[GIT PULL 0/3] Allwinner Changes - Round 1

[GIT PULL 0/3] Allwinner Changes - Round 1

[Chen-Yu Tsai]

[-- Attachment #1.1: Type: text/plain, Size: 276 bytes --]

Hi Arnd, Olof,

This is the first round of pull requests, including fixes for 5.0,
and DT / DT64 changes for 5.1. We're holding off on the H3/H5 changes
that we normally send, as there might be some changes to them. So
expect a second round of pull requests.


Regards
ChenYu

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[GIT PULL 1/3] Allwinner Fixes for v5.0

[Chen-Yu Tsai]

[-- Attachment #1.1: Type: text/plain, Size: 1888 bytes --]

The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:

  Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-fixes-for-5.0

for you to fetch changes up to b1360dcfdaa1d55952e5ec8dd9d99f88965d7ac9:

  arm64: dts: allwinner: a64: Fix USB OTG regulator (2019-01-10 08:03:48 +0100)

----------------------------------------------------------------
Allwinner Fixes for 5.0

A couple of device tree fixes for the 5.0 cycle:

  - Add missing clock-output-names for the osc24M clock on sun6i/A31

    The Linux clock driver uses the device node as the clock name if
    the property is missing. The node name was changed in 5.0-rc1,
    breaking a subtle dependency in the sunxi-ng clock driver, and
    renders Linux unable to completely boot up.

  - Add alias for Ethernet controller on Beelink X2

    This allows the bootloader to assign a deterministically generated
    MAC address to it.

  - Add property to enable USB VBUS regulator on OrangePi Win

    The board had defined the constraints for the regulator, but was
    missing the property to actually enable it.

----------------------------------------------------------------
Chen-Yu Tsai (1):
      ARM: dts: sun6i: Add clock-output-names to osc24M clock

Jernej Skrabec (2):
      ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2
      arm64: dts: allwinner: a64: Fix USB OTG regulator

Paul Kocialkowski (1):
      arm64: dts: allwinner: a64: Fix the video engine compatible

 arch/arm/boot/dts/sun6i-a31.dtsi                          | 1 +
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts                 | 2 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 1 +
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi             | 2 +-
 4 files changed, 4 insertions(+), 2 deletions(-)

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[GIT PULL 2/3] Allwinner DT Changes for v5.1

[Chen-Yu Tsai]

[-- Attachment #1.1: Type: text/plain, Size: 2745 bytes --]

The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:

  Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-dt-for-5.1

for you to fetch changes up to 55533921301e83162584f87fe571545056d03e09:

  ARM: dts: sun8i-a23-q8: Set compatible string for LCD panel (2019-01-25 10:43:20 +0100)

----------------------------------------------------------------
Allwinner DT changes for 5.1

As usual, this is a random assortment of changes:

  - ARM PMU is enabled on the A10
  - The first usage of the PIO pinbank regulator supplies added,
    for the Bananapi
  - Broadcom-based Bluetooth enabled on the Bananapi M2 Magic and M2
    Ultra, using the serdev bindings
  - Video codec added for the A10
  - Display pipeline for the A23 added and enabled for the generic Q8
    tablets

----------------------------------------------------------------
Chen-Yu Tsai (10):
      ARM: dts: sun8i: r40: Add pinmux settings for UART3 on PG pingroup
      ARM: dts: sun8i: r40: Add pinmux setting for CLK_OUT_A
      ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix WiFi regulator definitions
      ARM: dts: sun8i: r40: bananapi-m2-ultra: Add Bluetooth device node
      ARM: dts: sunxi: bananapi-m2-plus: Add Bluetooth device node
      ARM: dts: sun8i-a23-a33: Move NAND controller device node to sort by address
      ARM: dts: sun8i-a33: Move display pipeline nodes to a23/a33 common dtsi
      ARM: dts: sun8i-a23: Add compatible strings to display pipeline device nodes
      ARM: dts: sun8i-q8-common: Enable display pipeline with RGB LCD panel
      ARM: dts: sun8i-a23-q8: Set compatible string for LCD panel

Harald Geyer (1):
      ARM: dts: sun4i-a10: Add PMU node

Maxime Ripard (1):
      ARM: dts: sun7i: bananapi: Add GPIO banks regulators

Paul Kocialkowski (2):
      ARM: dts: sun4i: Add support for the C1 SRAM region with the SRAM controller
      ARM: dts: sun4i-a10: Add Video Engine and reserved memory nodes

 arch/arm/boot/dts/sun4i-a10.dtsi                  |  44 +++++
 arch/arm/boot/dts/sun7i-a20-bananapi.dts          |   5 +
 arch/arm/boot/dts/sun8i-a23-a33.dtsi              | 175 +++++++++++++++++--
 arch/arm/boot/dts/sun8i-a23-q8-tablet.dts         |   4 +
 arch/arm/boot/dts/sun8i-a23.dtsi                  |  20 +++
 arch/arm/boot/dts/sun8i-a33.dtsi                  | 194 +++++-----------------
 arch/arm/boot/dts/sun8i-q8-common.dtsi            |  37 +++++
 arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts |  41 +++++
 arch/arm/boot/dts/sun8i-r40.dtsi                  |  15 ++
 arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi     |  16 +-
 10 files changed, 379 insertions(+), 172 deletions(-)

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[GIT PULL 3/3] Allwinner DT64 Changes for v5.1

[Chen-Yu Tsai]

[-- Attachment #1.1: Type: text/plain, Size: 1256 bytes --]

The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:

  Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-dt64-for-5.1

for you to fetch changes up to 55ec26d6a4241363fa94f15377ebd8f1116fbfd7:

  arm64: dts: allwinner: a64: Enable A64 timer workaround (2019-01-24 18:23:26 +0800)

----------------------------------------------------------------
Allwinner DT64 changes for 5.1

A few small improvements for the A64 this cycle:

  - ARM PMU added
  - Allwinner ARM architected timer workaround enabled
    This works around timer value wrapping found in the Allwinner
    implementation of the ARM architected timer.

----------------------------------------------------------------
Harald Geyer (1):
      arm64: dts: allwinner: a64: Add PMU node

Jonathan Neusch瓣fer (1):
      arm64: dts: allwinner: a64: Fix a typo

Samuel Holland (1):
      arm64: dts: allwinner: a64: Enable A64 timer workaround

 arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts |  2 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi        | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [GIT PULL 1/3] Allwinner Fixes for v5.0

[Arnd Bergmann]

On Mon, Jan 28, 2019 at 3:26 AM Chen-Yu Tsai <wens@csie.org> wrote:
> Allwinner Fixes for 5.0
>
> A couple of device tree fixes for the 5.0 cycle:
>
>   - Add missing clock-output-names for the osc24M clock on sun6i/A31
>
>     The Linux clock driver uses the device node as the clock name if
>     the property is missing. The node name was changed in 5.0-rc1,
>     breaking a subtle dependency in the sunxi-ng clock driver, and
>     renders Linux unable to completely boot up.
>
>   - Add alias for Ethernet controller on Beelink X2
>
>     This allows the bootloader to assign a deterministically generated
>     MAC address to it.
>
>   - Add property to enable USB VBUS regulator on OrangePi Win
>
>     The board had defined the constraints for the regulator, but was
>     missing the property to actually enable it.

Pulled into arm/fixes, thanks!

      Arnd

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [GIT PULL 2/3] Allwinner DT Changes for v5.1

[Arnd Bergmann]

On Mon, Jan 28, 2019 at 3:27 AM Chen-Yu Tsai <wens@csie.org> wrote:
>
> The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
>
>   Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
>
> are available in the Git repository at:
>
>   https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-dt-for-5.1
>
> for you to fetch changes up to 55533921301e83162584f87fe571545056d03e09:
>
>   ARM: dts: sun8i-a23-q8: Set compatible string for LCD panel (2019-01-25 10:43:20 +0100)
>
> ----------------------------------------------------------------
> Allwinner DT changes for 5.1
>
> As usual, this is a random assortment of changes:
>
>   - ARM PMU is enabled on the A10
>   - The first usage of the PIO pinbank regulator supplies added,
>     for the Bananapi
>   - Broadcom-based Bluetooth enabled on the Bananapi M2 Magic and M2
>     Ultra, using the serdev bindings
>   - Video codec added for the A10
>   - Display pipeline for the A23 added and enabled for the generic Q8
>     tablets

Pulled into arm/dt, thanks!

      Arnd

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [GIT PULL 3/3] Allwinner DT64 Changes for v5.1

[Arnd Bergmann]

On Mon, Jan 28, 2019 at 3:29 AM Chen-Yu Tsai <wens@csie.org> wrote:
>
> The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
>
>   Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
>
> are available in the Git repository at:
>
>   https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-dt64-for-5.1
>
> for you to fetch changes up to 55ec26d6a4241363fa94f15377ebd8f1116fbfd7:
>
>   arm64: dts: allwinner: a64: Enable A64 timer workaround (2019-01-24 18:23:26 +0800)
>
> ----------------------------------------------------------------
> Allwinner DT64 changes for 5.1
>
> A few small improvements for the A64 this cycle:
>
>   - ARM PMU added
>   - Allwinner ARM architected timer workaround enabled
>     This works around timer value wrapping found in the Allwinner
>     implementation of the ARM architected timer.
>

Pulled into arm/dt, thanks!

      Arnd

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel