From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Chen-Yu Tsai <wens@csie.org>, Maxime Ripard <maxime.ripard@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 17/28] ARM: dts: sun9i: Remove deprecated pinctrl properties
Date: Mon, 25 Mar 2019 14:52:49 +0100 [thread overview]
Message-ID: <20190325135300.6440-17-maxime.ripard@bootlin.com> (raw)
In-Reply-To: <20190325135300.6440-1-maxime.ripard@bootlin.com>
We switched to the generic pinctrl binding some time ago, yet the GMAC
pinctrl node apparently slipped through. Fix this.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 28ff54d45549..c1aa26db44ae 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -961,11 +961,10 @@
#gpio-cells = <3>;
gmac_rgmii_pins: gmac-rgmii-pins {
- allwinner,pins = "PA0", "PA1", "PA2", "PA3",
- "PA4", "PA5", "PA7", "PA8",
- "PA9", "PA10", "PA12", "PA13",
- "PA15", "PA16", "PA17";
- allwinner,function = "gmac";
+ pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5",
+ "PA7", "PA8", "PA9", "PA10", "PA12",
+ "PA13", "PA15", "PA16", "PA17";
+ function = "gmac";
/*
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-25 13:54 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-25 13:52 [PATCH 01/28] dt-bindings: arm: Remove the CPU compatible documentation Maxime Ripard
2019-03-25 13:52 ` [PATCH 02/28] ARM: dts: sun9i: optimus: Fix fixed-regulators Maxime Ripard
2019-03-25 16:49 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 03/28] ARM: dts: sunxi: Remove stale pinctrl-names entry Maxime Ripard
2019-03-25 16:50 ` Chen-Yu Tsai
2019-03-25 20:02 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 04/28] ARM: dts: sun5i: lichee-pi one: " Maxime Ripard
2019-03-25 16:50 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 05/28] ARM: dts: sunxi: Fix GIC compatible Maxime Ripard
2019-03-25 16:50 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 06/28] ARM: dts: sunxi: Switch to new GPIOs properties for i2c-gpio Maxime Ripard
2019-03-25 16:55 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 07/28] ARM: sunxi: Fix the USB PHY ID detect GPIO properties Maxime Ripard
2019-03-25 16:55 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 08/28] ARM: sunxi: Fix the USB PHY VBUS " Maxime Ripard
2019-03-25 16:56 ` Chen-Yu Tsai
2019-03-25 19:41 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 09/28] ARM: dts: sunxi: Fix the TCON output clock Maxime Ripard
2019-03-25 16:58 ` Chen-Yu Tsai
2019-03-25 19:48 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 10/28] ARM: dts: sun8i: tbs-a711: Fix typo in regulators Maxime Ripard
2019-03-25 16:59 ` Chen-Yu Tsai
2019-03-25 19:50 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 11/28] ARM: sunxi: dts: Split USB PHY cells into an array Maxime Ripard
2019-03-25 16:59 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 12/28] ARM: dts: sun8i: r40: Fix AHCI reset-names property Maxime Ripard
2019-03-25 17:00 ` Chen-Yu Tsai
2019-03-25 19:52 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 13/28] ARM: dts: sun8i: r40: Remove useless AHCI properties Maxime Ripard
2019-03-25 17:00 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 14/28] arm64: dts: allwinner: a64: Fix endpoints nodes Maxime Ripard
2019-03-25 17:02 ` Chen-Yu Tsai
2019-03-25 19:57 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 15/28] ARM: dts: sunxi: Remove pinctrl size-cells property Maxime Ripard
2019-03-25 17:02 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 16/28] ARM: dts: sun8i: A23/A33: Fix pinctrl node names Maxime Ripard
2019-03-25 17:02 ` Chen-Yu Tsai
2019-03-25 13:52 ` Maxime Ripard [this message]
2019-03-26 3:03 ` [PATCH 17/28] ARM: dts: sun9i: Remove deprecated pinctrl properties Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 18/28] arm64: dts: allwinner: a64: Add missing PIO clocks Maxime Ripard
2019-03-25 17:04 ` Chen-Yu Tsai
2019-03-25 19:58 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 19/28] arm64: dts: allwinner: Fix pinctrl node names Maxime Ripard
2019-03-25 17:04 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 20/28] ARM: dts: sun8i: h3: Refactor the " Maxime Ripard
2019-03-25 17:06 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 21/28] ARM: dts: sunxi: Add default dr_mode Maxime Ripard
2019-03-25 17:07 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 22/28] ARM: dts: sun8i: h3: " Maxime Ripard
2019-03-26 2:46 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 23/28] arm64: dts: allwinner: a64: " Maxime Ripard
2019-03-26 2:47 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 24/28] ARM: dts: sun8i: a83t: Fix the SPDIF binding Maxime Ripard
2019-03-26 2:48 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 25/28] ARM: dts: sun8i: h3: " Maxime Ripard
2019-03-26 2:53 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 26/28] arm64: dts: allwinner: a64: " Maxime Ripard
2019-03-26 2:54 ` Chen-Yu Tsai
2019-03-26 2:55 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 27/28] arm64: dts: allwinner: a64: Fix the Codec I2S binding Maxime Ripard
2019-03-26 2:55 ` Chen-Yu Tsai
2019-03-25 13:53 ` [PATCH 28/28] ARM: dts: sun8i: a83t: Fix the " Maxime Ripard
2019-03-26 2:58 ` Chen-Yu Tsai
2019-03-25 16:48 ` [PATCH 01/28] dt-bindings: arm: Remove the CPU compatible documentation Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190325135300.6440-17-maxime.ripard@bootlin.com \
--to=maxime.ripard@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).