linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: chunyan.zhang@spreadtrum.com (Chunyan Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5 04/12] clk: sprd: add mux clock support
Date: Mon, 20 Nov 2017 14:01:29 +0800	[thread overview]
Message-ID: <20171120060137.27380-5-chunyan.zhang@spreadtrum.com> (raw)
In-Reply-To: <20171120060137.27380-1-chunyan.zhang@spreadtrum.com>

This patch adds clock multiplexor support for Spreadtrum platforms,
the mux clocks also can be found in sprd composite clocks, so
provides two helpers that can be reused later on.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/clk/sprd/Makefile |  1 +
 drivers/clk/sprd/mux.c    | 78 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/sprd/mux.h    | 76 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 155 insertions(+)
 create mode 100644 drivers/clk/sprd/mux.c
 create mode 100644 drivers/clk/sprd/mux.h

diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index 8cd5592..cee36b5 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_SPRD_COMMON_CLK)	+= clk-sprd.o
 
 clk-sprd-y	+= common.o
 clk-sprd-y	+= gate.o
+clk-sprd-y	+= mux.o
diff --git a/drivers/clk/sprd/mux.c b/drivers/clk/sprd/mux.c
new file mode 100644
index 0000000..05ef9f0
--- /dev/null
+++ b/drivers/clk/sprd/mux.c
@@ -0,0 +1,78 @@
+/*
+ * Spreadtrum multiplexer clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include "mux.h"
+
+u8 sprd_mux_helper_get_parent(const struct sprd_clk_common *common,
+			      const struct sprd_mux_ssel *mux)
+{
+	unsigned int reg;
+	u8 parent;
+	int num_parents;
+	int i;
+
+	sprd_regmap_read(common->regmap, common->reg, &reg);
+	parent = reg >> mux->shift;
+	parent &= (1 << mux->width) - 1;
+
+	if (!mux->table)
+		return parent;
+
+	num_parents = clk_hw_get_num_parents(&common->hw);
+
+	for (i = 0; i < num_parents - 1; i++)
+		if (parent >= mux->table[i] && parent < mux->table[i + 1])
+			return i;
+
+	return num_parents - 1;
+}
+EXPORT_SYMBOL_GPL(sprd_mux_helper_get_parent);
+
+static u8 sprd_mux_get_parent(struct clk_hw *hw)
+{
+	struct sprd_mux *cm = hw_to_sprd_mux(hw);
+
+	return sprd_mux_helper_get_parent(&cm->common, &cm->mux);
+}
+
+int sprd_mux_helper_set_parent(const struct sprd_clk_common *common,
+			       const struct sprd_mux_ssel *mux,
+			       u8 index)
+{
+	unsigned int reg;
+
+	if (mux->table)
+		index = mux->table[index];
+
+	sprd_regmap_read(common->regmap, common->reg, &reg);
+	reg &= ~GENMASK(mux->width + mux->shift - 1, mux->shift);
+	sprd_regmap_write(common->regmap, common->reg,
+			  reg | (index << mux->shift));
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sprd_mux_helper_set_parent);
+
+static int sprd_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct sprd_mux *cm = hw_to_sprd_mux(hw);
+
+	return sprd_mux_helper_set_parent(&cm->common, &cm->mux, index);
+}
+
+const struct clk_ops sprd_mux_ops = {
+	.get_parent = sprd_mux_get_parent,
+	.set_parent = sprd_mux_set_parent,
+	.determine_rate = __clk_mux_determine_rate,
+};
+EXPORT_SYMBOL_GPL(sprd_mux_ops);
diff --git a/drivers/clk/sprd/mux.h b/drivers/clk/sprd/mux.h
new file mode 100644
index 0000000..683d63a
--- /dev/null
+++ b/drivers/clk/sprd/mux.h
@@ -0,0 +1,76 @@
+/*
+ * Spreadtrum multiplexer clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SPRD_MUX_H_
+#define _SPRD_MUX_H_
+
+#include "common.h"
+
+/**
+ * struct sprd_mux_ssel - Mux clock's source select bits in its register
+ * @shift: Bit offset of the divider in its register
+ * @width: Width of the divider field in its register
+ * @table: For some mux clocks, not all sources are used on some special
+ *	   chips, this matches the value of mux clock's register and the
+ *	   sources which are used for this mux clock
+ */
+struct sprd_mux_ssel {
+	u8		shift;
+	u8		width;
+	const u8	*table;
+};
+
+struct sprd_mux {
+	struct sprd_mux_ssel mux;
+	struct sprd_clk_common	common;
+};
+
+#define _SPRD_MUX_CLK(_shift, _width, _table)		\
+	{						\
+		.shift	= _shift,			\
+		.width	= _width,			\
+		.table	= _table,			\
+	}
+
+#define SPRD_MUX_CLK_TABLE(_struct, _name, _parents, _table,		\
+				     _reg, _shift, _width,		\
+				     _flags)				\
+	struct sprd_mux _struct = {					\
+		.mux	= _SPRD_MUX_CLK(_shift, _width, _table),	\
+		.common	= {						\
+			.regmap		= NULL,				\
+			.reg		= _reg,				\
+			.hw.init = CLK_HW_INIT_PARENTS(_name,		\
+						       _parents,	\
+						       &sprd_mux_ops,	\
+						       _flags),		\
+		}							\
+	}
+
+#define SPRD_MUX_CLK(_struct, _name, _parents, _reg,		\
+		     _shift, _width, _flags)			\
+	SPRD_MUX_CLK_TABLE(_struct, _name, _parents, NULL,	\
+			   _reg, _shift, _width, _flags)
+
+static inline struct sprd_mux *hw_to_sprd_mux(const struct clk_hw *hw)
+{
+	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
+
+	return container_of(common, struct sprd_mux, common);
+}
+
+extern const struct clk_ops sprd_mux_ops;
+
+u8 sprd_mux_helper_get_parent(const struct sprd_clk_common *common,
+			      const struct sprd_mux_ssel *mux);
+int sprd_mux_helper_set_parent(const struct sprd_clk_common *common,
+			       const struct sprd_mux_ssel *mux,
+			       u8 index);
+
+#endif /* _SPRD_MUX_H_ */
-- 
2.7.4

  parent reply	other threads:[~2017-11-20  6:01 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-20  6:01 [PATCH V5 00/12] add clock driver for Spreadtrum platforms Chunyan Zhang
2017-11-20  6:01 ` [PATCH V5 01/12] drivers: move clock common macros out from vendor directories Chunyan Zhang
2017-11-20  6:01 ` [PATCH V5 02/12] clk: sprd: Add common infrastructure Chunyan Zhang
2017-11-20  6:01 ` [PATCH V5 03/12] clk: sprd: add gate clock support Chunyan Zhang
2017-11-20  6:01 ` Chunyan Zhang [this message]
2017-11-20  6:01 ` [PATCH V5 05/12] clk: sprd: add divider " Chunyan Zhang
2017-11-20  6:01 ` [PATCH V5 06/12] clk: sprd: add composite " Chunyan Zhang
2017-11-20  6:01 ` [PATCH V5 07/12] clk: sprd: add adjustable pll support Chunyan Zhang
2017-11-20  6:01 ` [PATCH V5 08/12] dt-bindings: Add Spreadtrum clock binding documentation Chunyan Zhang
2017-11-20  6:01 ` [PATCH V5 09/12] clk: sprd: Add dt-bindings include file for SC9860 Chunyan Zhang
2017-11-20  6:01 ` [PATCH V5 10/12] clk: sprd: add clocks support " Chunyan Zhang
2017-11-23  2:34   ` kbuild test robot
2017-11-20  6:01 ` [PATCH V5 11/12] arm64: dts: add syscon for whale2 platform Chunyan Zhang
2017-11-20  6:01 ` [PATCH V5 12/12] arm64: dts: add clocks for SC9860 Chunyan Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171120060137.27380-5-chunyan.zhang@spreadtrum.com \
    --to=chunyan.zhang@spreadtrum.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).