[PATCH v3 0/4] staging: vchiq: use interruptible waits

[PATCH v3 0/4] staging: vchiq: use interruptible waits

[Nicolas Saenz Julienne]

Hi,
this series tries to address an issue that came up in Raspbian's kernel
tree [1] and upstream distros [2][3].

We adopted some changes that moved wait calls from a custom
implementation to the more standard killable family of functions. Users
complained that all the VCHIQ threads showed up in D state (which is the
expected behaviour).

The custom implementation we deleted tried to mimic the killable family
of functions, yet accepted more signals than the later; SIGKILL |
SIGINT | SIGQUIT | SIGTRAP | SIGSTOP | SIGCONT for the custom
implementation as opposed to plain old SIGKILL.

Raspbian maintainers decided roll back some of those changes and leave
the wait functions as interruptible. Hence creating some divergence
between both trees.

One could argue that not liking having the threads stuck in D state is
not really a software issue. It's more a cosmetic thing that can scare
people when they look at "uptime". On the other hand, if we are ever to
unstage this driver, we'd really need a proper justification for using
the killable family of functions. Which I think it's not really clear at
the moment.

As Raspbian's kernel has been working for a while with interruptible
waits I propose we follow through. If needed we can always go back to
killable. But at least we'll have a proper understanding on the actual
needs. In the end the driver is in staging, and the potential for errors
small.

The first 3 commits fix the issue, and should probably get in as soon as
possible, the last commit is just cosmetic and can wait until 5.3.

Regards,
Nicolas

[1] https://github.com/raspberrypi/linux/issues/2881
[2] https://archlinuxarm.org/forum/viewtopic.php?f=65&t=13485
[3] https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org/message/GBXGJ7DOV5CQQXFPOZCXTRD6W4BEPT4Q/

--

Changes since v2:
  - Cleaned up revert commit message
  - Rebase & merge conflict resolutions
  - Add code cleanup suggested by Dan Carpenter

Changes since v1:
  - Proplery format revert commits
  - Add code comment to remind of this issue
  - Add Fixes tags

Nicolas Saenz Julienne (4):
  staging: vchiq_2835_arm: revert "quit using custom
    down_interruptible()"
  staging: vchiq: revert "switch to wait_for_completion_killable"
  staging: vchiq: make wait events interruptible
  staging: vchiq: stop explicitly comparing with zero to catch errors

 .../bcm2835-camera/bcm2835-camera.c           | 11 ++-
 .../interface/vchiq_arm/vchiq_2835_arm.c      |  2 +-
 .../interface/vchiq_arm/vchiq_arm.c           | 85 +++++++++----------
 .../interface/vchiq_arm/vchiq_connected.c     |  4 +-
 .../interface/vchiq_arm/vchiq_core.c          | 53 +++++++-----
 .../interface/vchiq_arm/vchiq_debugfs.c       |  4 +-
 .../interface/vchiq_arm/vchiq_util.c          |  6 +-
 7 files changed, 82 insertions(+), 83 deletions(-)

-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/4] staging: vchiq_2835_arm: revert "quit using custom down_interruptible()"

[Nicolas Saenz Julienne]

The killable version of down() is meant to be used on situations where
it should not fail at all costs, but still have the convenience of being
able to kill it if really necessary. VCHIQ doesn't fit this criteria, as
it's mainly used as an interface to V4L2 and ALSA devices.

Fixes: ff5979ad8636 ("staging: vchiq_2835_arm: quit using custom down_interruptible()")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 .../staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c  | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
index a9a22917ecdb..49d3b39b1059 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
@@ -514,7 +514,7 @@ create_pagelist(char __user *buf, size_t count, unsigned short type)
 		(g_cache_line_size - 1)))) {
 		char *fragments;
 
-		if (down_killable(&g_free_fragments_sema)) {
+		if (down_interruptible(&g_free_fragments_sema) != 0) {
 			cleanup_pagelistinfo(pagelistinfo);
 			return NULL;
 		}
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/4] staging: vchiq: revert "switch to wait_for_completion_killable"

[Nicolas Saenz Julienne]

The killable version of wait_for_completion() is meant to be used on
situations where it should not fail at all costs, but still have the
convenience of being able to kill it if really necessary. VCHIQ doesn't
fit this criteria, as it's mainly used as an interface to V4L2 and ALSA
devices.

Fixes: a772f116702e ("staging: vchiq: switch to wait_for_completion_killable")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 .../interface/vchiq_arm/vchiq_arm.c           | 21 ++++++++++---------
 .../interface/vchiq_arm/vchiq_core.c          | 21 ++++++++++---------
 .../interface/vchiq_arm/vchiq_util.c          |  6 +++---
 3 files changed, 25 insertions(+), 23 deletions(-)

diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
index ab7d6a0ce94c..62d8f599e765 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -532,7 +532,8 @@ add_completion(VCHIQ_INSTANCE_T instance, VCHIQ_REASON_T reason,
 		vchiq_log_trace(vchiq_arm_log_level,
 			"%s - completion queue full", __func__);
 		DEBUG_COUNT(COMPLETION_QUEUE_FULL_COUNT);
-		if (wait_for_completion_killable(&instance->remove_event)) {
+		if (wait_for_completion_interruptible(
+					&instance->remove_event)) {
 			vchiq_log_info(vchiq_arm_log_level,
 				"service_callback interrupted");
 			return VCHIQ_RETRY;
@@ -643,7 +644,7 @@ service_callback(VCHIQ_REASON_T reason, struct vchiq_header *header,
 			}
 
 			DEBUG_TRACE(SERVICE_CALLBACK_LINE);
-			if (wait_for_completion_killable(
+			if (wait_for_completion_interruptible(
 						&user_service->remove_event)
 				!= 0) {
 				vchiq_log_info(vchiq_arm_log_level,
@@ -978,7 +979,7 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		   has been closed until the client library calls the
 		   CLOSE_DELIVERED ioctl, signalling close_event. */
 		if (user_service->close_pending &&
-			wait_for_completion_killable(
+			wait_for_completion_interruptible(
 				&user_service->close_event))
 			status = VCHIQ_RETRY;
 		break;
@@ -1154,7 +1155,7 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 			DEBUG_TRACE(AWAIT_COMPLETION_LINE);
 			mutex_unlock(&instance->completion_mutex);
-			rc = wait_for_completion_killable(
+			rc = wait_for_completion_interruptible(
 						&instance->insert_event);
 			mutex_lock(&instance->completion_mutex);
 			if (rc != 0) {
@@ -1324,7 +1325,7 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			do {
 				spin_unlock(&msg_queue_spinlock);
 				DEBUG_TRACE(DEQUEUE_MESSAGE_LINE);
-				if (wait_for_completion_killable(
+				if (wait_for_completion_interruptible(
 					&user_service->insert_event)) {
 					vchiq_log_info(vchiq_arm_log_level,
 						"DEQUEUE_MESSAGE interrupted");
@@ -2328,7 +2329,7 @@ vchiq_keepalive_thread_func(void *v)
 	while (1) {
 		long rc = 0, uc = 0;
 
-		if (wait_for_completion_killable(&arm_state->ka_evt)
+		if (wait_for_completion_interruptible(&arm_state->ka_evt)
 				!= 0) {
 			vchiq_log_error(vchiq_susp_log_level,
 				"%s interrupted", __func__);
@@ -2579,7 +2580,7 @@ block_resume(struct vchiq_arm_state *arm_state)
 		write_unlock_bh(&arm_state->susp_res_lock);
 		vchiq_log_info(vchiq_susp_log_level, "%s wait for previously "
 			"blocked clients", __func__);
-		if (wait_for_completion_killable_timeout(
+		if (wait_for_completion_interruptible_timeout(
 				&arm_state->blocked_blocker, timeout_val)
 					<= 0) {
 			vchiq_log_error(vchiq_susp_log_level, "%s wait for "
@@ -2605,7 +2606,7 @@ block_resume(struct vchiq_arm_state *arm_state)
 		write_unlock_bh(&arm_state->susp_res_lock);
 		vchiq_log_info(vchiq_susp_log_level, "%s wait for resume",
 			__func__);
-		if (wait_for_completion_killable_timeout(
+		if (wait_for_completion_interruptible_timeout(
 				&arm_state->vc_resume_complete, timeout_val)
 					<= 0) {
 			vchiq_log_error(vchiq_susp_log_level, "%s wait for "
@@ -2812,7 +2813,7 @@ vchiq_arm_force_suspend(struct vchiq_state *state)
 	do {
 		write_unlock_bh(&arm_state->susp_res_lock);
 
-		rc = wait_for_completion_killable_timeout(
+		rc = wait_for_completion_interruptible_timeout(
 				&arm_state->vc_suspend_complete,
 				msecs_to_jiffies(FORCE_SUSPEND_TIMEOUT_MS));
 
@@ -2908,7 +2909,7 @@ vchiq_arm_allow_resume(struct vchiq_state *state)
 	write_unlock_bh(&arm_state->susp_res_lock);
 
 	if (resume) {
-		if (wait_for_completion_killable(
+		if (wait_for_completion_interruptible(
 			&arm_state->vc_resume_complete) < 0) {
 			vchiq_log_error(vchiq_susp_log_level,
 				"%s interrupted", __func__);
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
index 0c387b6473a5..c65cf1e6f910 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
@@ -560,7 +560,7 @@ reserve_space(struct vchiq_state *state, size_t space, int is_blocking)
 			remote_event_signal(&state->remote->trigger);
 
 			if (!is_blocking ||
-				(wait_for_completion_killable(
+				(wait_for_completion_interruptible(
 				&state->slot_available_event)))
 				return NULL; /* No space available */
 		}
@@ -830,7 +830,7 @@ queue_message(struct vchiq_state *state, struct vchiq_service *service,
 			spin_unlock(&quota_spinlock);
 			mutex_unlock(&state->slot_mutex);
 
-			if (wait_for_completion_killable(
+			if (wait_for_completion_interruptible(
 						&state->data_quota_event))
 				return VCHIQ_RETRY;
 
@@ -861,7 +861,7 @@ queue_message(struct vchiq_state *state, struct vchiq_service *service,
 				service_quota->slot_use_count);
 			VCHIQ_SERVICE_STATS_INC(service, quota_stalls);
 			mutex_unlock(&state->slot_mutex);
-			if (wait_for_completion_killable(
+			if (wait_for_completion_interruptible(
 						&service_quota->quota_event))
 				return VCHIQ_RETRY;
 			if (service->closing)
@@ -1710,7 +1710,8 @@ parse_rx_slots(struct vchiq_state *state)
 					&service->bulk_rx : &service->bulk_tx;
 
 				DEBUG_TRACE(PARSE_LINE);
-				if (mutex_lock_killable(&service->bulk_mutex)) {
+				if (mutex_lock_killable(
+					&service->bulk_mutex) != 0) {
 					DEBUG_TRACE(PARSE_LINE);
 					goto bail_not_ready;
 				}
@@ -2428,7 +2429,7 @@ vchiq_open_service_internal(struct vchiq_service *service, int client_id)
 			       QMFLAGS_IS_BLOCKING);
 	if (status == VCHIQ_SUCCESS) {
 		/* Wait for the ACK/NAK */
-		if (wait_for_completion_killable(&service->remove_event)) {
+		if (wait_for_completion_interruptible(&service->remove_event)) {
 			status = VCHIQ_RETRY;
 			vchiq_release_service_internal(service);
 		} else if ((service->srvstate != VCHIQ_SRVSTATE_OPEN) &&
@@ -2795,7 +2796,7 @@ vchiq_connect_internal(struct vchiq_state *state, VCHIQ_INSTANCE_T instance)
 	}
 
 	if (state->conn_state == VCHIQ_CONNSTATE_CONNECTING) {
-		if (wait_for_completion_killable(&state->connect))
+		if (wait_for_completion_interruptible(&state->connect))
 			return VCHIQ_RETRY;
 
 		vchiq_set_conn_state(state, VCHIQ_CONNSTATE_CONNECTED);
@@ -2894,7 +2895,7 @@ vchiq_close_service(VCHIQ_SERVICE_HANDLE_T handle)
 	}
 
 	while (1) {
-		if (wait_for_completion_killable(&service->remove_event)) {
+		if (wait_for_completion_interruptible(&service->remove_event)) {
 			status = VCHIQ_RETRY;
 			break;
 		}
@@ -2955,7 +2956,7 @@ vchiq_remove_service(VCHIQ_SERVICE_HANDLE_T handle)
 		request_poll(service->state, service, VCHIQ_POLL_REMOVE);
 	}
 	while (1) {
-		if (wait_for_completion_killable(&service->remove_event)) {
+		if (wait_for_completion_interruptible(&service->remove_event)) {
 			status = VCHIQ_RETRY;
 			break;
 		}
@@ -3038,7 +3039,7 @@ VCHIQ_STATUS_T vchiq_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle,
 		VCHIQ_SERVICE_STATS_INC(service, bulk_stalls);
 		do {
 			mutex_unlock(&service->bulk_mutex);
-			if (wait_for_completion_killable(
+			if (wait_for_completion_interruptible(
 						&service->bulk_remove_event)) {
 				status = VCHIQ_RETRY;
 				goto error_exit;
@@ -3115,7 +3116,7 @@ VCHIQ_STATUS_T vchiq_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle,
 
 	if (bulk_waiter) {
 		bulk_waiter->bulk = bulk;
-		if (wait_for_completion_killable(&bulk_waiter->event))
+		if (wait_for_completion_interruptible(&bulk_waiter->event))
 			status = VCHIQ_RETRY;
 		else if (bulk_waiter->actual == VCHIQ_BULK_ACTUAL_ABORTED)
 			status = VCHIQ_ERROR;
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c
index 6c519d8e48cb..8ee85c5e6f77 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c
@@ -50,7 +50,7 @@ void vchiu_queue_push(struct vchiu_queue *queue, struct vchiq_header *header)
 		return;
 
 	while (queue->write == queue->read + queue->size) {
-		if (wait_for_completion_killable(&queue->pop))
+		if (wait_for_completion_interruptible(&queue->pop))
 			flush_signals(current);
 	}
 
@@ -63,7 +63,7 @@ void vchiu_queue_push(struct vchiu_queue *queue, struct vchiq_header *header)
 struct vchiq_header *vchiu_queue_peek(struct vchiu_queue *queue)
 {
 	while (queue->write == queue->read) {
-		if (wait_for_completion_killable(&queue->push))
+		if (wait_for_completion_interruptible(&queue->push))
 			flush_signals(current);
 	}
 
@@ -77,7 +77,7 @@ struct vchiq_header *vchiu_queue_pop(struct vchiu_queue *queue)
 	struct vchiq_header *header;
 
 	while (queue->write == queue->read) {
-		if (wait_for_completion_killable(&queue->push))
+		if (wait_for_completion_interruptible(&queue->push))
 			flush_signals(current);
 	}
 
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 3/4] staging: vchiq: make wait events interruptible

[Nicolas Saenz Julienne]

The killable version of wait_event() is meant to be used on situations
where it should not fail at all costs, but still have the convenience of
being able to kill it if really necessary. Wait events in VCHIQ doesn't
fit this criteria, as it's mainly used as an interface to V4L2 and ALSA
devices.

Fixes: 852b2876a8a8 ("staging: vchiq: rework remove_event handling")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 .../vc04_services/interface/vchiq_arm/vchiq_core.c     | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
index c65cf1e6f910..44bfa890e0e5 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
@@ -395,13 +395,21 @@ remote_event_create(wait_queue_head_t *wq, struct remote_event *event)
 	init_waitqueue_head(wq);
 }
 
+/*
+ * All the event waiting routines in VCHIQ used a custom semaphore
+ * implementation that filtered most signals. This achieved a behaviour similar
+ * to the "killable" family of functions. While cleaning up this code all the
+ * routines where switched to the "interruptible" family of functions, as the
+ * former was deemed unjustified and the use "killable" set all VCHIQ's
+ * threads in D state.
+ */
 static inline int
 remote_event_wait(wait_queue_head_t *wq, struct remote_event *event)
 {
 	if (!event->fired) {
 		event->armed = 1;
 		dsb(sy);
-		if (wait_event_killable(*wq, event->fired)) {
+		if (wait_event_interruptible(*wq, event->fired)) {
 			event->armed = 0;
 			return 0;
 		}
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 4/4] staging: vchiq: stop explicitly comparing with zero to catch errors

[Nicolas Saenz Julienne]

The vchiq code tends to follow a coding pattern that's not accepted as
per the Linux kernel coding style

We have this:
	if (expression != 0)

We want this:
	if (expression)

We make an exception if the expression refers to a size, in which case
it's accepted for the sake of clarity.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 .../bcm2835-camera/bcm2835-camera.c           | 11 ++--
 .../interface/vchiq_arm/vchiq_2835_arm.c      |  2 +-
 .../interface/vchiq_arm/vchiq_arm.c           | 66 ++++++++-----------
 .../interface/vchiq_arm/vchiq_connected.c     |  4 +-
 .../interface/vchiq_arm/vchiq_core.c          | 28 ++++----
 .../interface/vchiq_arm/vchiq_debugfs.c       |  4 +-
 6 files changed, 52 insertions(+), 63 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
index 68f08dc18da9..57f79c153277 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
@@ -327,7 +327,7 @@ static void buffer_cb(struct vchiq_mmal_instance *instance,
 		 "%s: status:%d, buf:%p, length:%lu, flags %u, pts %lld\n",
 		 __func__, status, buf, length, mmal_flags, pts);
 
-	if (status != 0) {
+	if (status) {
 		/* error in transfer */
 		if (buf) {
 			/* there was a buffer with the error so return it */
@@ -359,8 +359,7 @@ static void buffer_cb(struct vchiq_mmal_instance *instance,
 		}
 	} else {
 		if (dev->capture.frame_count) {
-			if (dev->capture.vc_start_timestamp != -1 &&
-			    pts != 0) {
+			if (dev->capture.vc_start_timestamp != -1 && pts) {
 				ktime_t timestamp;
 				s64 runtime_us = pts -
 				    dev->capture.vc_start_timestamp;
@@ -826,7 +825,7 @@ static int vidioc_enum_input(struct file *file, void *priv,
 			     struct v4l2_input *inp)
 {
 	/* only a single camera input */
-	if (inp->index != 0)
+	if (inp->index)
 		return -EINVAL;
 
 	inp->type = V4L2_INPUT_TYPE_CAMERA;
@@ -842,7 +841,7 @@ static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
 
 static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
 {
-	if (i != 0)
+	if (i)
 		return -EINVAL;
 
 	return 0;
@@ -1281,7 +1280,7 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	}
 
 	ret = mmal_setup_components(dev, f);
-	if (ret != 0) {
+	if (ret) {
 		v4l2_err(&dev->v4l2_dev,
 			 "%s: failed to setup mmal components: %d\n",
 			 __func__, ret);
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
index 49d3b39b1059..cb588c0b9364 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
@@ -514,7 +514,7 @@ create_pagelist(char __user *buf, size_t count, unsigned short type)
 		(g_cache_line_size - 1)))) {
 		char *fragments;
 
-		if (down_interruptible(&g_free_fragments_sema) != 0) {
+		if (down_interruptible(&g_free_fragments_sema)) {
 			cleanup_pagelistinfo(pagelistinfo);
 			return NULL;
 		}
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
index 62d8f599e765..9264a07cf160 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -238,7 +238,7 @@ VCHIQ_STATUS_T vchiq_shutdown(VCHIQ_INSTANCE_T instance)
 	vchiq_log_trace(vchiq_core_log_level,
 		"%s(%p) called", __func__, instance);
 
-	if (mutex_lock_killable(&state->mutex) != 0)
+	if (mutex_lock_killable(&state->mutex))
 		return VCHIQ_RETRY;
 
 	/* Remove all services */
@@ -280,7 +280,7 @@ VCHIQ_STATUS_T vchiq_connect(VCHIQ_INSTANCE_T instance)
 	vchiq_log_trace(vchiq_core_log_level,
 		"%s(%p) called", __func__, instance);
 
-	if (mutex_lock_killable(&state->mutex) != 0) {
+	if (mutex_lock_killable(&state->mutex)) {
 		vchiq_log_trace(vchiq_core_log_level,
 			"%s: call to mutex_lock failed", __func__);
 		status = VCHIQ_RETRY;
@@ -645,8 +645,7 @@ service_callback(VCHIQ_REASON_T reason, struct vchiq_header *header,
 
 			DEBUG_TRACE(SERVICE_CALLBACK_LINE);
 			if (wait_for_completion_interruptible(
-						&user_service->remove_event)
-				!= 0) {
+						&user_service->remove_event)) {
 				vchiq_log_info(vchiq_arm_log_level,
 					"%s interrupted", __func__);
 				DEBUG_TRACE(SERVICE_CALLBACK_LINE);
@@ -850,7 +849,7 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			break;
 		}
 		rc = mutex_lock_killable(&instance->state->mutex);
-		if (rc != 0) {
+		if (rc) {
 			vchiq_log_error(vchiq_arm_log_level,
 				"vchiq: connect: could not lock mutex for "
 				"state %d: %d",
@@ -874,9 +873,8 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		void *userdata;
 		int srvstate;
 
-		if (copy_from_user
-			 (&args, (const void __user *)arg,
-			  sizeof(args)) != 0) {
+		if (copy_from_user(&args, (const void __user *)arg,
+				   sizeof(args))) {
 			ret = -EFAULT;
 			break;
 		}
@@ -940,7 +938,7 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 				&(((struct vchiq_create_service __user *)
 					arg)->handle),
 				(const void *)&service->handle,
-				sizeof(service->handle)) != 0) {
+				sizeof(service->handle))) {
 				ret = -EFAULT;
 				vchiq_remove_service(service->handle);
 			}
@@ -1015,9 +1013,8 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case VCHIQ_IOC_QUEUE_MESSAGE: {
 		struct vchiq_queue_message args;
 
-		if (copy_from_user
-			 (&args, (const void __user *)arg,
-			  sizeof(args)) != 0) {
+		if (copy_from_user(&args, (const void __user *)arg,
+				   sizeof(args))) {
 			ret = -EFAULT;
 			break;
 		}
@@ -1049,9 +1046,8 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			(cmd == VCHIQ_IOC_QUEUE_BULK_TRANSMIT) ?
 			VCHIQ_BULK_TRANSMIT : VCHIQ_BULK_RECEIVE;
 
-		if (copy_from_user
-			(&args, (const void __user *)arg,
-			sizeof(args)) != 0) {
+		if (copy_from_user(&args, (const void __user *)arg,
+				   sizeof(args))) {
 			ret = -EFAULT;
 			break;
 		}
@@ -1125,7 +1121,7 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 				&(((struct vchiq_queue_bulk_transfer __user *)
 					arg)->mode),
 				(const void *)&mode_waiting,
-				sizeof(mode_waiting)) != 0)
+				sizeof(mode_waiting)))
 				ret = -EFAULT;
 		}
 	} break;
@@ -1140,7 +1136,7 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		}
 
 		if (copy_from_user(&args, (const void __user *)arg,
-			sizeof(args)) != 0) {
+			sizeof(args))) {
 			ret = -EFAULT;
 			break;
 		}
@@ -1158,7 +1154,7 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			rc = wait_for_completion_interruptible(
 						&instance->insert_event);
 			mutex_lock(&instance->completion_mutex);
-			if (rc != 0) {
+			if (rc) {
 				DEBUG_TRACE(AWAIT_COMPLETION_LINE);
 				vchiq_log_info(vchiq_arm_log_level,
 					"AWAIT_COMPLETION interrupted");
@@ -1224,7 +1220,7 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 					if (copy_from_user(&msgbuf,
 						(const void __user *)
 						&args.msgbufs[msgbufcount],
-						sizeof(msgbuf)) != 0) {
+						sizeof(msgbuf))) {
 						if (ret == 0)
 							ret = -EFAULT;
 						break;
@@ -1232,7 +1228,7 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 					/* Copy the message to user space */
 					if (copy_to_user(msgbuf, header,
-						msglen) != 0) {
+						msglen)) {
 						if (ret == 0)
 							ret = -EFAULT;
 						break;
@@ -1257,8 +1253,7 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 					(size_t)args.buf + ret *
 					sizeof(struct vchiq_completion_data)),
 					completion,
-					sizeof(struct vchiq_completion_data))
-									!= 0) {
+					sizeof(struct vchiq_completion_data))) {
 						if (ret == 0)
 							ret = -EFAULT;
 					break;
@@ -1278,13 +1273,13 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 					&((struct vchiq_await_completion *)arg)
 						->msgbufcount,
 					&msgbufcount,
-					sizeof(msgbufcount)) != 0) {
+					sizeof(msgbufcount))) {
 					ret = -EFAULT;
 				}
 			}
 		}
 
-		if (ret != 0)
+		if (ret)
 			complete(&instance->remove_event);
 		mutex_unlock(&instance->completion_mutex);
 		DEBUG_TRACE(AWAIT_COMPLETION_LINE);
@@ -1296,9 +1291,8 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		struct vchiq_header *header;
 
 		DEBUG_TRACE(DEQUEUE_MESSAGE_LINE);
-		if (copy_from_user
-			 (&args, (const void __user *)arg,
-			  sizeof(args)) != 0) {
+		if (copy_from_user(&args, (const void __user *)arg,
+				   sizeof(args))) {
 			ret = -EFAULT;
 			break;
 		}
@@ -1384,7 +1378,7 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		struct vchiq_config config;
 
 		if (copy_from_user(&args, (const void __user *)arg,
-			sizeof(args)) != 0) {
+				   sizeof(args))) {
 			ret = -EFAULT;
 			break;
 		}
@@ -1403,9 +1397,8 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case VCHIQ_IOC_SET_SERVICE_OPTION: {
 		struct vchiq_set_service_option args;
 
-		if (copy_from_user(
-			&args, (const void __user *)arg,
-			sizeof(args)) != 0) {
+		if (copy_from_user(&args, (const void __user *)arg,
+				   sizeof(args))) {
 			ret = -EFAULT;
 			break;
 		}
@@ -2329,8 +2322,7 @@ vchiq_keepalive_thread_func(void *v)
 	while (1) {
 		long rc = 0, uc = 0;
 
-		if (wait_for_completion_interruptible(&arm_state->ka_evt)
-				!= 0) {
+		if (wait_for_completion_interruptible(&arm_state->ka_evt)) {
 			vchiq_log_error(vchiq_susp_log_level,
 				"%s interrupted", __func__);
 			flush_signals(current);
@@ -3011,7 +3003,7 @@ vchiq_use_internal(struct vchiq_state *state, struct vchiq_service *service,
 			vchiq_log_info(vchiq_susp_log_level, "%s %s resume "
 				"blocked - waiting...", __func__, entity);
 			if (wait_for_completion_killable(
-					&arm_state->resume_blocker) != 0) {
+					&arm_state->resume_blocker)) {
 				vchiq_log_error(vchiq_susp_log_level, "%s %s "
 					"wait for resume blocker interrupted",
 					__func__, entity);
@@ -3060,7 +3052,7 @@ vchiq_use_internal(struct vchiq_state *state, struct vchiq_service *service,
 		vchiq_log_info(vchiq_susp_log_level, "%s %s wait for resume",
 			__func__, entity);
 		if (wait_for_completion_killable(
-				&arm_state->vc_resume_complete) != 0) {
+				&arm_state->vc_resume_complete)) {
 			vchiq_log_error(vchiq_susp_log_level, "%s %s wait for "
 				"resume interrupted", __func__, entity);
 			ret = VCHIQ_ERROR;
@@ -3505,13 +3497,13 @@ static int vchiq_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, drvdata);
 
 	err = vchiq_platform_init(pdev, &g_state);
-	if (err != 0)
+	if (err)
 		goto failed_platform_init;
 
 	cdev_init(&vchiq_cdev, &vchiq_fops);
 	vchiq_cdev.owner = THIS_MODULE;
 	err = cdev_add(&vchiq_cdev, vchiq_devid, 1);
-	if (err != 0) {
+	if (err) {
 		vchiq_log_error(vchiq_arm_log_level,
 			"Unable to register device");
 		goto failed_platform_init;
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_connected.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_connected.c
index e87e6619695e..1640906e3929 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_connected.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_connected.c
@@ -41,7 +41,7 @@ void vchiq_add_connected_callback(VCHIQ_CONNECTED_CALLBACK_T callback)
 {
 	connected_init();
 
-	if (mutex_lock_killable(&g_connected_mutex) != 0)
+	if (mutex_lock_killable(&g_connected_mutex))
 		return;
 
 	if (g_connected)
@@ -76,7 +76,7 @@ void vchiq_call_connected_callbacks(void)
 
 	connected_init();
 
-	if (mutex_lock_killable(&g_connected_mutex) != 0)
+	if (mutex_lock_killable(&g_connected_mutex))
 		return;
 
 	for (i = 0; i <  g_num_deferred_callbacks; i++)
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
index 44bfa890e0e5..44f0eb64952a 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
@@ -800,7 +800,7 @@ queue_message(struct vchiq_state *state, struct vchiq_service *service,
 	WARN_ON(!(stride <= VCHIQ_SLOT_SIZE));
 
 	if (!(flags & QMFLAGS_NO_MUTEX_LOCK) &&
-		(mutex_lock_killable(&state->slot_mutex) != 0))
+	    mutex_lock_killable(&state->slot_mutex))
 		return VCHIQ_RETRY;
 
 	if (type == VCHIQ_MSG_DATA) {
@@ -812,8 +812,8 @@ queue_message(struct vchiq_state *state, struct vchiq_service *service,
 			return VCHIQ_ERROR;
 		}
 
-		WARN_ON((flags & (QMFLAGS_NO_MUTEX_LOCK |
-				  QMFLAGS_NO_MUTEX_UNLOCK)) != 0);
+		WARN_ON(flags & (QMFLAGS_NO_MUTEX_LOCK |
+				 QMFLAGS_NO_MUTEX_UNLOCK));
 
 		if (service->closing) {
 			/* The service has been closed */
@@ -874,7 +874,7 @@ queue_message(struct vchiq_state *state, struct vchiq_service *service,
 				return VCHIQ_RETRY;
 			if (service->closing)
 				return VCHIQ_ERROR;
-			if (mutex_lock_killable(&state->slot_mutex) != 0)
+			if (mutex_lock_killable(&state->slot_mutex))
 				return VCHIQ_RETRY;
 			if (service->srvstate != VCHIQ_SRVSTATE_OPEN) {
 				/* The service has been closed */
@@ -912,8 +912,8 @@ queue_message(struct vchiq_state *state, struct vchiq_service *service,
 			header, size, VCHIQ_MSG_SRCPORT(msgid),
 			VCHIQ_MSG_DSTPORT(msgid));
 
-		WARN_ON((flags & (QMFLAGS_NO_MUTEX_LOCK |
-				  QMFLAGS_NO_MUTEX_UNLOCK)) != 0);
+		WARN_ON(flags & (QMFLAGS_NO_MUTEX_LOCK |
+				 QMFLAGS_NO_MUTEX_UNLOCK));
 
 		callback_result =
 			copy_message_data(copy_callback, context,
@@ -1040,8 +1040,8 @@ queue_message_sync(struct vchiq_state *state, struct vchiq_service *service,
 
 	local = state->local;
 
-	if ((VCHIQ_MSG_TYPE(msgid) != VCHIQ_MSG_RESUME) &&
-		(mutex_lock_killable(&state->sync_mutex) != 0))
+	if (VCHIQ_MSG_TYPE(msgid) != VCHIQ_MSG_RESUME &&
+	    mutex_lock_killable(&state->sync_mutex))
 		return VCHIQ_RETRY;
 
 	remote_event_wait(&state->sync_release_event, &local->sync_release);
@@ -1718,8 +1718,7 @@ parse_rx_slots(struct vchiq_state *state)
 					&service->bulk_rx : &service->bulk_tx;
 
 				DEBUG_TRACE(PARSE_LINE);
-				if (mutex_lock_killable(
-					&service->bulk_mutex) != 0) {
+				if (mutex_lock_killable(&service->bulk_mutex)) {
 					DEBUG_TRACE(PARSE_LINE);
 					goto bail_not_ready;
 				}
@@ -2523,7 +2522,7 @@ do_abort_bulks(struct vchiq_service *service)
 	VCHIQ_STATUS_T status;
 
 	/* Abort any outstanding bulk transfers */
-	if (mutex_lock_killable(&service->bulk_mutex) != 0)
+	if (mutex_lock_killable(&service->bulk_mutex))
 		return 0;
 	abort_outstanding_bulks(service, &service->bulk_tx);
 	abort_outstanding_bulks(service, &service->bulk_rx);
@@ -3038,7 +3037,7 @@ VCHIQ_STATUS_T vchiq_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle,
 	queue = (dir == VCHIQ_BULK_TRANSMIT) ?
 		&service->bulk_tx : &service->bulk_rx;
 
-	if (mutex_lock_killable(&service->bulk_mutex) != 0) {
+	if (mutex_lock_killable(&service->bulk_mutex)) {
 		status = VCHIQ_RETRY;
 		goto error_exit;
 	}
@@ -3052,8 +3051,7 @@ VCHIQ_STATUS_T vchiq_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle,
 				status = VCHIQ_RETRY;
 				goto error_exit;
 			}
-			if (mutex_lock_killable(&service->bulk_mutex)
-				!= 0) {
+			if (mutex_lock_killable(&service->bulk_mutex)) {
 				status = VCHIQ_RETRY;
 				goto error_exit;
 			}
@@ -3081,7 +3079,7 @@ VCHIQ_STATUS_T vchiq_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle,
 
 	/* The slot mutex must be held when the service is being closed, so
 	   claim it here to ensure that isn't happening */
-	if (mutex_lock_killable(&state->slot_mutex) != 0) {
+	if (mutex_lock_killable(&state->slot_mutex)) {
 		status = VCHIQ_RETRY;
 		goto cancel_bulk_error_exit;
 	}
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c
index 2bb9120883fd..f217b78d95a0 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c
@@ -86,7 +86,7 @@ static ssize_t debugfs_log_write(struct file *file,
 	if (count >= DEBUGFS_WRITE_BUF_SIZE)
 		count = DEBUGFS_WRITE_BUF_SIZE;
 
-	if (copy_from_user(kbuf, buffer, count) != 0)
+	if (copy_from_user(kbuf, buffer, count))
 		return -EFAULT;
 	kbuf[count - 1] = 0;
 
@@ -151,7 +151,7 @@ static ssize_t debugfs_trace_write(struct file *file,
 	VCHIQ_INSTANCE_T instance = f->private;
 	char firstchar;
 
-	if (copy_from_user(&firstchar, buffer, 1) != 0)
+	if (copy_from_user(&firstchar, buffer, 1))
 		return -EFAULT;
 
 	switch (firstchar) {
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 4/4] staging: vchiq: stop explicitly comparing with zero to catch errors

[Dan Carpenter]

On Thu, May 09, 2019 at 04:31:36PM +0200, Nicolas Saenz Julienne wrote:
> The vchiq code tends to follow a coding pattern that's not accepted as
> per the Linux kernel coding style
> 
> We have this:
> 	if (expression != 0)
> 
> We want this:
> 	if (expression)
> 
> We make an exception if the expression refers to a size, in which case
> it's accepted for the sake of clarity.

It's not really Linux kernel style, it's just my style...  I wouldn't
have complained if the original code were consistent one way or the
other.  But since I was encouraging you to pick a style and use it
consistently, then I'm always going to advocate my style...  :P

Anyway, thanks!  Looks good to me.

regards,
dan carpenter


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/4] staging: vchiq_2835_arm: revert "quit using custom down_interruptible()"

[Stefan Wahren]

On 09.05.19 16:31, Nicolas Saenz Julienne wrote:
> The killable version of down() is meant to be used on situations where
> it should not fail at all costs, but still have the convenience of being
> able to kill it if really necessary. VCHIQ doesn't fit this criteria, as
> it's mainly used as an interface to V4L2 and ALSA devices.
>
> Fixes: ff5979ad8636 ("staging: vchiq_2835_arm: quit using custom down_interruptible()")
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

This whole series is:

Acked-by: Stefan Wahren <stefan.wahren@i2se.com>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel