* [PATCH 2/2] arm64: dts: imx8mm: Add gpio-ranges property
2019-07-02 1:43 [PATCH 1/2] arm64: dts: imx8mq: Add gpio-ranges property Anson.Huang
@ 2019-07-02 1:44 ` Anson.Huang
2019-07-02 7:10 ` [PATCH 1/2] arm64: dts: imx8mq: " Abel Vesa
2019-07-18 8:14 ` Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Anson.Huang @ 2019-07-02 1:44 UTC (permalink / raw)
To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
leonard.crestez, viresh.kumar, ping.bai, daniel.baluta, l.stach,
abel.vesa, andrew.smirnov, angus, ccaione, agx, devicetree,
linux-arm-kernel, linux-kernel
Cc: Linux-imx
From: Anson Huang <Anson.Huang@nxp.com>
Add "gpio-ranges" property to establish connections between GPIOs
and PINs on i.MX8MM pinctrl driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index ea15457..b11fc5e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -312,6 +312,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 10 30>;
};
gpio2: gpio@30210000 {
@@ -324,6 +325,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 40 21>;
};
gpio3: gpio@30220000 {
@@ -336,6 +338,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 61 26>;
};
gpio4: gpio@30230000 {
@@ -348,6 +351,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 87 32>;
};
gpio5: gpio@30240000 {
@@ -360,6 +364,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 119 30>;
};
wdog1: watchdog@30280000 {
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH 1/2] arm64: dts: imx8mq: Add gpio-ranges property
2019-07-02 1:43 [PATCH 1/2] arm64: dts: imx8mq: Add gpio-ranges property Anson.Huang
2019-07-02 1:44 ` [PATCH 2/2] arm64: dts: imx8mm: " Anson.Huang
@ 2019-07-02 7:10 ` Abel Vesa
2019-07-18 8:14 ` Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Abel Vesa @ 2019-07-02 7:10 UTC (permalink / raw)
To: Anson Huang
Cc: mark.rutland, devicetree, Jacky Bai, ccaione, andrew.smirnov,
shawnguo, s.hauer, angus, linux-kernel, Daniel Baluta, robh+dt,
dl-linux-imx, kernel, viresh.kumar, Leonard Crestez, festevam,
agx, linux-arm-kernel, l.stach
On 19-07-02 09:43:59, Anson.Huang@nxp.com wrote:
> From: Anson Huang <Anson.Huang@nxp.com>
>
> Add "gpio-ranges" property to establish connections between GPIOs
> and PINs on i.MX8MQ pinctrl driver.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
For both patches:
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 477c523..3187428 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -287,6 +287,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> + gpio-ranges = <&iomuxc 0 10 30>;
> };
>
> gpio2: gpio@30210000 {
> @@ -299,6 +300,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> + gpio-ranges = <&iomuxc 0 40 21>;
> };
>
> gpio3: gpio@30220000 {
> @@ -311,6 +313,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> + gpio-ranges = <&iomuxc 0 61 26>;
> };
>
> gpio4: gpio@30230000 {
> @@ -323,6 +326,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> + gpio-ranges = <&iomuxc 0 87 32>;
> };
>
> gpio5: gpio@30240000 {
> @@ -335,6 +339,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> + gpio-ranges = <&iomuxc 0 119 30>;
> };
>
> tmu: tmu@30260000 {
> --
> 2.7.4
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH 1/2] arm64: dts: imx8mq: Add gpio-ranges property
2019-07-02 1:43 [PATCH 1/2] arm64: dts: imx8mq: Add gpio-ranges property Anson.Huang
2019-07-02 1:44 ` [PATCH 2/2] arm64: dts: imx8mm: " Anson.Huang
2019-07-02 7:10 ` [PATCH 1/2] arm64: dts: imx8mq: " Abel Vesa
@ 2019-07-18 8:14 ` Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2019-07-18 8:14 UTC (permalink / raw)
To: Anson.Huang
Cc: mark.rutland, devicetree, ping.bai, ccaione, andrew.smirnov,
viresh.kumar, s.hauer, angus, linux-kernel, daniel.baluta,
abel.vesa, robh+dt, Linux-imx, kernel, leonard.crestez, festevam,
agx, linux-arm-kernel, l.stach
On Tue, Jul 02, 2019 at 09:43:59AM +0800, Anson.Huang@nxp.com wrote:
> From: Anson Huang <Anson.Huang@nxp.com>
>
> Add "gpio-ranges" property to establish connections between GPIOs
> and PINs on i.MX8MQ pinctrl driver.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Applied both, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread