From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 30/41] ARM: dts: dra72-evm: Add pinmux configuration for MMC
Date: Fri, 19 May 2017 13:45:30 +0530 [thread overview]
Message-ID: <20170519081541.26753-31-kishon@ti.com> (raw)
In-Reply-To: <20170519081541.26753-1-kishon@ti.com>
Include dra72x-mmc-iodelay.dtsi which has pinmux and IODelay
configuration values for the various MMC modes for dra72 SoC
and use it in the pinctrl properties of MMC devicetree
nodes present in dra72-evm.dts.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/dra72-evm.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index b25e7c67badf..6a47d2abf1ee 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -6,6 +6,7 @@
* published by the Free Software Foundation.
*/
#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
/ {
model = "TI DRA722";
@@ -55,9 +56,22 @@
};
&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev10>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>;
vmmc_aux-supply = <&ldo1_reg>;
};
&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev10>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>;
vmmc-supply = <&evm_1v8_sw>;
};
--
2.11.0
next prev parent reply other threads:[~2017-05-19 8:15 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-19 8:15 [PATCH 00/41] omap_hsmmc: Add ADMA support and UHS/HS200/DDR support Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 01/41] mmc: host: omap_hsmmc: Support pbias and vmmc_aux to switch to 1.8v Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 02/41] mmc: host: omap_hsmmc: Separate setting voltage capabilities from bus power Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 03/41] mmc: host: omap_hsmmc: Program HCTL based on signal_voltage set by mmc core Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 04/41] mmc: host: omap_hsmmc: Add voltage switch support for UHS SD card Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 05/41] mmc: host: omap_hsmmc: Set clk rate to the max frequency Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 06/41] mmc: host: omap_hsmmc: Add tuning support Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 07/41] mmc: host: omap_hsmmc: Allow io voltage switch even for fixed vdd Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 08/41] mmc: host: omap_hsmmc: Remove incorrect voltage switch sequence Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 09/41] mmc: host: omap_hsmmc: Add software timer when timeout greater than hardware capablility Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 10/41] mmc: host: omap_hsmmc: Prepare *set_timing() to be used for iodelay setting Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 11/41] mmc: host: omap_hsmmc: Add new compatible string to support dra7 Kishon Vijay Abraham I
2017-05-23 14:44 ` Rob Herring
2017-05-19 8:15 ` [PATCH 12/41] mmc: host: omap_hsmmc: Fix error path sequence Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 13/41] mmc: host: omap_hsmmc: Add support to set IODELAY values Kishon Vijay Abraham I
2017-05-23 14:55 ` Rob Herring
2017-05-19 8:15 ` [PATCH 14/41] mmc: host: omap_hsmmc: Remove *use_dma* member Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 15/41] mmc: host: omap_hsmmc: Enable ADMA2 Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 16/41] mmc: omap_hsmmc: Support non-1.8V IO controllers Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 17/41] ARM: dts: dra72-evm: Add vmmc_aux supply to mmc1 Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 18/41] ARM: dts: dra72-evm-revc: " Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 19/41] ARM: dts: am57xx-beagle-x15-revb1: Fix supply name used for MMC1 IO lines Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 20/41] ARM: dts: dra7-evm: Correct the vmmc-supply for mmc2 Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 21/41] ARM: dts: dra72-evm-common: Correct " Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 22/41] ARM: dts: Add dra7 iodelay configuration Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 23/41] ARM: dts: dra72x: Create a common file with MMC/SD IOdelay data Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 24/41] ARM: dts: dra74x: " Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 25/41] ARM: dts: dra7-evm: Add pinmux configuration for MMC Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 26/41] ARM: dts: am57xx-beagle-x15: " Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 27/41] ARM: dts: am57xx-idk: Move common MMC/SD properties to common file Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 28/41] ARM: dts: am571x-idk: Add pinmux configuration for MMC Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 29/41] ARM: dts: am572x-idk: " Kishon Vijay Abraham I
2017-05-19 8:15 ` Kishon Vijay Abraham I [this message]
2017-05-19 8:15 ` [PATCH 31/41] ARM: dts: dra72-evm-revc: " Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 32/41] ARM: dts: dra71-evm: " Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 33/41] ARM: dts: dra7: Add "max-frequency" property to MMC dt nodes Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 34/41] ARM: dts: dra7: Use new dra7-specific compatible string Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 35/41] ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 36/41] ARM: dts: am57xx-idk: Set MMC2 IO voltage to 3.3V Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 37/41] ARM: dts: am57xx-beagle-x15-common: " Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 38/41] ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVM Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 39/41] ARM: omap2plus_defconfig: Enable PINCTRL_TI_IODELAY Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 40/41] ARM: multi_v7_defconfig: " Kishon Vijay Abraham I
2017-05-19 8:15 ` [PATCH 41/41] Documentation: ARM: Document new dependencies for MMC on DRA7 Kishon Vijay Abraham I
2017-05-19 22:13 ` [PATCH 00/41] omap_hsmmc: Add ADMA support and UHS/HS200/DDR support Tony Lindgren
2017-05-22 12:20 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170519081541.26753-31-kishon@ti.com \
--to=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).