linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: andrew@lunn.ch, baruch@tkos.co.il,
	Fabio Estevam <festevam@gmail.com>,
	ken.lin@advantech.com, smoch@web.de,
	stwiss.opensource@diasemi.com, linux-imx@nxp.com,
	kernel@pengutronix.de, Marc Kleine-Budde <mkl@pengutronix.de>,
	aford173@gmail.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] ARM: dts: imx: Fix the AR803X phy-mode
Date: Wed,  3 Apr 2019 19:12:41 -0300	[thread overview]
Message-ID: <20190403221241.4753-1-festevam@gmail.com> (raw)

Commit 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode")
exposed an issue on imx DTS files using AR8031/AR8035 PHYs.

The end result is that the boards can no longer obtain an IP address
via UDHCP, for example.

Quoting Andrew Lunn:

"The problem here is, all the DTs were broken since day 0. However,
because the PHY driver was also broken, nobody noticed and it
worked. Now that the PHY driver has been fixed, all the bugs in the
DTs now become an issue"

To fix this problem, the phy-mode property needs to be "rgmii-id",  which
has the following meaning as per 
Documentation/devicetree/bindings/net/ethernet.txt:

"RGMII with internal RX and TX delays provided by the PHY, the MAC should
not add the RX or TX delays in this case)"

Tested on imx6-sabresd, imx6sx-sdb and imx7d-pico boards with
successfully restored networking.

Based on the initial submission from Steve Twiss for the
imx6qdl-sabresd.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Soeren Moch <smoch@web.de>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Adam Thomson <Adam.Thomson@diasemi.com>
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
Changes since v2:
- Also fixed imx6q-ba16
- Removed stable tag as it does not apply cleanly on older
stable trees. I can manually generate versions for stable
trees after this one hits mainline.

 arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi | 2 +-
 arch/arm/boot/dts/imx6dl-riotboard.dts        | 2 +-
 arch/arm/boot/dts/imx6q-ba16.dtsi             | 2 +-
 arch/arm/boot/dts/imx6q-marsboard.dts         | 2 +-
 arch/arm/boot/dts/imx6q-tbs2910.dts           | 2 +-
 arch/arm/boot/dts/imx6qdl-apf6.dtsi           | 2 +-
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi      | 2 +-
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi        | 2 +-
 arch/arm/boot/dts/imx6qdl-sr-som.dtsi         | 2 +-
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi      | 2 +-
 arch/arm/boot/dts/imx6sx-sabreauto.dts        | 2 +-
 arch/arm/boot/dts/imx6sx-sdb.dtsi             | 2 +-
 arch/arm/boot/dts/imx7d-pico.dtsi             | 2 +-
 13 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
index fb01fa6e4224..3cae139e6396 100644
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -216,7 +216,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_enet>;
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 65c184bb8fb0..d9de49efa802 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -92,7 +92,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index adc9455e42c7..37c63402157b 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -171,7 +171,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
index d8ccb533b6b7..84b30bd6908f 100644
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -110,7 +110,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index 2ce8399a10ba..bfff87ce2e1f 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -98,7 +98,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
index 1ebf29f43a24..4738c3c1ab50 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
@@ -51,7 +51,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 1280de50a984..f3404dd10537 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -292,7 +292,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index a0705066ccba..185fb17a3500 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -202,7 +202,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index 4ccb7afc4b35..6d7f6b9035bc 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -53,7 +53,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-duration = <2>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index b7d5fb421404..50d9a989e06a 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -224,7 +224,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index b0ee324afe58..315044ccd65f 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -75,7 +75,7 @@
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 	fsl,magic-packet;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index 08ede56c3f10..f6972deb5e39 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -191,7 +191,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-supply = <&reg_enet_3v3>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index 3fd595a71202..6f50ebf31a0a 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -92,7 +92,7 @@
 			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	fsl,magic-packet;
 	phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-04-03 22:13 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-03 22:12 Fabio Estevam [this message]
2019-04-11  2:58 ` [PATCH v3] ARM: dts: imx: Fix the AR803X phy-mode Shawn Guo
2019-05-13 17:18 ` George G. Davis
2019-05-14  0:45   ` Sasha Levin
2019-05-14  1:06     ` Florian Fainelli
2019-05-14  1:16     ` George G. Davis
2019-05-14  2:07       ` Sasha Levin
2019-05-14 15:22         ` George G. Davis
2019-05-17 22:25           ` George G. Davis
2019-05-18  6:38             ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190403221241.4753-1-festevam@gmail.com \
    --to=festevam@gmail.com \
    --cc=aford173@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=baruch@tkos.co.il \
    --cc=ken.lin@advantech.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=mkl@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=smoch@web.de \
    --cc=stwiss.opensource@diasemi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).