* [PATCH 0/3] crypto: inside-secure: improve clock management
@ 2018-03-13 16:48 Gregory CLEMENT
2018-03-13 16:48 ` [PATCH 1/3] crypto: inside-secure - fix " Gregory CLEMENT
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Gregory CLEMENT @ 2018-03-13 16:48 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
This short series fixes the way the clocks are used for the SafeXcel
EIP-197 controller embedded in the Marvell Armada 7K/8K SoCs. On these
SoCs a second one is needed in order to clock the registers. It was
not noticed until now because we relied on the bootloader and also
because the clock driver was wrong.
Thanks to this fix, it would be possible to fix the clock driver
without introducing a regression.
While I was working on the clocks I found a bug in the clock
management which was fixed with the first patch and should be applied
to v4.16.
The second patch is a small improvement which is aim for v4.17 as well
as the last patch.
Thanks,
Gregory
Gregory CLEMENT (3):
crypto: inside-secure - fix clock management
crypto: inside-secure - improve clock initialization
crypto: inside-secure - fix clock resource by adding a register clock
.../bindings/crypto/inside-secure-safexcel.txt | 6 ++-
drivers/crypto/inside-secure/safexcel.c | 47 +++++++++++++++-------
drivers/crypto/inside-secure/safexcel.h | 1 +
3 files changed, 38 insertions(+), 16 deletions(-)
--
2.16.1
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH 1/3] crypto: inside-secure - fix clock management 2018-03-13 16:48 [PATCH 0/3] crypto: inside-secure: improve clock management Gregory CLEMENT @ 2018-03-13 16:48 ` Gregory CLEMENT 2018-03-13 16:48 ` [PATCH 2/3] crypto: inside-secure - improve clock initialization Gregory CLEMENT ` (2 subsequent siblings) 3 siblings, 0 replies; 6+ messages in thread From: Gregory CLEMENT @ 2018-03-13 16:48 UTC (permalink / raw) To: linux-arm-kernel In this driver the clock is got but never put when the driver is removed or if there is an error in the probe. Using the managed version of clk_get() allows to let the kernel take care of it. Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver") cc: stable at vger.kernel.org Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> --- drivers/crypto/inside-secure/safexcel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/inside-secure/safexcel.c b/drivers/crypto/inside-secure/safexcel.c index 384b4ceb37f0..09adeaa0da6b 100644 --- a/drivers/crypto/inside-secure/safexcel.c +++ b/drivers/crypto/inside-secure/safexcel.c @@ -881,7 +881,7 @@ static int safexcel_probe(struct platform_device *pdev) return PTR_ERR(priv->base); } - priv->clk = of_clk_get(dev->of_node, 0); + priv->clk = devm_clk_get(&pdev->dev, NULL); if (!IS_ERR(priv->clk)) { ret = clk_prepare_enable(priv->clk); if (ret) { -- 2.16.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/3] crypto: inside-secure - improve clock initialization 2018-03-13 16:48 [PATCH 0/3] crypto: inside-secure: improve clock management Gregory CLEMENT 2018-03-13 16:48 ` [PATCH 1/3] crypto: inside-secure - fix " Gregory CLEMENT @ 2018-03-13 16:48 ` Gregory CLEMENT 2018-03-13 16:48 ` [PATCH 3/3] crypto: inside-secure - fix clock resource by adding a register clock Gregory CLEMENT 2018-03-23 16:01 ` [PATCH 0/3] crypto: inside-secure: improve clock management Herbert Xu 3 siblings, 0 replies; 6+ messages in thread From: Gregory CLEMENT @ 2018-03-13 16:48 UTC (permalink / raw) To: linux-arm-kernel The clock is optional, but if it is present we should managed it. If there is an error while trying getting it, we should exit and report this error. So instead of returning an error only in the -EPROBE case, turn it in an other way and ignore the clock only if it is not present (-ENOENT case). Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> --- drivers/crypto/inside-secure/safexcel.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/inside-secure/safexcel.c b/drivers/crypto/inside-secure/safexcel.c index 09adeaa0da6b..cbcb5d9f17bd 100644 --- a/drivers/crypto/inside-secure/safexcel.c +++ b/drivers/crypto/inside-secure/safexcel.c @@ -882,16 +882,17 @@ static int safexcel_probe(struct platform_device *pdev) } priv->clk = devm_clk_get(&pdev->dev, NULL); - if (!IS_ERR(priv->clk)) { + ret = PTR_ERR_OR_ZERO(priv->clk); + /* The clock isn't mandatory */ + if (ret != -ENOENT) { + if (ret) + return ret; + ret = clk_prepare_enable(priv->clk); if (ret) { dev_err(dev, "unable to enable clk (%d)\n", ret); return ret; } - } else { - /* The clock isn't mandatory */ - if (PTR_ERR(priv->clk) == -EPROBE_DEFER) - return -EPROBE_DEFER; } ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)); -- 2.16.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/3] crypto: inside-secure - fix clock resource by adding a register clock 2018-03-13 16:48 [PATCH 0/3] crypto: inside-secure: improve clock management Gregory CLEMENT 2018-03-13 16:48 ` [PATCH 1/3] crypto: inside-secure - fix " Gregory CLEMENT 2018-03-13 16:48 ` [PATCH 2/3] crypto: inside-secure - improve clock initialization Gregory CLEMENT @ 2018-03-13 16:48 ` Gregory CLEMENT 2018-03-23 16:01 ` [PATCH 0/3] crypto: inside-secure: improve clock management Herbert Xu 3 siblings, 0 replies; 6+ messages in thread From: Gregory CLEMENT @ 2018-03-13 16:48 UTC (permalink / raw) To: linux-arm-kernel On Armada 7K/8K we need to explicitly enable the register clock. This clock is optional because not all the SoCs using this IP need it but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updated accordingly. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> --- .../bindings/crypto/inside-secure-safexcel.txt | 6 +++- drivers/crypto/inside-secure/safexcel.c | 34 ++++++++++++++++------ drivers/crypto/inside-secure/safexcel.h | 1 + 3 files changed, 31 insertions(+), 10 deletions(-) diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt index 30c3ce6b502e..5dba55cdfa63 100644 --- a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt +++ b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt @@ -8,7 +8,11 @@ Required properties: - interrupt-names: Should be "ring0", "ring1", "ring2", "ring3", "eip", "mem". Optional properties: -- clocks: Reference to the crypto engine clock. +- clocks: Reference to the crypto engine clocks, the second clock is + needed for the Armada 7K/8K SoCs. +- clock-names: mandatory if there is a second clock, in this case the + name must be "core" for the first clock and "reg" for + the second one. Example: diff --git a/drivers/crypto/inside-secure/safexcel.c b/drivers/crypto/inside-secure/safexcel.c index cbcb5d9f17bd..2f68b4ed5500 100644 --- a/drivers/crypto/inside-secure/safexcel.c +++ b/drivers/crypto/inside-secure/safexcel.c @@ -895,16 +895,30 @@ static int safexcel_probe(struct platform_device *pdev) } } + priv->reg_clk = devm_clk_get(&pdev->dev, "reg"); + ret = PTR_ERR_OR_ZERO(priv->reg_clk); + /* The clock isn't mandatory */ + if (ret != -ENOENT) { + if (ret) + goto err_core_clk; + + ret = clk_prepare_enable(priv->reg_clk); + if (ret) { + dev_err(dev, "unable to enable reg clk (%d)\n", ret); + goto err_core_clk; + } + } + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)); if (ret) - goto err_clk; + goto err_reg_clk; priv->context_pool = dmam_pool_create("safexcel-context", dev, sizeof(struct safexcel_context_record), 1, 0); if (!priv->context_pool) { ret = -ENOMEM; - goto err_clk; + goto err_reg_clk; } safexcel_configure(priv); @@ -919,12 +933,12 @@ static int safexcel_probe(struct platform_device *pdev) &priv->ring[i].cdr, &priv->ring[i].rdr); if (ret) - goto err_clk; + goto err_reg_clk; ring_irq = devm_kzalloc(dev, sizeof(*ring_irq), GFP_KERNEL); if (!ring_irq) { ret = -ENOMEM; - goto err_clk; + goto err_reg_clk; } ring_irq->priv = priv; @@ -936,7 +950,7 @@ static int safexcel_probe(struct platform_device *pdev) ring_irq); if (irq < 0) { ret = irq; - goto err_clk; + goto err_reg_clk; } priv->ring[i].work_data.priv = priv; @@ -947,7 +961,7 @@ static int safexcel_probe(struct platform_device *pdev) priv->ring[i].workqueue = create_singlethread_workqueue(wq_name); if (!priv->ring[i].workqueue) { ret = -ENOMEM; - goto err_clk; + goto err_reg_clk; } priv->ring[i].requests = 0; @@ -968,18 +982,20 @@ static int safexcel_probe(struct platform_device *pdev) ret = safexcel_hw_init(priv); if (ret) { dev_err(dev, "EIP h/w init failed (%d)\n", ret); - goto err_clk; + goto err_reg_clk; } ret = safexcel_register_algorithms(priv); if (ret) { dev_err(dev, "Failed to register algorithms (%d)\n", ret); - goto err_clk; + goto err_reg_clk; } return 0; -err_clk: +err_reg_clk: + clk_disable_unprepare(priv->reg_clk); +err_core_clk: clk_disable_unprepare(priv->clk); return ret; } diff --git a/drivers/crypto/inside-secure/safexcel.h b/drivers/crypto/inside-secure/safexcel.h index d8dff65fc311..4efeb0251daf 100644 --- a/drivers/crypto/inside-secure/safexcel.h +++ b/drivers/crypto/inside-secure/safexcel.h @@ -525,6 +525,7 @@ struct safexcel_crypto_priv { void __iomem *base; struct device *dev; struct clk *clk; + struct clk *reg_clk; struct safexcel_config config; enum safexcel_eip_version version; -- 2.16.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 0/3] crypto: inside-secure: improve clock management 2018-03-13 16:48 [PATCH 0/3] crypto: inside-secure: improve clock management Gregory CLEMENT ` (2 preceding siblings ...) 2018-03-13 16:48 ` [PATCH 3/3] crypto: inside-secure - fix clock resource by adding a register clock Gregory CLEMENT @ 2018-03-23 16:01 ` Herbert Xu 2018-03-23 16:30 ` Gregory CLEMENT 3 siblings, 1 reply; 6+ messages in thread From: Herbert Xu @ 2018-03-23 16:01 UTC (permalink / raw) To: linux-arm-kernel On Tue, Mar 13, 2018 at 05:48:39PM +0100, Gregory CLEMENT wrote: > Hi, > > This short series fixes the way the clocks are used for the SafeXcel > EIP-197 controller embedded in the Marvell Armada 7K/8K SoCs. On these > SoCs a second one is needed in order to clock the registers. It was > not noticed until now because we relied on the bootloader and also > because the clock driver was wrong. > > Thanks to this fix, it would be possible to fix the clock driver > without introducing a regression. > > While I was working on the clocks I found a bug in the clock > management which was fixed with the first patch and should be applied > to v4.16. I haven't applied it to the crypto 4.16 tree because your other patches depend on it and I don't think the issue doesn't seem to be that severe. In future it would help if you can avoid such dependencies if you wish the patches to go in as soon as possible. > The second patch is a small improvement which is aim for v4.17 as well > as the last patch. > > Thanks, > > Gregory > > Gregory CLEMENT (3): > crypto: inside-secure - fix clock management > crypto: inside-secure - improve clock initialization > crypto: inside-secure - fix clock resource by adding a register clock > > .../bindings/crypto/inside-secure-safexcel.txt | 6 ++- > drivers/crypto/inside-secure/safexcel.c | 47 +++++++++++++++------- > drivers/crypto/inside-secure/safexcel.h | 1 + > 3 files changed, 38 insertions(+), 16 deletions(-) All applied. Thanks. -- Email: Herbert Xu <herbert@gondor.apana.org.au> Home Page: http://gondor.apana.org.au/~herbert/ PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 0/3] crypto: inside-secure: improve clock management 2018-03-23 16:01 ` [PATCH 0/3] crypto: inside-secure: improve clock management Herbert Xu @ 2018-03-23 16:30 ` Gregory CLEMENT 0 siblings, 0 replies; 6+ messages in thread From: Gregory CLEMENT @ 2018-03-23 16:30 UTC (permalink / raw) To: linux-arm-kernel Hi Herbert, On sam., mars 24 2018, Herbert Xu <herbert@gondor.apana.org.au> wrote: > On Tue, Mar 13, 2018 at 05:48:39PM +0100, Gregory CLEMENT wrote: >> Hi, >> >> This short series fixes the way the clocks are used for the SafeXcel >> EIP-197 controller embedded in the Marvell Armada 7K/8K SoCs. On these >> SoCs a second one is needed in order to clock the registers. It was >> not noticed until now because we relied on the bootloader and also >> because the clock driver was wrong. >> >> Thanks to this fix, it would be possible to fix the clock driver >> without introducing a regression. >> >> While I was working on the clocks I found a bug in the clock >> management which was fixed with the first patch and should be applied >> to v4.16. > > I haven't applied it to the crypto 4.16 tree because your other > patches depend on it and I don't think the issue doesn't seem to > be that severe. > > In future it would help if you can avoid such dependencies if you > wish the patches to go in as soon as possible. Yes sure. And I agree with you, the issue is not that severe, so it can wait for 4.17. > >> The second patch is a small improvement which is aim for v4.17 as well >> as the last patch. >> >> Thanks, >> >> Gregory >> >> Gregory CLEMENT (3): >> crypto: inside-secure - fix clock management >> crypto: inside-secure - improve clock initialization >> crypto: inside-secure - fix clock resource by adding a register clock >> >> .../bindings/crypto/inside-secure-safexcel.txt | 6 ++- >> drivers/crypto/inside-secure/safexcel.c | 47 +++++++++++++++------- >> drivers/crypto/inside-secure/safexcel.h | 1 + >> 3 files changed, 38 insertions(+), 16 deletions(-) > > All applied. Thanks. Thanks > -- > Email: Herbert Xu <herbert@gondor.apana.org.au> > Home Page: http://gondor.apana.org.au/~herbert/ > PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt -- Gregory Clement, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-03-23 16:30 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-03-13 16:48 [PATCH 0/3] crypto: inside-secure: improve clock management Gregory CLEMENT 2018-03-13 16:48 ` [PATCH 1/3] crypto: inside-secure - fix " Gregory CLEMENT 2018-03-13 16:48 ` [PATCH 2/3] crypto: inside-secure - improve clock initialization Gregory CLEMENT 2018-03-13 16:48 ` [PATCH 3/3] crypto: inside-secure - fix clock resource by adding a register clock Gregory CLEMENT 2018-03-23 16:01 ` [PATCH 0/3] crypto: inside-secure: improve clock management Herbert Xu 2018-03-23 16:30 ` Gregory CLEMENT
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).