linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Chen-Yu Tsai <wens@csie.org>, Maxime Ripard <maxime.ripard@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/28] ARM: sunxi: Fix the USB PHY VBUS detect GPIO properties
Date: Mon, 25 Mar 2019 14:52:40 +0100	[thread overview]
Message-ID: <20190325135300.6440-8-maxime.ripard@bootlin.com> (raw)
In-Reply-To: <20190325135300.6440-1-maxime.ripard@bootlin.com>

While the USB PHY Device Tree mandates that the name of the ID detect pin
should be usb0_vbus_det-gpios, a significant number of device tree use
usb0_vbus_det-gpio instead.

This was functional because the GPIO framework falls back to the gpio
suffix that is legacy, but we should fix this.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts        | 2 +-
 arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts       | 2 +-
 arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts           | 2 +-
 arch/arm/boot/dts/sun4i-a10-inet1.dts                  | 2 +-
 arch/arm/boot/dts/sun4i-a10-inet97fv2.dts              | 2 +-
 arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts           | 2 +-
 arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts         | 2 +-
 arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts       | 2 +-
 arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts | 2 +-
 arch/arm/boot/dts/sun5i-a13-licheepi-one.dts           | 2 +-
 arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts        | 2 +-
 arch/arm/boot/dts/sun5i-a13-olinuxino.dts              | 2 +-
 arch/arm/boot/dts/sun5i-gr8-evb.dts                    | 2 +-
 arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi   | 2 +-
 arch/arm/boot/dts/sun6i-a31-hummingbird.dts            | 2 +-
 arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts      | 2 +-
 arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts         | 2 +-
 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts        | 2 +-
 arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts        | 2 +-
 19 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
index 9bfd3804b968..66555e437ce4 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -168,7 +168,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
index 13a49230893c..f7af24cb66e7 100644
--- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
@@ -226,7 +226,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
index aa86e39fa9cc..0cf752a990b9 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -124,7 +124,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts
index 574ecfaa8c3d..2e5c452ca9c6 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts
@@ -236,7 +236,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index 94ee70f38af5..c1ff846cb442 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -212,7 +212,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
index bfa265b582c6..31ba7b93df51 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -378,7 +378,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index f552304b8593..4cbc58363caf 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -232,7 +232,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus-supply   = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
index d543db54116d..cd516543a9e5 100644
--- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
@@ -214,7 +214,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
index 82c89575a1c3..ac3b2221cdef 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
+++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
@@ -198,7 +198,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_ldo3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
index 359983d3d59d..ba8d75b3c716 100644
--- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
+++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
@@ -207,7 +207,7 @@
 
 &usbphy {
 	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_vcc5v0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index f1b1e6f99777..f8dc4bbf249c 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -148,7 +148,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 8948ef24616d..e49596c721a9 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -254,7 +254,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts
index 29cadd9576d1..d003b895a696 100644
--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts
@@ -326,7 +326,7 @@
 
 &usbphy {
 	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
index 8ed381ada577..cf33ad09ef1e 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
@@ -201,7 +201,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_ldo3>;
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 03ae33acfb01..09832b4e8fc8 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -328,7 +328,7 @@
 
 &usbphy {
 	usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
-	usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+	usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
index cce52699ef3e..c34a83f666c7 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -315,7 +315,7 @@
 
 &usbphy {
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index 53043f31fd39..fafe01ee5ea0 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -220,7 +220,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index bd514cb9e8e9..bdf894c054db 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -276,7 +276,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index cfbf7f9feb6d..ba18e14fa229 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -358,7 +358,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-03-25 13:57 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-25 13:52 [PATCH 01/28] dt-bindings: arm: Remove the CPU compatible documentation Maxime Ripard
2019-03-25 13:52 ` [PATCH 02/28] ARM: dts: sun9i: optimus: Fix fixed-regulators Maxime Ripard
2019-03-25 16:49   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 03/28] ARM: dts: sunxi: Remove stale pinctrl-names entry Maxime Ripard
2019-03-25 16:50   ` Chen-Yu Tsai
2019-03-25 20:02     ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 04/28] ARM: dts: sun5i: lichee-pi one: " Maxime Ripard
2019-03-25 16:50   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 05/28] ARM: dts: sunxi: Fix GIC compatible Maxime Ripard
2019-03-25 16:50   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 06/28] ARM: dts: sunxi: Switch to new GPIOs properties for i2c-gpio Maxime Ripard
2019-03-25 16:55   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 07/28] ARM: sunxi: Fix the USB PHY ID detect GPIO properties Maxime Ripard
2019-03-25 16:55   ` Chen-Yu Tsai
2019-03-25 13:52 ` Maxime Ripard [this message]
2019-03-25 16:56   ` [PATCH 08/28] ARM: sunxi: Fix the USB PHY VBUS " Chen-Yu Tsai
2019-03-25 19:41     ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 09/28] ARM: dts: sunxi: Fix the TCON output clock Maxime Ripard
2019-03-25 16:58   ` Chen-Yu Tsai
2019-03-25 19:48     ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 10/28] ARM: dts: sun8i: tbs-a711: Fix typo in regulators Maxime Ripard
2019-03-25 16:59   ` Chen-Yu Tsai
2019-03-25 19:50     ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 11/28] ARM: sunxi: dts: Split USB PHY cells into an array Maxime Ripard
2019-03-25 16:59   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 12/28] ARM: dts: sun8i: r40: Fix AHCI reset-names property Maxime Ripard
2019-03-25 17:00   ` Chen-Yu Tsai
2019-03-25 19:52     ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 13/28] ARM: dts: sun8i: r40: Remove useless AHCI properties Maxime Ripard
2019-03-25 17:00   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 14/28] arm64: dts: allwinner: a64: Fix endpoints nodes Maxime Ripard
2019-03-25 17:02   ` Chen-Yu Tsai
2019-03-25 19:57     ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 15/28] ARM: dts: sunxi: Remove pinctrl size-cells property Maxime Ripard
2019-03-25 17:02   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 16/28] ARM: dts: sun8i: A23/A33: Fix pinctrl node names Maxime Ripard
2019-03-25 17:02   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 17/28] ARM: dts: sun9i: Remove deprecated pinctrl properties Maxime Ripard
2019-03-26  3:03   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 18/28] arm64: dts: allwinner: a64: Add missing PIO clocks Maxime Ripard
2019-03-25 17:04   ` Chen-Yu Tsai
2019-03-25 19:58     ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 19/28] arm64: dts: allwinner: Fix pinctrl node names Maxime Ripard
2019-03-25 17:04   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 20/28] ARM: dts: sun8i: h3: Refactor the " Maxime Ripard
2019-03-25 17:06   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 21/28] ARM: dts: sunxi: Add default dr_mode Maxime Ripard
2019-03-25 17:07   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 22/28] ARM: dts: sun8i: h3: " Maxime Ripard
2019-03-26  2:46   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 23/28] arm64: dts: allwinner: a64: " Maxime Ripard
2019-03-26  2:47   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 24/28] ARM: dts: sun8i: a83t: Fix the SPDIF binding Maxime Ripard
2019-03-26  2:48   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 25/28] ARM: dts: sun8i: h3: " Maxime Ripard
2019-03-26  2:53   ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 26/28] arm64: dts: allwinner: a64: " Maxime Ripard
2019-03-26  2:54   ` Chen-Yu Tsai
2019-03-26  2:55     ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 27/28] arm64: dts: allwinner: a64: Fix the Codec I2S binding Maxime Ripard
2019-03-26  2:55   ` Chen-Yu Tsai
2019-03-25 13:53 ` [PATCH 28/28] ARM: dts: sun8i: a83t: Fix the " Maxime Ripard
2019-03-26  2:58   ` Chen-Yu Tsai
2019-03-25 16:48 ` [PATCH 01/28] dt-bindings: arm: Remove the CPU compatible documentation Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190325135300.6440-8-maxime.ripard@bootlin.com \
    --to=maxime.ripard@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).