* [PATCH 1/2] ARM: dts: imx7s-warp: Add MPL3115 sensor support
@ 2016-08-09 18:40 Breno Lima
2016-08-09 18:40 ` [PATCH 2/2] ARM: imx_v6_v7_defconfig: Add CONFIG_MPL3115 Breno Lima
2016-08-15 13:33 ` [PATCH 1/2] ARM: dts: imx7s-warp: Add MPL3115 sensor support Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Breno Lima @ 2016-08-09 18:40 UTC (permalink / raw)
To: linux-arm-kernel
Add support for MPL3115 NXP pressure sensor.
Tested by reading temperature and pressure:
$ cat /sys/bus/iio/devices/iio:device0/in_temp_raw
$ cat /sys/bus/iio/devices/iio:device0/in_pressure_raw
Signed-off-by: Breno Lima <breno.lima@nxp.com>
---
arch/arm/boot/dts/imx7s-warp.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index e318c98..ae23781 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -155,6 +155,18 @@
};
};
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ mpl3115 at 60 {
+ compatible = "fsl,mpl3115";
+ reg = <0x60>;
+ };
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -189,6 +201,13 @@
>;
};
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
+ MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] ARM: imx_v6_v7_defconfig: Add CONFIG_MPL3115
2016-08-09 18:40 [PATCH 1/2] ARM: dts: imx7s-warp: Add MPL3115 sensor support Breno Lima
@ 2016-08-09 18:40 ` Breno Lima
2016-08-15 13:33 ` [PATCH 1/2] ARM: dts: imx7s-warp: Add MPL3115 sensor support Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Breno Lima @ 2016-08-09 18:40 UTC (permalink / raw)
To: linux-arm-kernel
Add MPL3115 NXP pressure sensor configuration.
This sensor is used by warp7 board.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 0685d54..73c4c5e 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -340,6 +340,7 @@ CONFIG_STAGING=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_VF610_ADC=y
+CONFIG_MPL3115=y
CONFIG_PWM=y
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_IMX=y
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 1/2] ARM: dts: imx7s-warp: Add MPL3115 sensor support
2016-08-09 18:40 [PATCH 1/2] ARM: dts: imx7s-warp: Add MPL3115 sensor support Breno Lima
2016-08-09 18:40 ` [PATCH 2/2] ARM: imx_v6_v7_defconfig: Add CONFIG_MPL3115 Breno Lima
@ 2016-08-15 13:33 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2016-08-15 13:33 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Aug 09, 2016 at 03:40:45PM -0300, Breno Lima wrote:
> Add support for MPL3115 NXP pressure sensor.
>
> Tested by reading temperature and pressure:
>
> $ cat /sys/bus/iio/devices/iio:device0/in_temp_raw
> $ cat /sys/bus/iio/devices/iio:device0/in_pressure_raw
>
> Signed-off-by: Breno Lima <breno.lima@nxp.com>
Applied both, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-08-15 13:33 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-08-09 18:40 [PATCH 1/2] ARM: dts: imx7s-warp: Add MPL3115 sensor support Breno Lima
2016-08-09 18:40 ` [PATCH 2/2] ARM: imx_v6_v7_defconfig: Add CONFIG_MPL3115 Breno Lima
2016-08-15 13:33 ` [PATCH 1/2] ARM: dts: imx7s-warp: Add MPL3115 sensor support Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).