Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: dianders@chromium.org (Douglas Anderson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] kgdb: Remove irq flags from roundup
Date: Tue, 30 Oct 2018 15:18:42 -0700
Message-ID: <20181030221843.121254-2-dianders@chromium.org> (raw)
In-Reply-To: <20181030221843.121254-1-dianders@chromium.org>

The function kgdb_roundup_cpus() was passed a parameter that was
documented as:

> the flags that will be used when restoring the interrupts. There is
> local_irq_save() call before kgdb_roundup_cpus().

Nobody used those flags.  Anyone who wanted to temporarily turn on
interrupts just did local_irq_enable() and local_irq_disable() without
looking at them.  So we can definitely remove the flags.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

Changes in v2:
- Removing irq flags separated from fixing lockdep splat.

 arch/arc/kernel/kgdb.c     | 2 +-
 arch/arm/kernel/kgdb.c     | 2 +-
 arch/arm64/kernel/kgdb.c   | 2 +-
 arch/hexagon/kernel/kgdb.c | 9 ++-------
 arch/mips/kernel/kgdb.c    | 2 +-
 arch/powerpc/kernel/kgdb.c | 2 +-
 arch/sh/kernel/kgdb.c      | 2 +-
 arch/sparc/kernel/smp_64.c | 2 +-
 arch/x86/kernel/kgdb.c     | 9 ++-------
 include/linux/kgdb.h       | 9 ++-------
 kernel/debug/debug_core.c  | 2 +-
 11 files changed, 14 insertions(+), 29 deletions(-)

diff --git a/arch/arc/kernel/kgdb.c b/arch/arc/kernel/kgdb.c
index 9a3c34af2ae8..0932851028e0 100644
--- a/arch/arc/kernel/kgdb.c
+++ b/arch/arc/kernel/kgdb.c
@@ -197,7 +197,7 @@ static void kgdb_call_nmi_hook(void *ignored)
 	kgdb_nmicallback(raw_smp_processor_id(), NULL);
 }
 
-void kgdb_roundup_cpus(unsigned long flags)
+void kgdb_roundup_cpus(void)
 {
 	local_irq_enable();
 	smp_call_function(kgdb_call_nmi_hook, NULL, 0);
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index caa0dbe3dc61..f21077b077be 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -175,7 +175,7 @@ static void kgdb_call_nmi_hook(void *ignored)
        kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
 }
 
-void kgdb_roundup_cpus(unsigned long flags)
+void kgdb_roundup_cpus(void)
 {
        local_irq_enable();
        smp_call_function(kgdb_call_nmi_hook, NULL, 0);
diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c
index a20de58061a8..12c339ff6e75 100644
--- a/arch/arm64/kernel/kgdb.c
+++ b/arch/arm64/kernel/kgdb.c
@@ -289,7 +289,7 @@ static void kgdb_call_nmi_hook(void *ignored)
 	kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
 }
 
-void kgdb_roundup_cpus(unsigned long flags)
+void kgdb_roundup_cpus(void)
 {
 	local_irq_enable();
 	smp_call_function(kgdb_call_nmi_hook, NULL, 0);
diff --git a/arch/hexagon/kernel/kgdb.c b/arch/hexagon/kernel/kgdb.c
index 16c24b22d0b2..012e0e230ac2 100644
--- a/arch/hexagon/kernel/kgdb.c
+++ b/arch/hexagon/kernel/kgdb.c
@@ -119,17 +119,12 @@ void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
 
 /**
  * kgdb_roundup_cpus - Get other CPUs into a holding pattern
- * @flags: Current IRQ state
  *
  * On SMP systems, we need to get the attention of the other CPUs
  * and get them be in a known state.  This should do what is needed
  * to get the other CPUs to call kgdb_wait(). Note that on some arches,
  * the NMI approach is not used for rounding up all the CPUs. For example,
- * in case of MIPS, smp_call_function() is used to roundup CPUs. In
- * this case, we have to make sure that interrupts are enabled before
- * calling smp_call_function(). The argument to this function is
- * the flags that will be used when restoring the interrupts. There is
- * local_irq_save() call before kgdb_roundup_cpus().
+ * in case of MIPS, smp_call_function() is used to roundup CPUs.
  *
  * On non-SMP systems, this is not called.
  */
@@ -139,7 +134,7 @@ static void hexagon_kgdb_nmi_hook(void *ignored)
 	kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
 }
 
-void kgdb_roundup_cpus(unsigned long flags)
+void kgdb_roundup_cpus(void)
 {
 	local_irq_enable();
 	smp_call_function(hexagon_kgdb_nmi_hook, NULL, 0);
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index eb6c0d582626..2b05effc17b4 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -219,7 +219,7 @@ static void kgdb_call_nmi_hook(void *ignored)
 	set_fs(old_fs);
 }
 
-void kgdb_roundup_cpus(unsigned long flags)
+void kgdb_roundup_cpus(void)
 {
 	local_irq_enable();
 	smp_call_function(kgdb_call_nmi_hook, NULL, 0);
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 59c578f865aa..b0e804844be0 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -124,7 +124,7 @@ static int kgdb_call_nmi_hook(struct pt_regs *regs)
 }
 
 #ifdef CONFIG_SMP
-void kgdb_roundup_cpus(unsigned long flags)
+void kgdb_roundup_cpus(void)
 {
 	smp_send_debugger_break();
 }
diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c
index 4f04c6638a4d..cc57630f6bf2 100644
--- a/arch/sh/kernel/kgdb.c
+++ b/arch/sh/kernel/kgdb.c
@@ -319,7 +319,7 @@ static void kgdb_call_nmi_hook(void *ignored)
 	kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
 }
 
-void kgdb_roundup_cpus(unsigned long flags)
+void kgdb_roundup_cpus(void)
 {
 	local_irq_enable();
 	smp_call_function(kgdb_call_nmi_hook, NULL, 0);
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index d3ea1f3c06a0..68098bbf3705 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1014,7 +1014,7 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page)
 }
 
 #ifdef CONFIG_KGDB
-void kgdb_roundup_cpus(unsigned long flags)
+void kgdb_roundup_cpus(void)
 {
 	smp_cross_call(&xcall_kgdb_capture, 0, 0, 0);
 }
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 8e36f249646e..ac6291a4178d 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -422,21 +422,16 @@ static void kgdb_disable_hw_debug(struct pt_regs *regs)
 #ifdef CONFIG_SMP
 /**
  *	kgdb_roundup_cpus - Get other CPUs into a holding pattern
- *	@flags: Current IRQ state
  *
  *	On SMP systems, we need to get the attention of the other CPUs
  *	and get them be in a known state.  This should do what is needed
  *	to get the other CPUs to call kgdb_wait(). Note that on some arches,
  *	the NMI approach is not used for rounding up all the CPUs. For example,
- *	in case of MIPS, smp_call_function() is used to roundup CPUs. In
- *	this case, we have to make sure that interrupts are enabled before
- *	calling smp_call_function(). The argument to this function is
- *	the flags that will be used when restoring the interrupts. There is
- *	local_irq_save() call before kgdb_roundup_cpus().
+ *	in case of MIPS, smp_call_function() is used to roundup CPUs.
  *
  *	On non-SMP systems, this is not called.
  */
-void kgdb_roundup_cpus(unsigned long flags)
+void kgdb_roundup_cpus(void)
 {
 	apic->send_IPI_allbutself(APIC_DM_NMI);
 }
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index e465bb15912d..05e5b2eb0d32 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -178,21 +178,16 @@ kgdb_arch_handle_exception(int vector, int signo, int err_code,
 
 /**
  *	kgdb_roundup_cpus - Get other CPUs into a holding pattern
- *	@flags: Current IRQ state
  *
  *	On SMP systems, we need to get the attention of the other CPUs
  *	and get them into a known state.  This should do what is needed
  *	to get the other CPUs to call kgdb_wait(). Note that on some arches,
  *	the NMI approach is not used for rounding up all the CPUs. For example,
- *	in case of MIPS, smp_call_function() is used to roundup CPUs. In
- *	this case, we have to make sure that interrupts are enabled before
- *	calling smp_call_function(). The argument to this function is
- *	the flags that will be used when restoring the interrupts. There is
- *	local_irq_save() call before kgdb_roundup_cpus().
+ *	in case of MIPS, smp_call_function() is used to roundup CPUs.
  *
  *	On non-SMP systems, this is not called.
  */
-extern void kgdb_roundup_cpus(unsigned long flags);
+extern void kgdb_roundup_cpus(void);
 
 /**
  *	kgdb_arch_set_pc - Generic call back to the program counter
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 65c0f1363788..f3cadda45f07 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -593,7 +593,7 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs,
 
 	/* Signal the other CPUs to enter kgdb_wait() */
 	else if ((!kgdb_single_step) && kgdb_do_roundup)
-		kgdb_roundup_cpus(flags);
+		kgdb_roundup_cpus();
 #endif
 
 	/*
-- 
2.19.1.568.g152ad8e336-goog

  reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-30 22:18 [PATCH v2 0/2] kgdb: Fix kgdb_roundup_cpus() Douglas Anderson
2018-10-30 22:18 ` Douglas Anderson [this message]
2018-10-30 22:18 ` [PATCH v2 2/2] kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function() Douglas Anderson
2018-10-31  1:51   ` kbuild test robot
2018-10-31 13:49   ` Peter Zijlstra
2018-10-31 17:01     ` Daniel Thompson
2018-10-31 18:40   ` Daniel Thompson
2018-10-31 21:41     ` Doug Anderson
2018-11-03 10:45       ` Daniel Thompson
2018-11-07  1:04         ` Doug Anderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181030221843.121254-2-dianders@chromium.org \
    --to=dianders@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git