From: Joseph Lo <josephl@nvidia.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tegra@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Joseph Lo <josephl@nvidia.com>
Subject: [PATCH V7 0/8] Add CPUidle support for Tegra210
Date: Thu, 21 Feb 2019 15:21:42 +0800 [thread overview]
Message-ID: <20190221072150.4395-1-josephl@nvidia.com> (raw)
This patch series adds CPUidle support for Tegra210, which supports
cpu-sleep state for CPU cores. And due to arch timer cannot work
across CPU core power-down and power on reset signal event. We introduce
Tegra210 timer driver to work as clock event device. So it can be the
wake-up source of CPU cores when they idled in the power-down state.
Fix in V7:
* kconfig fix for 'depends on ARM || ARM64'
* move suspend/resume to clkevt
* refine the usage of the macro of TIMER_OF_DECLARE
* update the 'entry/exit-latency-us' properties in the idle-states node
* add one patch for Shield platform support
Fix in V6:
* refine the timer defines in the timer driver (PATCH 2)
* add ack tags from Jon Hunter.
Fixed in V5:
* Just resend this whole series again with timer and Tegra maintainers
included
Fixed in V4:
* merge timer-tegra210.c into timer-tegra20.c
* add a new patch to select TEGRA_TIMER by default for Tegra210
Fixed in V3:
* use timer-of API for Tegra210 timer driver
Fixed in V2:
* list all the timer IRQs in the binding doc and dts file
* add error clean-up code in timer driver
* add entry-latency-us and exit-latency-us properties for idle-states
DT node
Joseph Lo (7):
dt-bindings: timer: add Tegra210 timer
clocksource: tegra: add Tegra210 timer support
soc/tegra: default select TEGRA_TIMER for Tegra210
arm64: tegra: fix timer node for Tegra210
arm64: tegra: add CPU idle states properties for Tegra210
arm64: tegra: Enable CPU idle support for Jetson TX1
arm64: tegra: Enable CPU idle support for Smaug
arm64: tegra: Enable CPU idle support for Shield
.../bindings/timer/nvidia,tegra210-timer.txt | 36 ++
.../arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 6 +
.../arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 6 +
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 7 +
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 33 +-
drivers/clocksource/Kconfig | 3 +-
drivers/clocksource/timer-tegra20.c | 370 ++++++++++++------
drivers/soc/tegra/Kconfig | 1 +
include/linux/cpuhotplug.h | 1 +
9 files changed, 348 insertions(+), 115 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-02-21 7:22 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-21 7:21 Joseph Lo [this message]
2019-02-21 7:21 ` [PATCH V7 1/8] dt-bindings: timer: add Tegra210 timer Joseph Lo
2019-02-21 7:21 ` [PATCH V7 2/8] clocksource: tegra: add Tegra210 timer support Joseph Lo
2019-02-22 8:43 ` Daniel Lezcano
2019-02-22 9:06 ` Joseph Lo
2019-02-22 9:16 ` Daniel Lezcano
2019-02-21 7:21 ` [PATCH V7 3/8] soc/tegra: default select TEGRA_TIMER for Tegra210 Joseph Lo
2019-02-21 7:21 ` [PATCH V7 4/8] arm64: tegra: fix timer node " Joseph Lo
2019-02-21 7:21 ` [PATCH V7 5/8] arm64: tegra: add CPU idle states properties " Joseph Lo
2019-02-22 8:44 ` Daniel Lezcano
2019-02-21 7:21 ` [PATCH V7 6/8] arm64: tegra: Enable CPU idle support for Jetson TX1 Joseph Lo
2019-02-21 7:21 ` [PATCH V7 7/8] arm64: tegra: Enable CPU idle support for Smaug Joseph Lo
2019-02-21 7:21 ` [PATCH V7 8/8] arm64: tegra: Enable CPU idle support for Shield Joseph Lo
2019-03-28 16:05 ` [PATCH V7 0/8] Add CPUidle support for Tegra210 Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190221072150.4395-1-josephl@nvidia.com \
--to=josephl@nvidia.com \
--cc=daniel.lezcano@linaro.org \
--cc=jonathanh@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-tegra@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).