linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Guillaume La Roque <glaroque@baylibre.com>
To: daniel.lezcano@linaro.org, khilman@baylibre.com
Cc: devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Subject: [PATCH v3 4/6] arm64: dts: meson: sei510: Add minimal thermal zone
Date: Tue,  6 Aug 2019 15:05:04 +0200	[thread overview]
Message-ID: <20190806130506.8753-5-glaroque@baylibre.com> (raw)
In-Reply-To: <20190806130506.8753-1-glaroque@baylibre.com>

Add minimal thermal zone for two temperature sensor
One is located close to the DDR and the other one is
located close to the PLLs (between the CPU and GPU)

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
---
 .../boot/dts/amlogic/meson-g12a-sei510.dts    | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 979449968a5f..2c16a2cba0a3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -10,6 +10,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "seirobotics,sei510", "amlogic,g12a";
@@ -33,6 +34,53 @@
 		ethernet0 = &ethmac;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&cpu_temp>;
+
+			trips {
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&cpu_critical>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&ddr_temp>;
+
+			trips {
+				ddr_critical: ddr-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&ddr_critical>;
+					cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	mono_dac: audio-codec-0 {
 		compatible = "maxim,max98357a";
 		#sound-dai-cells = <0>;
@@ -321,6 +369,7 @@
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &cpu1 {
@@ -328,6 +377,7 @@
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &cpu2 {
@@ -335,6 +385,7 @@
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &cpu3 {
@@ -342,6 +393,7 @@
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &cvbs_vdac_port {
@@ -368,6 +420,10 @@
 	status = "okay";
 };
 
+&mali {
+	#cooling-cells = <2>;
+};
+
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-08-06 13:06 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-06 13:05 [PATCH v3 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Guillaume La Roque
2019-08-06 13:05 ` [PATCH v3 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal Guillaume La Roque
2019-08-21 19:31   ` Rob Herring
2019-08-06 13:05 ` [PATCH v3 2/6] thermal: amlogic: Add thermal driver to support G12 SoCs Guillaume La Roque
2019-08-11 15:43   ` Martin Blumenstingl
2019-08-06 13:05 ` [PATCH v3 3/6] arm64: dts: amlogic: g12: add temperature sensor Guillaume La Roque
2019-08-06 13:05 ` Guillaume La Roque [this message]
2019-08-06 19:24   ` [PATCH v3 4/6] arm64: dts: meson: sei510: Add minimal thermal zone Martin Blumenstingl
2019-08-06 13:05 ` [PATCH v3 5/6] arm64: dts: amlogic: odroid-n2: add " Guillaume La Roque
2019-08-06 19:25   ` Martin Blumenstingl
2019-08-06 13:05 ` [PATCH v3 6/6] MAINTAINERS: add entry for Amlogic Thermal driver Guillaume La Roque
2019-08-10  0:11 ` [PATCH v3 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Kevin Hilman
2019-08-21 21:30   ` Kevin Hilman
2019-08-14 12:24 ` Christian Hewitt
2019-08-21 21:19   ` guillaume La Roque

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190806130506.8753-5-glaroque@baylibre.com \
    --to=glaroque@baylibre.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).