* [PATCH 2/5] arm64: dts: imx8mq: Add SAI2 node
2019-02-25 13:17 [PATCH 1/5] arm64: dts: imx8mq: Add SDMA nodes Daniel Baluta
@ 2019-02-25 13:17 ` Daniel Baluta
2019-02-25 13:17 ` [PATCH 3/5] arm64: dts: imx8qm: Add SAI pinctrl configuration Daniel Baluta
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Daniel Baluta @ 2019-02-25 13:17 UTC (permalink / raw)
To: shawnguo
Cc: mark.rutland, devicetree, baruch, Abel Vesa, ccaione,
Daniel Baluta, S.j. Wang, angus, linux-kernel, robh+dt,
dl-linux-imx, kernel, Aisheng Dong, agx, festevam, s.hauer,
linux-arm-kernel, l.stach
SAI2 is part of AIPS-3 memory region and it's the DAI through
which the wm8524 codec gets its data.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 87839c5c8a7f..807497450f6a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -489,6 +489,22 @@
status = "disabled";
};
+ sai2: sai@308b0000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mq-sai",
+ "fsl,imx6sx-sai";
+ reg = <0x308b0000 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
+ <&clk IMX8MQ_CLK_DUMMY>,
+ <&clk IMX8MQ_CLK_SAI2_ROOT>,
+ <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
i2c1: i2c@30a20000 {
compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
reg = <0x30a20000 0x10000>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 3/5] arm64: dts: imx8qm: Add SAI pinctrl configuration
2019-02-25 13:17 [PATCH 1/5] arm64: dts: imx8mq: Add SDMA nodes Daniel Baluta
2019-02-25 13:17 ` [PATCH 2/5] arm64: dts: imx8mq: Add SAI2 node Daniel Baluta
@ 2019-02-25 13:17 ` Daniel Baluta
2019-02-25 13:17 ` [PATCH 4/5] arm64: dts: imx8qm: Enable SAI2 for wm8524 codec Daniel Baluta
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Daniel Baluta @ 2019-02-25 13:17 UTC (permalink / raw)
To: shawnguo
Cc: mark.rutland, devicetree, baruch, Abel Vesa, ccaione,
Daniel Baluta, S.j. Wang, angus, linux-kernel, robh+dt,
dl-linux-imx, kernel, Aisheng Dong, agx, festevam, s.hauer,
linux-arm-kernel, l.stach
This sets the pin configuration for SAI pins BLCK/MCLK/FSYNC/DATA.
GPIO_01 is used for mute.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 54737bf1772f..d21ee2a5312c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -223,6 +223,16 @@
>;
};
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
+ MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xd6
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 4/5] arm64: dts: imx8qm: Enable SAI2 for wm8524 codec
2019-02-25 13:17 [PATCH 1/5] arm64: dts: imx8mq: Add SDMA nodes Daniel Baluta
2019-02-25 13:17 ` [PATCH 2/5] arm64: dts: imx8mq: Add SAI2 node Daniel Baluta
2019-02-25 13:17 ` [PATCH 3/5] arm64: dts: imx8qm: Add SAI pinctrl configuration Daniel Baluta
@ 2019-02-25 13:17 ` Daniel Baluta
2019-02-25 13:17 ` [PATCH 5/5] arm64: dts: imx8qm: Enable " Daniel Baluta
2019-02-25 13:23 ` [PATCH 1/5] arm64: dts: imx8mq: Add SDMA nodes Daniel Baluta
4 siblings, 0 replies; 6+ messages in thread
From: Daniel Baluta @ 2019-02-25 13:17 UTC (permalink / raw)
To: shawnguo
Cc: mark.rutland, devicetree, baruch, Abel Vesa, ccaione,
Daniel Baluta, S.j. Wang, angus, linux-kernel, robh+dt,
dl-linux-imx, kernel, Aisheng Dong, agx, festevam, s.hauer,
linux-arm-kernel, l.stach
This enables SAI2 digital audio interface to be used with
wm8524 codec.
wm8524 works only in slave mode, so we make sure that IMX8MQ_CLK_SAI2
has an appropriate frequency in order to easily derive rates divisible
with 8000.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index d21ee2a5312c..58de4a3d6029 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -52,6 +52,15 @@
};
};
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 5/5] arm64: dts: imx8qm: Enable wm8524 codec
2019-02-25 13:17 [PATCH 1/5] arm64: dts: imx8mq: Add SDMA nodes Daniel Baluta
` (2 preceding siblings ...)
2019-02-25 13:17 ` [PATCH 4/5] arm64: dts: imx8qm: Enable SAI2 for wm8524 codec Daniel Baluta
@ 2019-02-25 13:17 ` Daniel Baluta
2019-02-25 13:23 ` [PATCH 1/5] arm64: dts: imx8mq: Add SDMA nodes Daniel Baluta
4 siblings, 0 replies; 6+ messages in thread
From: Daniel Baluta @ 2019-02-25 13:17 UTC (permalink / raw)
To: shawnguo
Cc: mark.rutland, devicetree, baruch, Abel Vesa, ccaione,
Daniel Baluta, S.j. Wang, angus, linux-kernel, robh+dt,
dl-linux-imx, kernel, Aisheng Dong, agx, festevam, s.hauer,
linux-arm-kernel, l.stach
This uses simple-audio-card machine driver adding 1 CPU DAI
and 1 Codec DAI.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 29 ++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 58de4a3d6029..77f590c13ee0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -31,6 +31,35 @@
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ wm8524: audio-codec-0 {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8524";
+ clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+ clock-names = "mclk";
+ wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ sound-wm8524 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "wm8524-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&cpudai>;
+ simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,widgets =
+ "Line", "Left Line Out Jack",
+ "Line", "Right Line Out Jack";
+ simple-audio-card,routing =
+ "Left Line Out Jack", "LINEVOUTL",
+ "Right Line Out Jack", "LINEVOUTR";
+ cpudai: simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+ link_codec: simple-audio-card,codec {
+ sound-dai = <&wm8524>;
+ clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+ };
+ };
};
&fec1 {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH 1/5] arm64: dts: imx8mq: Add SDMA nodes
2019-02-25 13:17 [PATCH 1/5] arm64: dts: imx8mq: Add SDMA nodes Daniel Baluta
` (3 preceding siblings ...)
2019-02-25 13:17 ` [PATCH 5/5] arm64: dts: imx8qm: Enable " Daniel Baluta
@ 2019-02-25 13:23 ` Daniel Baluta
4 siblings, 0 replies; 6+ messages in thread
From: Daniel Baluta @ 2019-02-25 13:23 UTC (permalink / raw)
To: shawnguo
Cc: Aisheng Dong, devicetree, baruch, s.hauer, Abel Vesa,
Anson Huang, ccaione, agx, angus, linux-kernel, robh+dt,
dl-linux-imx, kernel, mark.rutland, festevam, S.j. Wang,
linux-arm-kernel, l.stach
Please ignore this, I sent it from the wrong repo. I swear that I
double checked.
Will sent v2 with correct base.
On Mon, 2019-02-25 at 13:17 +0000, Daniel Baluta wrote:
> SDMA1 is part of AIPS-3 region and SDMA2 is part
> of AIPS-1 region.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> [initial submit in i.MX internal tree]
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> [adaptation for linux-next]
> ---
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22
> ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 9155bd4784eb..87839c5c8a7f 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -234,6 +234,17 @@
> status = "disabled";
> };
>
> + sdma2: sdma@302c0000 {
> + compatible = "fsl,imx8mq-sdma",
> "fsl,imx7d-sdma";
> + reg = <0x302c0000 0x10000>;
> + interrupts = <GIC_SPI 103
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
> + <&clk IMX8MQ_CLK_SDMA2_ROOT>;
> + clock-names = "ipg", "ahb";
> + #dma-cells = <3>;
> + fsl,sdma-ram-script-name =
> "imx/sdma/sdma-imx7d.bin";
> + };
> +
> iomuxc: iomuxc@30330000 {
> compatible = "fsl,imx8mq-iomuxc";
> reg = <0x30330000 0x10000>;
> @@ -575,6 +586,17 @@
> status = "disabled";
> };
>
> + sdma1: sdma@30bd0000 {
> + compatible = "fsl,imx8mq-sdma",
> "fsl,imx7d-sdma";
> + reg = <0x30bd0000 0x10000>;
> + interrupts = <GIC_SPI 2
> IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
> + <&clk IMX8MQ_CLK_SDMA1_ROOT>;
> + clock-names = "ipg", "ahb";
> + #dma-cells = <3>;
> + fsl,sdma-ram-script-name =
> "imx/sdma/sdma-imx7d.bin";
> + };
> +
> fec1: ethernet@30be0000 {
> compatible = "fsl,imx8mq-fec",
> "fsl,imx6sx-fec";
> reg = <0x30be0000 0x10000>;
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread