin
@ 2016-07-15  3:09       ` Brian Norris
  0 siblings, 0 replies; 7+ messages in thread
From: Brian Norris @ 2016-07-15  3:09 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Jul 15, 2016 at 10:42:55AM +0800, Shawn Lin wrote:
> ? 2016/7/15 10:31, Brian Norris ??:
> >So maybe there's a driver bug in the PIO path that gives us an
> >off-by-one error. I poked around a bit and couldn't figure out anything,
> >so I sent this. Technically, this patch is still valid (even if not
> >optimal) for the DMA case too...
> 
> Huibing is using pio to test this case, and we still achieve it
> successfully?

Are you saying Huibing has tested PIO with 64KB transfers, or is that a
question? If the former, it'd be great if he can publish the differences
between his kernel and upstream to produce this.

> That means there may be some minor diff for the pio
> path between your chromium repo and my local branch.

This is an upstream kernel mailing list. I'd expect we can agree to test
on an upstream kernel...

> >want to unnecessarily limit the DMA case, then a last resort hack could
> >be to say:
> >
> 
> Could you get spi-rockchip.c of rockchip local kernel 4.4 from Caesar
> to see if you could transfer 64KB with the one we're using?

I just compared with some (possibly old) copy of your vendor-kernel
driver, and there are a few moderate differences. I didn't test it yet.
I'd think the onus is on you to publish your changes though, if you
think you've fixed things in your own private tree...but I'm willing to
test any changes you recommend.

Brian

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Applied "spi: rockchip: limit transfers to (64K - 1) bytes" to the spi tree
  2016-07-15  1:30 [PATCH] spi: rockchip: limit transfers to (64K - 1) bytes Brian Norris
  2016-07-15  1:56 ` Shawn Lin
@ 2016-07-20 16:44 ` Mark Brown
  2016-07-20 17:01   ` Brian Norris
  1 sibling, 1 reply; 7+ messages in thread
From: Mark Brown @ 2016-07-20 16:44 UTC (permalink / raw)
  To: linux-arm-kernel

The patch

   spi: rockchip: limit transfers to (64K - 1) bytes

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 5185a81c02d4118b11e6cb7b5fbf6f15ff7aff90 Mon Sep 17 00:00:00 2001
From: Brian Norris <briannorris@chromium.org>
Date: Thu, 14 Jul 2016 18:30:59 -0700
Subject: [PATCH] spi: rockchip: limit transfers to (64K - 1) bytes

The Rockchip SPI controller's length register only supports 16-bits,
yielding a maximum length of 64KiB (the CTRLR1 register holds "length -
1"). Trying to transfer more than that (e.g., with a large SPI flash
read) will cause the driver to hang.

Now, it seems that while theoretically we should be able to program
CTRLR1 with 0xffff, and get a 64KiB transfer, but that also seems to
cause the core to choke, so stick with a maximum of 64K - 1 bytes --
i.e., 0xffff.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-rockchip.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index cd89682065b9..cf69f4dfb8c7 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -142,6 +142,12 @@
 /* sclk_out: spi master internal logic in rk3x can support 50Mhz */
 #define MAX_SCLK_OUT		50000000
 
+/*
+ * SPI_CTRLR1 is 16-bits, so we should support lengths of 0xffff + 1. However,
+ * the controller seems to hang when given 0x10000, so stick with this for now.
+ */
+#define ROCKCHIP_SPI_MAX_TRANLEN		0xffff
+
 enum rockchip_ssi_type {
 	SSI_MOTO_SPI = 0,
 	SSI_TI_SSP,
@@ -573,6 +579,11 @@ static void rockchip_spi_config(struct rockchip_spi *rs)
 	dev_dbg(rs->dev, "cr0 0x%x, div %d\n", cr0, div);
 }
 
+static size_t rockchip_spi_max_transfer_size(struct spi_device *spi)
+{
+	return ROCKCHIP_SPI_MAX_TRANLEN;
+}
+
 static int rockchip_spi_transfer_one(
 		struct spi_master *master,
 		struct spi_device *spi,
@@ -589,6 +600,11 @@ static int rockchip_spi_transfer_one(
 		return -EINVAL;
 	}
 
+	if (xfer->len > ROCKCHIP_SPI_MAX_TRANLEN) {
+		dev_err(rs->dev, "Transfer is too long (%d)\n", xfer->len);
+		return -EINVAL;
+	}
+
 	rs->speed = xfer->speed_hz;
 	rs->bpw = xfer->bits_per_word;
 	rs->n_bytes = rs->bpw >> 3;
@@ -728,6 +744,7 @@ static int rockchip_spi_probe(struct platform_device *pdev)
 	master->prepare_message = rockchip_spi_prepare_message;
 	master->unprepare_message = rockchip_spi_unprepare_message;
 	master->transfer_one = rockchip_spi_transfer_one;
+	master->max_transfer_size = rockchip_spi_max_transfer_size;
 	master->handle_err = rockchip_spi_handle_err;
 
 	rs->dma_tx.ch = dma_request_chan(rs->dev, "tx");
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Applied "spi: rockchip: limit transfers to (64K - 1) bytes" to the spi tree
  2016-07-20 16:44 ` Applied "spi: rockchip: limit transfers to (64K - 1) bytes" to the spi tree Mark Brown
@ 2016-07-20 17:01   ` Brian Norris
  0 siblings, 0 replies; 7+ messages in thread
From: Brian Norris @ 2016-07-20 17:01 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Mark,

On Wed, Jul 20, 2016 at 05:44:04PM +0100, Mark Brown wrote:
> The patch
> 
>    spi: rockchip: limit transfers to (64K - 1) bytes
> 
> has been applied to the spi tree at
> 
>    git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 
> 
> All being well this means that it will be integrated into the linux-next
> tree (usually sometime in the next 24 hours) and sent to Linus during
> the next merge window (or sooner if it is a bug fix), however if
> problems are discovered then the patch may be dropped or reverted.  
> 
> You may get further e-mails resulting from automated or manual testing
> and review of the tree, please engage with people reporting problems and
> send followup patches addressing any issues that are reported if needed.
> 
> If any updates are required or you are submitting further changes they
> should be sent as incremental updates against current git, existing
> patches will not be replaced.
> 
> Please add any relevant lists and maintainers to the CCs when replying
> to this mail.
> 
> Thanks,
> Mark
> 
> From 5185a81c02d4118b11e6cb7b5fbf6f15ff7aff90 Mon Sep 17 00:00:00 2001
> From: Brian Norris <briannorris@chromium.org>
> Date: Thu, 14 Jul 2016 18:30:59 -0700
> Subject: [PATCH] spi: rockchip: limit transfers to (64K - 1) bytes
> 
> The Rockchip SPI controller's length register only supports 16-bits,
> yielding a maximum length of 64KiB (the CTRLR1 register holds "length -
> 1"). Trying to transfer more than that (e.g., with a large SPI flash
> read) will cause the driver to hang.
> 
> Now, it seems that while theoretically we should be able to program
> CTRLR1 with 0xffff, and get a 64KiB transfer, but that also seems to
> cause the core to choke, so stick with a maximum of 64K - 1 bytes --
> i.e., 0xffff.
> 
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> Signed-off-by: Mark Brown <broonie@kernel.org>

Thanks for applying! I'm OK with that, but just to be clear this might
qualify as a (very slight) hack, since I believe we should be able to
support a full 64KiB on both PIO and DMA. But it is better than the
current state of things on this driver, IMO. I suppose it's up to
Rockchip (or me) to figure out why some PIO transfers fail at exactly
64K if we want to support that. They have reproduced the failures I've
seen.

Brian

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2016-07-20 17:01 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-07-15  1:30 [PATCH] spi: rockchip: limit transfers to (64K - 1) bytes Brian Norris
2016-07-15  1:56 ` Shawn Lin
2016-07-15  2:31   ` Brian Norris
2016-07-15  2:42     ` Shawn Lin
2016-07-15  3:09       ` Brian Norris
2016-07-20 16:44 ` Applied "spi: rockchip: limit transfers to (64K - 1) bytes" to the spi tree Mark Brown
2016-07-20 17:01   ` Brian Norris

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).