linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/4] spi: imx: GPIO based chip selects should not be required
@ 2017-10-13 18:22 Trent Piepho
  2017-10-19 10:17 ` Oleksij Rempel
  0 siblings, 1 reply; 3+ messages in thread
From: Trent Piepho @ 2017-10-13 18:22 UTC (permalink / raw)
  To: linux-arm-kernel

The driver will fail to load if no gpio chip selects are specified,
this patch changes this so that it no longer fails.

It's possible to use all native chip selects, in which case there is
no reason to have a gpio chip select array.  This is what happens if
the *optional* device tree property "cs-gpios" is omitted.

The spi core already checks for the absence of gpio chip selects in
the master and assigns any slaves the gpio_cs value of -ENOENT.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
---
 drivers/spi/spi-imx.c | 29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index babb15f07995..07e6250f2dad 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1457,22 +1457,19 @@ static int spi_imx_probe(struct platform_device *pdev)
 		goto out_clk_put;
 	}
 
-	if (!master->cs_gpios) {
-		dev_err(&pdev->dev, "No CS GPIOs available\n");
-		ret = -EINVAL;
-		goto out_clk_put;
-	}
-
-	for (i = 0; i < master->num_chipselect; i++) {
-		if (!gpio_is_valid(master->cs_gpios[i]))
-			continue;
-
-		ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
-					DRIVER_NAME);
-		if (ret) {
-			dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
-				master->cs_gpios[i]);
-			goto out_clk_put;
+	/* Request GPIO CS lines, if any */
+	if (master->cs_gpios) {
+		for (i = 0; i < master->num_chipselect; i++) {
+			if (!gpio_is_valid(master->cs_gpios[i]))
+				continue;
+
+			ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
+						DRIVER_NAME);
+			if (ret) {
+				dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
+					master->cs_gpios[i]);
+				goto out_clk_put;
+			}
 		}
 	}
 
-- 
2.13.6

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH 1/4] spi: imx: GPIO based chip selects should not be required
  2017-10-13 18:22 [PATCH 1/4] spi: imx: GPIO based chip selects should not be required Trent Piepho
@ 2017-10-19 10:17 ` Oleksij Rempel
  0 siblings, 0 replies; 3+ messages in thread
From: Oleksij Rempel @ 2017-10-19 10:17 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Oct 13, 2017 at 06:22:01PM +0000, Trent Piepho wrote:
> The driver will fail to load if no gpio chip selects are specified,
> this patch changes this so that it no longer fails.
> 
> It's possible to use all native chip selects, in which case there is
> no reason to have a gpio chip select array.  This is what happens if
> the *optional* device tree property "cs-gpios" is omitted.
> 
> The spi core already checks for the absence of gpio chip selects in
> the master and assigns any slaves the gpio_cs value of -ENOENT.
> 
> Signed-off-by: Trent Piepho <tpiepho@impinj.com>
> ---
>  drivers/spi/spi-imx.c | 29 +++++++++++++----------------
>  1 file changed, 13 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index babb15f07995..07e6250f2dad 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -1457,22 +1457,19 @@ static int spi_imx_probe(struct platform_device *pdev)
>  		goto out_clk_put;
>  	}
>  
> -	if (!master->cs_gpios) {
> -		dev_err(&pdev->dev, "No CS GPIOs available\n");
> -		ret = -EINVAL;
> -		goto out_clk_put;
> -	}
> -
> -	for (i = 0; i < master->num_chipselect; i++) {
> -		if (!gpio_is_valid(master->cs_gpios[i]))
> -			continue;
> -
> -		ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
> -					DRIVER_NAME);
> -		if (ret) {
> -			dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
> -				master->cs_gpios[i]);
> -			goto out_clk_put;
> +	/* Request GPIO CS lines, if any */
> +	if (master->cs_gpios) {
> +		for (i = 0; i < master->num_chipselect; i++) {
> +			if (!gpio_is_valid(master->cs_gpios[i]))
> +				continue;
> +
> +			ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
> +						DRIVER_NAME);
> +			if (ret) {
> +				dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
> +					master->cs_gpios[i]);
> +				goto out_clk_put;
> +			}
>  		}
>  	}
>  
> -- 
> 2.13.6

Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH 1/4] spi: imx: GPIO based chip selects should not be required
@ 2017-10-13 19:54 Trent Piepho
  0 siblings, 0 replies; 3+ messages in thread
From: Trent Piepho @ 2017-10-13 19:54 UTC (permalink / raw)
  To: linux-arm-kernel

The driver will fail to load if no gpio chip selects are specified,
this patch changes this so that it no longer fails.

It's possible to use all native chip selects, in which case there is
no reason to have a gpio chip select array.  This is what happens if
the *optional* device tree property "cs-gpios" is omitted.

The spi core already checks for the absence of gpio chip selects in
the master and assigns any slaves the gpio_cs value of -ENOENT.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
---
 drivers/spi/spi-imx.c | 29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index babb15f07995..07e6250f2dad 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1457,22 +1457,19 @@ static int spi_imx_probe(struct platform_device *pdev)
 		goto out_clk_put;
 	}
 
-	if (!master->cs_gpios) {
-		dev_err(&pdev->dev, "No CS GPIOs available\n");
-		ret = -EINVAL;
-		goto out_clk_put;
-	}
-
-	for (i = 0; i < master->num_chipselect; i++) {
-		if (!gpio_is_valid(master->cs_gpios[i]))
-			continue;
-
-		ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
-					DRIVER_NAME);
-		if (ret) {
-			dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
-				master->cs_gpios[i]);
-			goto out_clk_put;
+	/* Request GPIO CS lines, if any */
+	if (master->cs_gpios) {
+		for (i = 0; i < master->num_chipselect; i++) {
+			if (!gpio_is_valid(master->cs_gpios[i]))
+				continue;
+
+			ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
+						DRIVER_NAME);
+			if (ret) {
+				dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
+					master->cs_gpios[i]);
+				goto out_clk_put;
+			}
 		}
 	}
 
-- 
2.13.6

^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2017-10-19 10:17 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-10-13 18:22 [PATCH 1/4] spi: imx: GPIO based chip selects should not be required Trent Piepho
2017-10-19 10:17 ` Oleksij Rempel
2017-10-13 19:54 Trent Piepho

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).