* [PATCH] ARM: dts: BCM5301X: Add basic DT for Phicomm K3
@ 2019-01-20 22:33 Rafał Miłecki
2019-02-01 5:06 ` Florian Fainelli
0 siblings, 1 reply; 2+ messages in thread
From: Rafał Miłecki @ 2019-01-20 22:33 UTC (permalink / raw)
To: Florian Fainelli
Cc: Mark Rutland, devicetree, Hao Dong, Hauke Mehrtens, Rob Herring,
bcm-kernel-feedback-list, Rafał Miłecki, Hamster Tian,
linux-arm-kernel
From: Hao Dong <halbertdong@gmail.com>
This router has BCM4709C0 SoC, 128 MiB NAND flash (MX30LF1G18AC-TI),
512 MiB memory and 3 x LAN and 1 x WAN ports. WiFi chips are
BCM4366C0 x 2. The router has a small LCD and 3 capactive keys driven by
a PIC microcontroller, which is in turn wired to UART1 of main board.
Signed-off-by: Hao Dong <halbertdong@gmail.com>
[rmilecki: drop chosen { }, fix whitespaces, update commit message]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
I've taken OpenWrt submitted DTS and updated it to fit upstream
standards:
1) Dropped chosen { } with duplicated console info
2) Fixed whitespaces
3) Dropped OpenWrt specific info from the commit message:
* LCD software package
* openwrt.org & 4366c0 firmware
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-phicomm-k3.dts | 71 +++++++++++++++++++++++
2 files changed, 72 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-phicomm-k3.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index bd40148a15b2..bbc0f4527c39 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -115,6 +115,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-luxul-xwr-3150-v1.dtb \
bcm47094-netgear-r8500.dtb \
+ bcm47094-phicomm-k3.dtb \
bcm94708.dtb \
bcm94709.dtb \
bcm953012er.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
new file mode 100644
index 000000000000..ec09c0426d16
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Hamster Tian <haotia@gmail.com>
+ * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+ compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Phicomm K3";
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb3_phy {
+ status = "okay";
+};
+
+&nandcs {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0000000 0x0080000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "nvram";
+ reg = <0x0080000 0x0100000>;
+ };
+
+ partition@180000{
+ label = "phicomm";
+ reg = <0x0180000 0x0280000>;
+ read-only;
+ };
+
+ partition@400000 {
+ label = "firmware";
+ reg = <0x0400000 0x7C00000>;
+ compatible = "brcm,trx";
+ };
+ };
+};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Add basic DT for Phicomm K3
2019-01-20 22:33 [PATCH] ARM: dts: BCM5301X: Add basic DT for Phicomm K3 Rafał Miłecki
@ 2019-02-01 5:06 ` Florian Fainelli
0 siblings, 0 replies; 2+ messages in thread
From: Florian Fainelli @ 2019-02-01 5:06 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Rafał Miłecki
Cc: Mark Rutland, devicetree, Hao Dong, Hauke Mehrtens, Rob Herring,
Rafał Miłecki, Hamster Tian, linux-arm-kernel
On Sun, 20 Jan 2019 23:33:27 +0100, Rafał Miłecki <zajec5@gmail.com> wrote:
> From: Hao Dong <halbertdong@gmail.com>
>
> This router has BCM4709C0 SoC, 128 MiB NAND flash (MX30LF1G18AC-TI),
> 512 MiB memory and 3 x LAN and 1 x WAN ports. WiFi chips are
> BCM4366C0 x 2. The router has a small LCD and 3 capactive keys driven by
> a PIC microcontroller, which is in turn wired to UART1 of main board.
>
> Signed-off-by: Hao Dong <halbertdong@gmail.com>
> [rmilecki: drop chosen { }, fix whitespaces, update commit message]
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
Applied to devicetree/next, thanks!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-02-01 5:07 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-20 22:33 [PATCH] ARM: dts: BCM5301X: Add basic DT for Phicomm K3 Rafał Miłecki
2019-02-01 5:06 ` Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).