[PATCH v3 0/2] spi: pxa2xx: Adjust DMA burst size per platform

[PATCH v3 0/2] spi: pxa2xx: Adjust DMA burst size per platform

[Andy Shevchenko]

On some platforms DMA burst size is not the same as hard coded default.
Fix the driver to support them.

In v3:
- drop threshold print since it's easy to calculate constant (Jarkko)
- split one more unrelated change to a separate patch,
  but independent from this series  (Jarkko)

In v2:
- drop unrelated changes (Jarkko, Robert)
- don't include Robert's tag due to changes in the patch

Andy Shevchenko (2):
  spi: pxa2xx: Introduce DMA burst size support
  spi: pxa2xx: Debug print DMA burst size

 drivers/spi/spi-pxa2xx-dma.c   | 4 +++-
 drivers/spi/spi-pxa2xx-pci.c   | 4 ++++
 drivers/spi/spi-pxa2xx.c       | 4 ++++
 include/linux/spi/pxa2xx_spi.h | 1 +
 4 files changed, 12 insertions(+), 1 deletion(-)

-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/2] spi: pxa2xx: Introduce DMA burst size support

[Andy Shevchenko]

Some masters may have different DMA burst size than hard coded default.
In such case respect the value given by DMA burst size provided via
platform data.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/spi/spi-pxa2xx-dma.c   | 4 +++-
 drivers/spi/spi-pxa2xx-pci.c   | 4 ++++
 drivers/spi/spi-pxa2xx.c       | 1 +
 include/linux/spi/pxa2xx_spi.h | 1 +
 4 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c
index 15592598273e..17424cc98006 100644
--- a/drivers/spi/spi-pxa2xx-dma.c
+++ b/drivers/spi/spi-pxa2xx-dma.c
@@ -239,13 +239,15 @@ int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
 					   u32 *threshold)
 {
 	struct pxa2xx_spi_chip *chip_info = spi->controller_data;
+	struct driver_data *drv_data = spi_controller_get_devdata(spi->controller);
+	u32 dma_burst_size = drv_data->master_info->dma_burst_size;
 
 	/*
 	 * If the DMA burst size is given in chip_info we use that,
 	 * otherwise we use the default. Also we use the default FIFO
 	 * thresholds for now.
 	 */
-	*burst_code = chip_info ? chip_info->dma_burst_size : 1;
+	*burst_code = chip_info ? chip_info->dma_burst_size : dma_burst_size;
 	*threshold = SSCR1_RxTresh(RX_THRESH_DFLT)
 		   | SSCR1_TxTresh(TX_THRESH_DFLT);
 
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 1727fdfbac28..33029ca0687a 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -35,6 +35,8 @@ struct pxa_spi_info {
 	void *tx_param;
 	void *rx_param;
 
+	int dma_burst_size;
+
 	int (*setup)(struct pci_dev *pdev, struct pxa_spi_info *c);
 };
 
@@ -133,6 +135,7 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 	rx->dma_dev = &dma_dev->dev;
 
 	c->dma_filter = lpss_dma_filter;
+	c->dma_burst_size = 8;
 	return 0;
 }
 
@@ -223,6 +226,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 	spi_pdata.tx_param = c->tx_param;
 	spi_pdata.rx_param = c->rx_param;
 	spi_pdata.enable_dma = c->rx_param && c->tx_param;
+	spi_pdata.dma_burst_size = c->dma_burst_size ? c->dma_burst_size : 1;
 
 	ssp = &spi_pdata.ssp;
 	ssp->phys_base = pci_resource_start(dev, 0);
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index b6ddba833d02..461c6b796b8f 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1564,6 +1564,7 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev)
 	pdata->is_slave = of_property_read_bool(pdev->dev.of_node, "spi-slave");
 	pdata->num_chipselect = 1;
 	pdata->enable_dma = true;
+	pdata->dma_burst_size = 1;
 
 	return pdata;
 }
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
index c1c59473cef9..6005f0126631 100644
--- a/include/linux/spi/pxa2xx_spi.h
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -25,6 +25,7 @@ struct dma_chan;
 struct pxa2xx_spi_controller {
 	u16 num_chipselect;
 	u8 enable_dma;
+	u8 dma_burst_size;
 	bool is_slave;
 
 	/* DMA engine specific config */
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/2] spi: pxa2xx: Debug print DMA burst size

[Andy Shevchenko]

It's useful during debug to see what DMA burst size is.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/spi/spi-pxa2xx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 461c6b796b8f..f008836f7e27 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1333,6 +1333,9 @@ static int setup(struct spi_device *spi)
 			dev_warn(&spi->dev,
 				 "in setup: DMA burst size reduced to match bits_per_word\n");
 		}
+		dev_dbg(&spi->dev,
+			"in setup: DMA burst size set to %u\n",
+			chip->dma_burst_size);
 	}
 
 	switch (drv_data->ssp_type) {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/2] spi: pxa2xx: Adjust DMA burst size per platform

[Andy Shevchenko]

On Mon, Mar 18, 2019 at 04:41:42PM +0200, Andy Shevchenko wrote:
> On some platforms DMA burst size is not the same as hard coded default.
> Fix the driver to support them.
> 
> In v3:
> - drop threshold print since it's easy to calculate constant (Jarkko)
> - split one more unrelated change to a separate patch,
>   but independent from this series  (Jarkko)

Forgot to rebase.
It will not compile on v5.1-rc1 due to s/master/controller/g changes.

> 
> In v2:
> - drop unrelated changes (Jarkko, Robert)
> - don't include Robert's tag due to changes in the patch
> 
> Andy Shevchenko (2):
>   spi: pxa2xx: Introduce DMA burst size support
>   spi: pxa2xx: Debug print DMA burst size
> 
>  drivers/spi/spi-pxa2xx-dma.c   | 4 +++-
>  drivers/spi/spi-pxa2xx-pci.c   | 4 ++++
>  drivers/spi/spi-pxa2xx.c       | 4 ++++
>  include/linux/spi/pxa2xx_spi.h | 1 +
>  4 files changed, 12 insertions(+), 1 deletion(-)
> 
> -- 
> 2.20.1
> 

-- 
With Best Regards,
Andy Shevchenko



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel