[PATCH 0/4] arm64: dts: rockchip: rk3399-rockpro64 dts cleanup

[PATCH 0/4] arm64: dts: rockchip: rk3399-rockpro64 dts cleanup

[Akash Gajjar]

this patchset adds below various changes
- rename regulators name according to rockpro64 schematic.
- remove unused pinmux and regulator node
- rename LED name and set heartbeat default-trigger.
- add usb regulator.

schematic is available here:
http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf

Akash Gajjar (4):
  arm64: dts: rockchip: rockpro64 dts make regulator more readable
  arm64: dts: rockchip: rockpro64 dts remove unused node
  arm64: dts: rockchip: rockpro64 dts rename LED labels and default
    trigger
  arm64: dts: rockchip: rockpro64 dts add usb regulator

 .../boot/dts/rockchip/rk3399-rockpro64.dts    | 93 +++++++++----------
 1 file changed, 43 insertions(+), 50 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/4] arm64: dts: rockchip: rockpro64 dts make regulator more readable

[Akash Gajjar]

rename dc12, vcc_sys, vcc1v8_pmu regulators and make it more redable as per the
schematic of rk3399-rockpro64.

Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>
---
 .../boot/dts/rockchip/rk3399-rockpro64.dts    | 62 +++++++++----------
 1 file changed, 31 insertions(+), 31 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index be78172abc09..49e83ba64045 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -25,15 +25,6 @@
 		#clock-cells = <0>;
 	};
 
-	dc_12v: dc-12v {
-		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -83,6 +74,15 @@
 		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 	};
 
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
 	/* switched by pmic_sleep */
 	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 		compatible = "regulator-fixed";
@@ -103,7 +103,7 @@
 		regulator-name = "vcc3v3_pcie";
 		regulator-always-on;
 		regulator-boot-on;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&vcc12v_dcin>;
 	};
 
 	vcc3v3_sys: vcc3v3-sys {
@@ -113,7 +113,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_sys>;
+		vin-supply = <&vcc5v0_sys>;
 	};
 
 	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
@@ -125,7 +125,7 @@
 		pinctrl-0 = <&vcc5v0_host_en>;
 		regulator-name = "vcc5v0_host";
 		regulator-always-on;
-		vin-supply = <&vcc_sys>;
+		vin-supply = <&vcc5v0_sys>;
 	};
 
 	vcc5v0_typec: vcc5v0-typec-regulator {
@@ -136,17 +136,17 @@
 		pinctrl-0 = <&vcc5v0_typec_en>;
 		regulator-name = "vcc5v0_typec";
 		regulator-always-on;
-		vin-supply = <&vcc_sys>;
+		vin-supply = <&vcc5v0_sys>;
 	};
 
-	vcc_sys: vcc-sys {
+	vcc5v0_sys: vcc5v0-sys {
 		compatible = "regulator-fixed";
-		regulator-name = "vcc_sys";
+		regulator-name = "vcc5v0_sys";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&vcc12v_dcin>;
 	};
 
 	vdd_log: vdd-log {
@@ -157,7 +157,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <800000>;
 		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vcc_sys>;
+		vin-supply = <&vcc5v0_sys>;
 	};
 };
 
@@ -230,18 +230,18 @@
 		rockchip,system-power-controller;
 		wakeup-source;
 
-		vcc1-supply = <&vcc_sys>;
-		vcc2-supply = <&vcc_sys>;
-		vcc3-supply = <&vcc_sys>;
-		vcc4-supply = <&vcc_sys>;
-		vcc6-supply = <&vcc_sys>;
-		vcc7-supply = <&vcc_sys>;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
 		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc_sys>;
-		vcc10-supply = <&vcc_sys>;
-		vcc11-supply = <&vcc_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
 		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc1v8_pmu>;
+		vddio-supply = <&vcca_1v8>;
 
 		regulators {
 			vdd_center: DCDC_REG1 {
@@ -311,8 +311,8 @@
 				};
 			};
 
-			vcc1v8_pmu: LDO_REG3 {
-				regulator-name = "vcc1v8_pmu";
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
@@ -413,7 +413,7 @@
 		regulator-ramp-delay = <1000>;
 		regulator-always-on;
 		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
+		vin-supply = <&vcc5v0_sys>;
 
 		regulator-state-mem {
 			regulator-off-in-suspend;
@@ -432,7 +432,7 @@
 		regulator-ramp-delay = <1000>;
 		regulator-always-on;
 		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
+		vin-supply = <&vcc5v0_sys>;
 
 		regulator-state-mem {
 			regulator-off-in-suspend;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/4] arm64: dts: rockchip: rockpro64 dts remove unused node

[Akash Gajjar]

lcd panel pinmux and vcc1v8_s3 regulator is redundant and has a no impact, so
removing it.

Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>
---
 .../boot/dts/rockchip/rk3399-rockpro64.dts    | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index 49e83ba64045..c9a2b26d7cad 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -83,17 +83,6 @@
 		regulator-max-microvolt = <12000000>;
 	};
 
-	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_1v8>;
-	};
-
 	vcc3v3_pcie: vcc3v3-pcie-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -522,12 +511,6 @@
 		};
 	};
 
-	lcd-panel {
-		lcd_panel_reset: lcd-panel-reset {
-			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
 	pcie {
 		pcie_pwr_en: pcie-pwr-en {
 			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -576,7 +559,7 @@
 };
 
 &saradc {
-	vref-supply = <&vcca1v8_s3>;
+	vref-supply = <&vcca_1v8>;
 	status = "okay";
 };
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/4] arm64: dts: rockchip: rockpro64 dts rename LED labels and default trigger

[Akash Gajjar]

rename white and red LEDs with status and heartbeat respectively.
replace red LED default state off with default-trigger heartbeat.

Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>
---
 .../arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index c9a2b26d7cad..dab53d2eb676 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -43,17 +43,17 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+		pinctrl-0 = <&status_led_gpio>, <&heartbeat_led_gpio>;
 
-		work-led {
-			label = "work";
+		status-led {
+			label = "rockpro64:white:status";
 			default-state = "on";
 			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
 		};
 
-		diy-led {
-			label = "diy";
-			default-state = "off";
+		heartbeat-led {
+			label = "rockpor64:red:heartbeat";
+			linux,default-trigger = "heartbeat";
 			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
 		};
 	};
@@ -502,11 +502,11 @@
 	};
 
 	leds {
-		work_led_gpio: work_led-gpio {
+		status_led_gpio: status-led-gpio {
 			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		diy_led_gpio: diy_led-gpio {
+		heartbeat_led_gpio: heartbeat-led-gpio {
 			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/4] arm64: dts: rockchip: rockpro64 dts add usb regulator

[Akash Gajjar]

vcc5v0_host and vcc5v0_typec is supplied by vcc5v0_usb and not vcc5v0_sys.
add node for vcc5v0_usb fixed regulator.

Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index dab53d2eb676..745aad8ba2d2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -114,7 +114,7 @@
 		pinctrl-0 = <&vcc5v0_host_en>;
 		regulator-name = "vcc5v0_host";
 		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
+		vin-supply = <&vcc5v0_usb>;
 	};
 
 	vcc5v0_typec: vcc5v0-typec-regulator {
@@ -125,7 +125,7 @@
 		pinctrl-0 = <&vcc5v0_typec_en>;
 		regulator-name = "vcc5v0_typec";
 		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
+		vin-supply = <&vcc5v0_usb>;
 	};
 
 	vcc5v0_sys: vcc5v0-sys {
@@ -138,6 +138,16 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/4] arm64: dts: rockchip: rockpro64 dts make regulator more readable

[Heiko Stübner]

Am Mittwoch, 13. Februar 2019, 18:06:37 CET schrieb Akash Gajjar:
> rename dc12, vcc_sys, vcc1v8_pmu regulators and make it more redable as per
> the schematic of rk3399-rockpro64.
> 
> Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>

applied for (hopefully) 5.1

Thanks
Heiko



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/4] arm64: dts: rockchip: rockpro64 dts remove unused node

[Heiko Stübner]

Am Mittwoch, 13. Februar 2019, 18:06:38 CET schrieb Akash Gajjar:
> lcd panel pinmux and vcc1v8_s3 regulator is redundant and has a no impact,
> so removing it.
> 
> Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>

vcc1v8_s3 is actually also a emmc supply, so I'd like to keep it around
for completenes sake.

I've now dropped the regulator portions so that only the lcd-pinmux
gets removed and reworded the commit message accordingly
and applied the result for 5.1

Thanks
Heiko




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/4] arm64: dts: rockchip: rockpro64 dts rename LED labels and default trigger

[Heiko Stübner]

Am Mittwoch, 13. Februar 2019, 18:06:39 CET schrieb Akash Gajjar:
> rename white and red LEDs with status and heartbeat respectively.
> replace red LED default state off with default-trigger heartbeat.
> 
> Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>

Hmm, in the schematics the leds are named work + diy as in the current
devicetree, so I'd like to keep node names + pinctrl matching schematics
please.

And changing the functionality of the LEDs would require a bit more
rationale in the commit message on why that is something we want.


Heiko

> ---
>  .../arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index
> c9a2b26d7cad..dab53d2eb676 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> @@ -43,17 +43,17 @@
>  	leds {
>  		compatible = "gpio-leds";
>  		pinctrl-names = "default";
> -		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
> +		pinctrl-0 = <&status_led_gpio>, <&heartbeat_led_gpio>;
> 
> -		work-led {
> -			label = "work";
> +		status-led {
> +			label = "rockpro64:white:status";
>  			default-state = "on";
>  			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
>  		};
> 
> -		diy-led {
> -			label = "diy";
> -			default-state = "off";
> +		heartbeat-led {
> +			label = "rockpor64:red:heartbeat";
> +			linux,default-trigger = "heartbeat";
>  			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
>  		};
>  	};
> @@ -502,11 +502,11 @@
>  	};
> 
>  	leds {
> -		work_led_gpio: work_led-gpio {
> +		status_led_gpio: status-led-gpio {
>  			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
>  		};
> 
> -		diy_led_gpio: diy_led-gpio {
> +		heartbeat_led_gpio: heartbeat-led-gpio {
>  			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
>  		};
>  	};





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/4] arm64: dts: rockchip: rockpro64 dts add usb regulator

[Heiko Stübner]

Am Mittwoch, 13. Februar 2019, 18:06:40 CET schrieb Akash Gajjar:
> vcc5v0_host and vcc5v0_typec is supplied by vcc5v0_usb and not vcc5v0_sys.
> add node for vcc5v0_usb fixed regulator.
> 
> Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>

applied for (hopefully) 5.1

Thanks
Heiko



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/4] arm64: dts: rockchip: rockpro64 dts remove unused node

[agajjar]

On 2/15/2019 2:48 PM, Heiko Stübner wrote:
> Am Mittwoch, 13. Februar 2019, 18:06:38 CET schrieb Akash Gajjar:
>> lcd panel pinmux and vcc1v8_s3 regulator is redundant and has a no impact,
>> so removing it.
>>
>> Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>
Hi Heiko,
> vcc1v8_s3 is actually also a emmc supply, so I'd like to keep it around
> for completenes sake.

Emmc module is supplied by PMIC vcc3v3_s3 (SWITCH_REG1) and vcc_1v8 
(DCD_REG4).

So I believe removing vcc1v8_s3 has no impact on emmc supply line.


Thanks,
Akash

>
> I've now dropped the regulator portions so that only the lcd-pinmux
> gets removed and reworded the commit message accordingly
> and applied the result for 5.1
>
> Thanks
> Heiko
>
>
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/4] arm64: dts: rockchip: rockpro64 dts remove unused node

[Heiko Stübner]

Am Freitag, 15. Februar 2019, 13:08:16 CET schrieb agajjar:
> On 2/15/2019 2:48 PM, Heiko Stübner wrote:
> > Am Mittwoch, 13. Februar 2019, 18:06:38 CET schrieb Akash Gajjar:
> >> lcd panel pinmux and vcc1v8_s3 regulator is redundant and has a no
> >> impact,
> >> so removing it.
> >> 
> >> Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>
> 
> Hi Heiko,
> 
> > vcc1v8_s3 is actually also a emmc supply, so I'd like to keep it around
> > for completenes sake.
> 
> Emmc module is supplied by PMIC vcc3v3_s3 (SWITCH_REG1) and vcc_1v8
> (DCD_REG4).
> 
> So I believe removing vcc1v8_s3 has no impact on emmc supply line.

looking at the rockpro64 schematics page 10, I see vcca1v8_s3 linked
to the emmc_vdd_1v8 input and obviously also as reference for the saradc.

So I think we really could keep it around, so that the power-tree resembles
the schematics more.



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/4] arm64: dts: rockchip: rockpro64 dts remove unused node

[agajjar]

On 2/16/2019 2:16 AM, Heiko Stübner wrote:
> Am Freitag, 15. Februar 2019, 13:08:16 CET schrieb agajjar:
>> On 2/15/2019 2:48 PM, Heiko Stübner wrote:
>>> Am Mittwoch, 13. Februar 2019, 18:06:38 CET schrieb Akash Gajjar:
>>>> lcd panel pinmux and vcc1v8_s3 regulator is redundant and has a no
>>>> impact,
>>>> so removing it.
>>>>
>>>> Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>
>> Hi Heiko,
>>
>>> vcc1v8_s3 is actually also a emmc supply, so I'd like to keep it around
>>> for completenes sake.
>> Emmc module is supplied by PMIC vcc3v3_s3 (SWITCH_REG1) and vcc_1v8
>> (DCD_REG4).
>>
>> So I believe removing vcc1v8_s3 has no impact on emmc supply line.
> looking at the rockpro64 schematics page 10, I see vcca1v8_s3 linked
> to the emmc_vdd_1v8 input and obviously also as reference for the saradc.

You are referring Pilot production release (rockpro64_v20-SCH.pdf), 
please refer Second batch production release (rockpro64_v21-SCH.pdf).

both the schematic release is available at 
http://wiki.pine64.org/index.php/ROCKPro64_Main_Page

>
> So I think we really could keep it around, so that the power-tree resembles
> the schematics more.

Thanks,

Akash


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel