From: icenowy@aosc.io (Icenowy Zheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/9] Analogix ANX6345 RGB-(e)DP bridge support
Date: Thu, 18 Oct 2018 15:33:18 +0800 [thread overview]
Message-ID: <20181018073327.64942-1-icenowy@aosc.io> (raw)
This patchset brings the support for Analogix ANX6345 RGB-(e)DP bridge,
which is used by some Allwinner A64 laptops, such as Pinebook and Olimex
TERES-I.
It reuses some definitions from the ANX78xx driver that already exists
in the kernel tree, but the driver code itself is rewritten, because the
big difference between ANX6345 and ANX78xx.
This patchset also enables the bridge on Pinebook and TERES-I, and a
temporary workaround patch (do not merge) for the dot clock accuracy
problem of sun4i-drm.
This patchset assumes some fixes ([1], [2] and [3]) are already
applied, without them the patchset cannot be tested on the A64 devices
mentioned above.
[1] https://patchwork.kernel.org/patch/10628827/
[2] https://patchwork.kernel.org/patch/10628825/
[3] https://patchwork.kernel.org/patch/10646791/
Chen-Yu Tsai (1):
[DO NOT MERGE] drm/sun4i: rgb: Add 5% tolerance to dot clock frequency
check
Icenowy Zheng (8):
drm/bridge: move ANA78xx driver to analogix subdirectory
drm/bridge: split some definitions of ANX78xx to dedicated headers
drm/bridge: extract some Analogix I2C DP common code
dt-bindings: Add ANX6345 DP/eDP transmitter binding
drm/bridge: Add Analogix anx6345 support
arm64: allwinner: a64: add pinmux for RGB666 LCD
arm64: allwinner: a64: enable ANX6345 bridge on Pinebook
arm64: allwinner: a64: enable ANX6345 bridge on TERES-I
.../bindings/display/bridge/anx6345.txt | 39 +
.../dts/allwinner/sun50i-a64-pinebook.dts | 43 +
.../boot/dts/allwinner/sun50i-a64-teres-i.dts | 40 +-
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 9 +
drivers/gpu/drm/bridge/Kconfig | 10 -
drivers/gpu/drm/bridge/Makefile | 4 +-
drivers/gpu/drm/bridge/analogix-anx78xx.h | 719 ---------------
drivers/gpu/drm/bridge/analogix/Kconfig | 25 +
drivers/gpu/drm/bridge/analogix/Makefile | 4 +
.../drm/bridge/analogix/analogix-anx6345.c | 862 ++++++++++++++++++
.../bridge/{ => analogix}/analogix-anx78xx.c | 146 +--
.../drm/bridge/analogix/analogix-anx78xx.h | 265 ++++++
.../drm/bridge/analogix/analogix-i2c-dptx.c | 169 ++++
.../drm/bridge/analogix/analogix-i2c-dptx.h | 258 ++++++
.../bridge/analogix/analogix-i2c-txcommon.h | 240 +++++
drivers/gpu/drm/sun4i/sun4i_rgb.c | 5 +-
16 files changed, 1956 insertions(+), 882 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.txt
delete mode 100644 drivers/gpu/drm/bridge/analogix-anx78xx.h
create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
rename drivers/gpu/drm/bridge/{ => analogix}/analogix-anx78xx.c (90%)
create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
--
2.18.1
next reply other threads:[~2018-10-18 7:33 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-18 7:33 Icenowy Zheng [this message]
2018-10-18 7:33 ` [PATCH 1/9] drm/bridge: move ANA78xx driver to analogix subdirectory Icenowy Zheng
2018-10-18 8:47 ` Laurent Pinchart
2018-10-18 7:33 ` [PATCH 2/9] drm/bridge: split some definitions of ANX78xx to dedicated headers Icenowy Zheng
2018-10-18 7:33 ` [PATCH 3/9] drm/bridge: extract some Analogix I2C DP common code Icenowy Zheng
2018-10-18 7:33 ` [PATCH 4/9] dt-bindings: Add ANX6345 DP/eDP transmitter binding Icenowy Zheng
2018-10-18 8:53 ` Laurent Pinchart
2018-10-18 10:00 ` Icenowy Zheng
2018-10-18 11:23 ` Laurent Pinchart
2018-10-18 12:40 ` Icenowy Zheng
2018-10-25 18:30 ` Rob Herring
2018-10-26 0:08 ` Icenowy Zheng
2018-10-18 7:33 ` [PATCH 5/9] drm/bridge: Add Analogix anx6345 support Icenowy Zheng
2018-10-18 7:33 ` [PATCH 6/9] arm64: allwinner: a64: add pinmux for RGB666 LCD Icenowy Zheng
2018-10-18 7:33 ` [PATCH 7/9] arm64: allwinner: a64: enable ANX6345 bridge on Pinebook Icenowy Zheng
2018-10-18 15:17 ` Vasily Khoruzhick
2018-10-19 5:50 ` Icenowy Zheng
2018-10-18 7:33 ` [PATCH 8/9] arm64: allwinner: a64: enable ANX6345 bridge on TERES-I Icenowy Zheng
2018-10-18 7:33 ` [PATCH 9/9] [DO NOT MERGE] drm/sun4i: rgb: Add 5% tolerance to dot clock frequency check Icenowy Zheng
2018-10-18 8:55 ` Laurent Pinchart
2018-10-18 9:18 ` Daniel Vetter
2018-10-18 9:42 ` Maxime Ripard
2018-10-18 11:31 ` Laurent Pinchart
2018-10-18 12:18 ` Maxime Ripard
2018-10-18 12:50 ` Icenowy Zheng
2018-10-18 13:07 ` Maxime Ripard
2018-10-18 13:57 ` Laurent Pinchart
2019-02-03 1:32 ` Vasily Khoruzhick
2018-10-29 2:20 ` [PATCH 0/9] Analogix ANX6345 RGB-(e)DP bridge support Vasily Khoruzhick
2019-02-04 12:22 ` Torsten Duwe
2019-02-04 20:21 ` Vasily Khoruzhick
2019-02-03 18:54 [PATCH RESEND v2 00/12] " Vasily Khoruzhick
2019-02-03 18:54 ` [PATCH RESEND v2 01/12] drm/bridge: move ANA78xx driver to analogix subdirectory Vasily Khoruzhick
2019-02-03 18:54 ` [PATCH RESEND v2 02/12] drm/bridge: split some definitions of ANX78xx to dedicated headers Vasily Khoruzhick
2019-02-03 18:54 ` [PATCH RESEND v2 03/12] drm/bridge: extract some Analogix I2C DP common code Vasily Khoruzhick
2019-02-03 18:54 ` [PATCH RESEND v2 04/12] dt-bindings: Add ANX6345 DP/eDP transmitter binding Vasily Khoruzhick
2019-02-03 18:54 ` [PATCH RESEND v2 05/12] drm/bridge: Add Analogix anx6345 support Vasily Khoruzhick
2019-02-05 13:19 ` Torsten Duwe
2019-02-03 18:54 ` [PATCH RESEND v2 06/12] drm/sun4i: rgb: Add 1% tolerance to dclk frequency check when bridge is connected Vasily Khoruzhick
2019-02-04 14:20 ` Maxime Ripard
2019-02-04 16:26 ` Vasily Khoruzhick
2019-02-04 16:28 ` Icenowy Zheng
2019-02-04 18:50 ` [linux-sunxi] " Vasily Khoruzhick
2019-02-05 15:41 ` Maxime Ripard
2019-02-05 17:49 ` Vasily Khoruzhick
2019-02-06 9:16 ` Maxime Ripard
2019-02-06 11:42 ` Thierry Reding
2019-02-03 18:54 ` [PATCH RESEND v2 07/12] drm/panel: simple: don't fail if we don't have panel desc Vasily Khoruzhick
2019-02-03 18:54 ` [PATCH RESEND v2 08/12] dt-bindings: add binding for generic eDP panel Vasily Khoruzhick
2019-02-04 7:43 ` Thierry Reding
2019-02-04 8:13 ` Vasily Khoruzhick
2019-02-04 8:23 ` Thierry Reding
2019-02-04 9:40 ` Daniel Vetter
2019-02-04 11:22 ` Thierry Reding
2019-02-04 15:59 ` Daniel Vetter
2019-02-04 16:22 ` Thierry Reding
2019-02-05 8:57 ` Daniel Vetter
2019-02-05 10:24 ` Thierry Reding
2019-02-05 16:36 ` Daniel Vetter
2019-02-14 19:51 ` Vasily Khoruzhick
2019-02-14 20:05 ` Vasily Khoruzhick
2019-02-14 20:38 ` Rob Herring
2019-02-14 20:54 ` Vasily Khoruzhick
2019-02-04 16:11 ` Vasily Khoruzhick
2019-02-04 16:27 ` Thierry Reding
2019-02-04 16:39 ` Rob Herring
2019-02-04 17:02 ` [linux-sunxi] " Vasily Khoruzhick
2019-02-04 16:27 ` Rob Herring
2019-02-04 16:56 ` Thierry Reding
2019-02-04 17:07 ` Vasily Khoruzhick
2019-02-04 20:23 ` Rob Herring
2019-02-04 20:26 ` Vasily Khoruzhick
2019-02-04 20:34 ` Rob Herring
2019-02-03 18:54 ` [PATCH RESEND v2 09/12] drm/panel: simple: add " Vasily Khoruzhick
2019-02-03 18:54 ` [PATCH RESEND v2 10/12] arm64: allwinner: a64: add pinmux for RGB666 LCD Vasily Khoruzhick
2019-02-03 18:55 ` [PATCH RESEND v2 11/12] arm64: allwinner: a64: enable LCD-related hardware for Pinebook Vasily Khoruzhick
2019-02-03 18:55 ` [PATCH RESEND v2 12/12] arm64: allwinner: a64: enable LCD-related hardware for TERES-I Vasily Khoruzhick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181018073327.64942-1-icenowy@aosc.io \
--to=icenowy@aosc.io \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).