From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org,
linux-sunxi <linux-sunxi@googlegroups.com>,
Jagan Teki <jagan@amarulasolutions.com>,
michael@amarulasolutions.com,
linux-arm-kernel@lists.infradead.org,
Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v11 2/7] drm/sun4i: dsi: Update start value in video start delay
Date: Thu, 3 Oct 2019 12:15:22 +0530 [thread overview]
Message-ID: <20191003064527.15128-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20191003064527.15128-1-jagan@amarulasolutions.com>
start value in video start delay was changed in
commit da676c6aa641 ("drm/sun4i: dsi: Change the start delay calculation")
to match the legacy BSP driver [1].
So, using this existing start delay computation gives the wrong
start delay value for the "bananapi,s070wv20-ct16" panel. Due to
this the panel trigger below flip_done timed out as during kernel bootup:
WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0
[CRTC:46:crtc-0] vblank wait timed out
Modules linked in:
CPU: 0 PID: 31 Comm: kworker/0:1 Tainted: G W 5.1.0-next-20190514-00025-gf928bc7cc146 #15
Hardware name: Allwinner sun8i Family
Workqueue: events deferred_probe_work_func
[<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14)
[<c010b76c>] (show_stack) from [<c0688c90>] (dump_stack+0x84/0x98)
[<c0688c90>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114)
[<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68)
[<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0)
[<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c)
[<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c)
[<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128)
[<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc)
[<c0411b64>] (restore_fbdev_mode_atomic) from [<c0411cb0>] (drm_fb_helper_pan_display+0xac/0x1d0)
[<c0411cb0>] (drm_fb_helper_pan_display) from [<c03a4e84>] (fb_pan_display+0xcc/0x134)
[<c03a4e84>] (fb_pan_display) from [<c03b1214>] (bit_update_start+0x14/0x30)
[<c03b1214>] (bit_update_start) from [<c03afe94>] (fbcon_switch+0x3d8/0x4e0)
[<c03afe94>] (fbcon_switch) from [<c03ec930>] (redraw_screen+0x174/0x238)
[<c03ec930>] (redraw_screen) from [<c03aceb4>] (fbcon_prepare_logo+0x3c4/0x400)
[<c03aceb4>] (fbcon_prepare_logo) from [<c03ad2b8>] (fbcon_init+0x3c8/0x5ac)
[<c03ad2b8>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104)
[<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390)
[<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4)
[<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc)
[<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84)
[<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60)
[<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20)
[<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8)
[<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c)
[<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8)
[<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118)
[<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160)
[<c043f060>] (sun4i_drv_bind) from [<c044b5b0>] (try_to_bring_up_master+0x164/0x1a0)
[<c044b5b0>] (try_to_bring_up_master) from [<c044b680>] (__component_add+0x94/0x140)
[<c044b680>] (__component_add) from [<c0445e1c>] (sun6i_dsi_probe+0x144/0x234)
[<c0445e1c>] (sun6i_dsi_probe) from [<c0452f0c>] (platform_drv_probe+0x48/0x9c)
[<c0452f0c>] (platform_drv_probe) from [<c04512e4>] (really_probe+0x1dc/0x2c8)
[<c04512e4>] (really_probe) from [<c0451530>] (driver_probe_device+0x60/0x160)
[<c0451530>] (driver_probe_device) from [<c044f7bc>] (bus_for_each_drv+0x74/0xb8)
[<c044f7bc>] (bus_for_each_drv) from [<c0451094>] (__device_attach+0xd0/0x13c)
[<c0451094>] (__device_attach) from [<c045048c>] (bus_probe_device+0x84/0x8c)
[<c045048c>] (bus_probe_device) from [<c0450918>] (deferred_probe_work_func+0x64/0x90)
[<c0450918>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420)
[<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0)
[<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c)
[<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xde539fb0 to 0xde539ff8)
9fa0: 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace 755e10f62b83f396 ]---
Console: switching to colour frame buffer device 100x30
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out
To fix this, adjust the start delay computation according to the
new BSP code [2].
Unfortunately we don't have any evidence or documentation for this
reassignment to 1 in new bsp, but it is working with below mainline
supported panels in A33, A64.
- bananapi,s070wv20-ct16
- feiyang,fy07024di26a30d
- techstar,ts8550b
So, use the start as per new bsp code since it is working in all
the supported panels.
[1] https://github.com/BPI-SINOVOIP/BPI-M2M-bsp/blob/master/linux-sunxi/drivers/video/sunxi/legacy/disp/de_bsp/de/ebios/de_dsi.c#L682
[2] https://github.com/BPI-SINOVOIP/BPI-M2M-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp/de/lowlevel_sun8iw5/de_dsi.c#L807
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index f83522717488..c9c99c52bf1e 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -365,7 +365,17 @@ static void sun6i_dsi_inst_init(struct sun6i_dsi *dsi,
static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi,
struct drm_display_mode *mode)
{
- u16 start = clamp(mode->vtotal - mode->vdisplay - 10, 8, 100);
+ /**
+ * Allwinner legacy (drivers/video/sunxi/legacy),
+ * new (drivers/video/sunxi/disp/de/lowlevel_sun8iw5) bsp drivers
+ * are evaluating start as:
+ *
+ * vtotal - vdisplay - 10
+ *
+ * but the new drivers are reassigning start to 1, which seems to be
+ * working in DSI panels available in mainline.
+ */
+ u8 start = 1;
u16 delay = mode->vtotal - (mode->vsync_end - mode->vdisplay) + start;
if (delay > mode->vtotal)
--
2.18.0.321.gffc6fa0e3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-03 6:46 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-03 6:45 [PATCH v11 0/7] drm/sun4i: dsi: Fixes/updates (A33 reworked!) Jagan Teki
2019-10-03 6:45 ` [PATCH v11 1/7] drm/sun4i: dsi: Fix TCON DRQ set bits Jagan Teki
2019-10-03 6:51 ` Icenowy Zheng
2019-10-03 6:55 ` [linux-sunxi] " Jagan Teki
2019-10-03 13:17 ` Maxime Ripard
2019-10-03 15:16 ` Jagan Teki
2019-10-07 11:19 ` Maxime Ripard
2019-10-03 6:45 ` Jagan Teki [this message]
2019-10-03 6:52 ` [PATCH v11 2/7] drm/sun4i: dsi: Update start value in video start delay Icenowy Zheng
2019-10-03 6:45 ` [PATCH v11 3/7] drm/sun4i: dsi: Fix video start delay computation Jagan Teki
2019-10-03 6:45 ` [PATCH v11 4/7] dt-bindings: sun6i-dsi: Add VCC-DSI supply property Jagan Teki
2019-10-03 11:47 ` Maxime Ripard
2019-10-03 13:04 ` Icenowy Zheng
2019-10-03 13:30 ` Maxime Ripard
2019-10-03 6:45 ` [PATCH v11 5/7] drm/sun4i: sun6i_mipi_dsi: Add VCC-DSI regulator support Jagan Teki
2019-10-03 6:55 ` Chen-Yu Tsai
2019-10-03 7:01 ` Jagan Teki
2019-10-03 11:46 ` Maxime Ripard
2019-10-03 6:45 ` [PATCH v11 6/7] drm/panel: Add Bananapi S070WV20-CT16 ICN6211 MIPI-DSI to RGB bridge Jagan Teki
2019-10-03 6:50 ` Jagan Teki
2019-10-03 6:45 ` [PATCH v11 7/7] ARM: dts: sun8i: bananapi-m2m: Enable Bananapi S070WV20-CT16 DSI panel Jagan Teki
2019-10-03 6:50 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191003064527.15128-3-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=icenowy@aosc.io \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=michael@amarulasolutions.com \
--cc=mripard@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).