* [PATCH v3 1/3] dt-bindings: arm: fsl: Add supported ZII VF610 boards to DT schema
@ 2019-03-25 18:22 Andrey Smirnov
2019-03-25 18:22 ` [PATCH v3 2/3] dt-bindings: arm: fsl: Add support for ZII VF610 SPB4 Andrey Smirnov
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Andrey Smirnov @ 2019-03-25 18:22 UTC (permalink / raw)
To: Shawn Guo
Cc: Andrew Lunn, Rob Herring, Andrey Smirnov, linux-kernel,
devicetree, Chris Healy, Fabio Estevam, linux-arm-kernel
Add already supported ZII VF610 boards to DT schema.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
Documentation/devicetree/bindings/arm/fsl.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 7e2cd6ad26bd..431ca87aa600 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -176,6 +176,18 @@ properties:
- fsl,vf610
- fsl,vf610m4
+ - description: ZII's VF610 based Boards
+ items:
+ - enum:
+ - zii,vf610cfu1 # ZII VF610 CFU1 Board
+ - zii,vf610dev-c # ZII VF610 Development Board, Rev C
+ - zii,vf610dev-b # ZII VF610 Development Board, Rev B
+ - zii,vf610scu4-aib # ZII VF610 SCU4 AIB
+ - zii,vf610dtu # ZII VF610 SSMB DTU Board
+ - zii,vf610spu3 # ZII VF610 SSMB SPU3 Board
+ - const: zii,vf610dev
+ - const: fsl,vf610
+
- description: LS1012A based Boards
items:
- enum:
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3 2/3] dt-bindings: arm: fsl: Add support for ZII VF610 SPB4
2019-03-25 18:22 [PATCH v3 1/3] dt-bindings: arm: fsl: Add supported ZII VF610 boards to DT schema Andrey Smirnov
@ 2019-03-25 18:22 ` Andrey Smirnov
2019-03-27 13:43 ` Rob Herring
2019-03-25 18:22 ` [PATCH v3 3/3] ARM: dts: vf610: Add ZII SPB4 board Andrey Smirnov
` (2 subsequent siblings)
3 siblings, 1 reply; 6+ messages in thread
From: Andrey Smirnov @ 2019-03-25 18:22 UTC (permalink / raw)
To: Shawn Guo
Cc: Andrew Lunn, Rob Herring, Andrey Smirnov, linux-kernel,
devicetree, Chris Healy, Fabio Estevam, linux-arm-kernel
Add support for ZII VF610 SPB4.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 431ca87aa600..fb0a37bf16b8 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -185,6 +185,7 @@ properties:
- zii,vf610scu4-aib # ZII VF610 SCU4 AIB
- zii,vf610dtu # ZII VF610 SSMB DTU Board
- zii,vf610spu3 # ZII VF610 SSMB SPU3 Board
+ - zii,vf610spb4 # ZII VF610 SPB4 Board
- const: zii,vf610dev
- const: fsl,vf610
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3 3/3] ARM: dts: vf610: Add ZII SPB4 board
2019-03-25 18:22 [PATCH v3 1/3] dt-bindings: arm: fsl: Add supported ZII VF610 boards to DT schema Andrey Smirnov
2019-03-25 18:22 ` [PATCH v3 2/3] dt-bindings: arm: fsl: Add support for ZII VF610 SPB4 Andrey Smirnov
@ 2019-03-25 18:22 ` Andrey Smirnov
2019-03-27 13:42 ` [PATCH v3 1/3] dt-bindings: arm: fsl: Add supported ZII VF610 boards to DT schema Rob Herring
2019-03-29 3:13 ` Shawn Guo
3 siblings, 0 replies; 6+ messages in thread
From: Andrey Smirnov @ 2019-03-25 18:22 UTC (permalink / raw)
To: Shawn Guo
Cc: Andrew Lunn, Rob Herring, Andrey Smirnov, linux-kernel,
devicetree, linux-arm-kernel, linux-imx, Fabio Estevam,
Chris Healy, Heiner Kallweit
Add Device Tree for VF610 based Zodiac Seat Power Box.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-imx@nxp.com
---
Changes since [v2]:
- Collected Reviewed-by from Fabio
- Fixed whitespace problems
- Added patches for DT schema
Changes since [v1]:
- Change Makefile diff to keep entries in alphabetical order
- Various node name changes
[v2] lkml.kernel.org/r/20190313070224.30124-1-andrew.smirnov@gmail.com
[v1] lkml.kernel.org/r/20190311184928.25988-1-andrew.smirnov@gmail.com
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/vf610-zii-spb4.dts | 359 +++++++++++++++++++++++++++
2 files changed, 360 insertions(+)
create mode 100644 arch/arm/boot/dts/vf610-zii-spb4.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f4f5aeaf3298..efefce8efa05 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -606,6 +606,7 @@ dtb-$(CONFIG_SOC_VF610) += \
vf610-zii-dev-rev-b.dtb \
vf610-zii-dev-rev-c.dtb \
vf610-zii-scu4-aib.dtb \
+ vf610-zii-spb4.dtb \
vf610-zii-ssmb-dtu.dtb \
vf610-zii-ssmb-spu3.dtb
dtb-$(CONFIG_ARCH_MXS) += \
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts
new file mode 100644
index 000000000000..9dde83ccb9d1
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SPB4 board
+ *
+ * SPB - Seat Power Box
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "ZII VF610 SPB4 Board";
+ compatible = "zii,vf610spb4", "zii,vf610dev", "fsl,vf610";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ led-debug {
+ label = "zii:green:debug1";
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&adc0 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&adc1 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&dspi1 {
+ bus-num = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi1>;
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc0>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ no-sdio;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ switch0: switch0@0 {
+ compatible = "marvell,mv88e6190";
+ pinctrl-0 = <&pinctrl_gpio_switch0>;
+ pinctrl-names = "default";
+ reg = <0>;
+ eeprom-length = <65536>;
+ reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "eth_cu_1000_1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "eth_cu_1000_2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "eth_cu_1000_3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "eth_cu_1000_4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "eth_cu_1000_5";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "eth_cu_1000_6";
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ io-expander@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ label = "nameplate";
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ };
+};
+
+&snvsrtc {
+ status = "disabled";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+
+ rave-sp {
+ compatible = "zii,rave-sp-rdu2";
+ current-speed = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ watchdog {
+ compatible = "zii,rave-sp-watchdog";
+ };
+
+ eeprom@a3 {
+ compatible = "zii,rave-sp-eeprom";
+ reg = <0xa3 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ zii,eeprom-name = "main-eeprom";
+ };
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&wdoga5 {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x1182
+ VF610_PAD_PTD4__DSPI1_CS1 0x1182
+ VF610_PAD_PTC6__DSPI1_SIN 0x1181
+ VF610_PAD_PTC7__DSPI1_SOUT 0x1182
+ VF610_PAD_PTC8__DSPI1_SCK 0x1182
+ >;
+ };
+
+ pinctrl_esdhc0: esdhc0grp {
+ fsl,pins = <
+ VF610_PAD_PTC0__ESDHC0_CLK 0x31ef
+ VF610_PAD_PTC1__ESDHC0_CMD 0x31ef
+ VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef
+ VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef
+ VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef
+ VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef
+ VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef
+ VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef
+ VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef
+ VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+ fsl,pins = <
+ VF610_PAD_PTE2__GPIO_107 0x31c2
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__I2C1_SCL 0x37ff
+ VF610_PAD_PTB17__I2C1_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTD3__GPIO_82 0x31c2
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB23__UART1_TX 0x21a2
+ VF610_PAD_PTB24__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ VF610_PAD_PTA30__UART3_TX 0x21a2
+ VF610_PAD_PTA31__UART3_RX 0x21a1
+ >;
+ };
+};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 1/3] dt-bindings: arm: fsl: Add supported ZII VF610 boards to DT schema
2019-03-25 18:22 [PATCH v3 1/3] dt-bindings: arm: fsl: Add supported ZII VF610 boards to DT schema Andrey Smirnov
2019-03-25 18:22 ` [PATCH v3 2/3] dt-bindings: arm: fsl: Add support for ZII VF610 SPB4 Andrey Smirnov
2019-03-25 18:22 ` [PATCH v3 3/3] ARM: dts: vf610: Add ZII SPB4 board Andrey Smirnov
@ 2019-03-27 13:42 ` Rob Herring
2019-03-29 3:13 ` Shawn Guo
3 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2019-03-27 13:42 UTC (permalink / raw)
To: Andrey Smirnov
Cc: Andrew Lunn, devicetree, Shawn Guo, linux-kernel, Chris Healy,
Fabio Estevam,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
On Mon, Mar 25, 2019 at 1:23 PM Andrey Smirnov <andrew.smirnov@gmail.com> wrote:
>
> Add already supported ZII VF610 boards to DT schema.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 2/3] dt-bindings: arm: fsl: Add support for ZII VF610 SPB4
2019-03-25 18:22 ` [PATCH v3 2/3] dt-bindings: arm: fsl: Add support for ZII VF610 SPB4 Andrey Smirnov
@ 2019-03-27 13:43 ` Rob Herring
0 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2019-03-27 13:43 UTC (permalink / raw)
To: Andrey Smirnov
Cc: Andrew Lunn, devicetree, Shawn Guo, linux-kernel, Chris Healy,
Fabio Estevam,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
On Mon, Mar 25, 2019 at 1:23 PM Andrey Smirnov <andrew.smirnov@gmail.com> wrote:
>
> Add support for ZII VF610 SPB4.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
> 1 file changed, 1 insertion(+)
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 1/3] dt-bindings: arm: fsl: Add supported ZII VF610 boards to DT schema
2019-03-25 18:22 [PATCH v3 1/3] dt-bindings: arm: fsl: Add supported ZII VF610 boards to DT schema Andrey Smirnov
` (2 preceding siblings ...)
2019-03-27 13:42 ` [PATCH v3 1/3] dt-bindings: arm: fsl: Add supported ZII VF610 boards to DT schema Rob Herring
@ 2019-03-29 3:13 ` Shawn Guo
3 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2019-03-29 3:13 UTC (permalink / raw)
To: Andrey Smirnov
Cc: Andrew Lunn, Rob Herring, linux-kernel, devicetree, Chris Healy,
Fabio Estevam, linux-arm-kernel
On Mon, Mar 25, 2019 at 11:22:41AM -0700, Andrey Smirnov wrote:
> Add already supported ZII VF610 boards to DT schema.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Cc: devicetree@vger.kernel.org
Applied all, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-03-29 3:14 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-25 18:22 [PATCH v3 1/3] dt-bindings: arm: fsl: Add supported ZII VF610 boards to DT schema Andrey Smirnov
2019-03-25 18:22 ` [PATCH v3 2/3] dt-bindings: arm: fsl: Add support for ZII VF610 SPB4 Andrey Smirnov
2019-03-27 13:43 ` Rob Herring
2019-03-25 18:22 ` [PATCH v3 3/3] ARM: dts: vf610: Add ZII SPB4 board Andrey Smirnov
2019-03-27 13:42 ` [PATCH v3 1/3] dt-bindings: arm: fsl: Add supported ZII VF610 boards to DT schema Rob Herring
2019-03-29 3:13 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).