[PATCH RESEND] ARM: dts: arndale: Add audio support (WM1811 CODEC boards)

[PATCH RESEND] ARM: dts: arndale: Add audio support (WM1811 CODEC boards)

[Sylwester Nawrocki]

Add sound node and the clock configurations for the I2S controller
for audio support on the Exynos5250 SoC Arndale boards with
WM1811 based audio daughter board.

We need to increase drive strength of the I2S bus, otherwise
the audio CODEC doesn't work. Likely the CODEC's master clock
is the main issue here.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes since v2:
 - none.
Changes since v1:
 - moved &clock, &clock_audss parts to preserve alphabetical order
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6fcb78a354fe..d6c85efdb465 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5250.dtsi"

 / {
@@ -135,6 +136,12 @@
 		};
 	};

+	sound {
+		compatible = "samsung,arndale-wm1811";
+		samsung,audio-cpu = <&i2s0>;
+		samsung,audio-codec = <&wm1811>;
+	};
+
 	fixed-rate-clocks {
 		xxti {
 			compatible = "samsung,clock-xxti";
@@ -151,6 +158,16 @@
 	};
 };

+&clock {
+	assigned-clocks = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-rates = <49152000>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+};
+
 &cpu0 {
 	cpu0-supply = <&buck2_reg>;
 };
@@ -502,9 +519,11 @@
 &i2c_3 {
 	status = "okay";

-	wm1811a@1a {
+	wm1811: codec@1a {
 		compatible = "wlf,wm1811";
 		reg = <0x1a>;
+		clocks = <&i2s0 CLK_I2S_CDCLK>;
+		clock-names = "MCLK1";

 		AVDD2-supply = <&main_dc_reg>;
 		CPVDD-supply = <&main_dc_reg>;
@@ -540,9 +559,15 @@
 };

 &i2s0 {
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
 	status = "okay";
 };

+&i2s0_bus {
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
+};
+
 &mali {
 	mali-supply = <&buck4_reg>;
 	status = "okay";
--
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH RESEND] ARM: dts: arndale: Add audio support (WM1811 CODEC boards)

[Krzysztof Kozlowski]

On Wed, Oct 02, 2019 at 05:28:31PM +0200, Sylwester Nawrocki wrote:
> Add sound node and the clock configurations for the I2S controller
> for audio support on the Exynos5250 SoC Arndale boards with
> WM1811 based audio daughter board.
> 
> We need to increase drive strength of the I2S bus, otherwise
> the audio CODEC doesn't work. Likely the CODEC's master clock
> is the main issue here.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> Changes since v2:
>  - none.
> Changes since v1:
>  - moved &clock, &clock_audss parts to preserve alphabetical order
> ---
>  arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++-

Thanks, applied.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel